GLOBO 24002S

GLOBO 24002S NARRI Table Lamp Instruction Manual

Model: 24002S

1. Introduction

Thank you for purchasing the GLOBO 24002S NARRI Table Lamp. This manual provides important information regarding the safe installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

GLOBO 24002S NARRI Table Lamp, matte black metal with gold interior and decorative cutouts

Image 1: The GLOBO 24002S NARRI Table Lamp, featuring a matte black metal shade with intricate decorative cutouts revealing a gold interior, resting on a gold base.

The GLOBO 24002S NARRI Table Lamp is designed to provide ambient lighting with a modern aesthetic. It features a durable metal construction with a matte black finish and a gold-colored interior, creating a unique light pattern through its decorative cutouts. The lamp includes a 1.5-meter electrical cable with an inline switch for convenient operation.

2. Important Safety Instructions

  • Always disconnect the lamp from the power supply before cleaning, changing the bulb, or performing any maintenance.
  • Do not use the lamp in wet or damp conditions. This lamp is intended for indoor use only.
  • Ensure the voltage rating of the lamp matches your local power supply before connecting.
  • Use only bulbs of the specified type and wattage (E27, max 40W). Exceeding the maximum wattage can cause overheating and damage.
  • Keep the lamp away from flammable materials.
  • Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
  • Keep the electrical cable away from heat sources, sharp edges, and moving parts.
  • This product is not a toy. Keep out of reach of children.

3. Package Contents

Please check the package contents upon opening. You should find the following items:

  • 1 x GLOBO 24002S NARRI Table Lamp (assembled body with cable and switch)
  • Instruction Manual

Note: The E27 bulb is not included and must be purchased separately.

4. Setup and Installation

  1. Unpack the Lamp: Carefully remove all packaging materials from the lamp. Inspect the lamp for any signs of damage.
  2. Choose a Location: Place the lamp on a stable, flat surface indoors, away from moisture and direct heat sources.
  3. Install the Bulb:
    • Ensure the lamp is unplugged from the power outlet.
    • Gently screw an E27 bulb (maximum 40W) into the lamp holder until it is secure. Do not overtighten.
  4. Connect to Power: Insert the power plug into a suitable electrical outlet.
Close-up of the GLOBO 24002S NARRI lamp shade showing decorative cutouts and gold interior

Image 2: A close-up view of the lamp's metal shade, highlighting the intricate cutouts and the warm gold finish of the interior, which creates a unique light diffusion effect.

5. Operating Instructions

The GLOBO 24002S NARRI Table Lamp is operated using the inline switch located on the power cable.

  1. Turning On: Locate the inline switch on the power cable. Press the "I" side of the rocker switch to turn the lamp on.
  2. Turning Off: Press the "O" side of the rocker switch to turn the lamp off.
Close-up of the inline rocker switch on the lamp's power cable

Image 3: The inline rocker switch on the lamp's power cable, used for turning the light on and off.

6. Maintenance

Regular maintenance will help prolong the life and appearance of your lamp.

  • Cleaning:
    • Always unplug the lamp before cleaning.
    • Wipe the lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
    • Avoid getting moisture into any electrical parts.
  • Bulb Replacement:
    • Ensure the lamp is unplugged and the bulb has cooled down completely.
    • Carefully unscrew the old E27 bulb.
    • Screw in a new E27 bulb (maximum 40W).

7. Troubleshooting

If you encounter any issues with your lamp, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lamp does not turn on.
  • 1. Lamp is not plugged in.
  • 2. Power outlet is not working.
  • 3. Bulb is faulty or not screwed in properly.
  • 4. Switch is in the OFF position.
  • 1. Ensure the power plug is fully inserted into the outlet.
  • 2. Test the outlet with another appliance.
  • 3. Replace the bulb or ensure it is securely screwed in.
  • 4. Press the "I" side of the inline switch.
Light is flickering.
  • 1. Loose bulb connection.
  • 2. Faulty bulb.
  • 1. Tighten the bulb.
  • 2. Replace the bulb.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

FeatureDetail
BrandGLOBO
Model Number24002S
ManufacturerGlobo Lighting
Product Dimensions (L x W x H)14.5 x 15 x 23 cm
Item Weight510 grams
StyleModern
ColorMatte Black with Gold Interior
ShapeRound
MaterialMetal
Finish TypeMatte
Number of Bulbs1
Bulb BaseE27
Max Wattage40 Watts
Compatible Bulb TypeLED
Switch TypeInline Rocker Switch
Cable Length1.5 meters
Installation TypeTable Mounting

9. Warranty and Support

This product is covered by the standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, replacement parts, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.

Manufacturer: Globo Lighting

© 2024 GLOBO Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.