Giantex Vanity Table Set with Tri-Folding Mirror Instruction Manual

Introduction

Thank you for purchasing the Giantex Vanity Table Set with Tri-Folding Mirror. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity set. Please read these instructions carefully before beginning assembly and retain them for future reference.

Overall view of the Giantex Vanity Table Set with tri-folding mirror and padded stool.

Safety Information

• Always assemble the vanity set on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches or damage to the furniture.
• Ensure all screws, bolts, and fasteners are tightened securely before using the vanity table or stool. Periodically check and re-tighten as needed.
• Do not overload the drawers or place excessively heavy items on the table surface to maintain stability and prevent damage.
• Keep small parts and hardware away from children during assembly to prevent choking hazards.
• Avoid standing on the stool or table. The stool is designed for seating only.

Package Contents

Before assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.

• Vanity Table Top
• Vanity Table Legs (4x)
• Tri-Folding Mirror Assembly
• Small Drawers (2x)
• Large Drawers (2x)
• Stool Seat
• Stool Legs (4x)
• Hardware Pack (screws, bolts, washers, Allen wrench)

Note: Refer to the actual packing list included in your box for a complete and accurate inventory.

Assembly Instructions

Follow these steps carefully to assemble your Giantex Vanity Table Set.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface. Verify all components are present against the packing list.
2. Assemble Vanity Table Base: Attach the four table legs to the main table frame using the provided hardware. Ensure they are securely fastened.
3. Attach Mirror Assembly: Place the tri-folding mirror assembly onto the designated area on the table top. Secure it with the appropriate screws from the hardware pack.
4. Insert Drawers: Slide the two small drawers into their respective slots on the table top. Insert the two larger drawers into the main table frame.
5. Assemble Stool: Attach the four stool legs to the stool seat using the provided hardware. Tighten all connections.
6. Final Check: Ensure all parts are correctly assembled and all fasteners are tight.

Illustration showing the top mirror section as detachable, allowing the vanity table to be used as a writing desk.

Diagram illustrating the full dimensions of the vanity table and stool, including height, width, and depth measurements.

Operating Instructions

• Tri-Folding Mirror: The side mirrors are designed to pivot up to 180 degrees, allowing you to adjust them for various viewing angles. Gently pivot them to your desired position.
• Drawers: The vanity features two small removable drawers on the table top, ideal for storing small items such as lipstick, jewelry, or eyebrow pencils. Two larger drawers are located below the table top for additional storage of cosmetics or accessories.
• Detachable Top: The mirror assembly can be detached from the main table, transforming the vanity into a functional writing desk. To detach, carefully remove the screws securing the mirror assembly to the table top.

Close-up of the tri-folding mirror, demonstrating its 180-degree spinning capability for adjustable viewing angles.

Detailed view highlighting the tri-folding mirror, round table corner, exquisite retro drawer handle, and spacious storage space within the drawers.

Maintenance

• Cleaning: Wipe all surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Wood Care: To preserve the solid wood components, avoid prolonged exposure to direct sunlight, extreme temperatures, or high humidity, which can cause warping or cracking.
• Hardware: Periodically inspect and tighten all screws and bolts to ensure the stability and longevity of the vanity set.
• Stool Cushion: Spot clean the padded stool cushion with a mild fabric cleaner as needed. Allow to air dry completely.

Details of the padded stool, showing the comfortable cushion and anti-scratch feet for floor protection.

Troubleshooting

• Wobbly Table or Stool: Ensure all leg attachments are fully tightened. If wobbling persists, check that the legs are evenly installed and on a flat surface.
• Drawers Stick or Don't Slide Smoothly: Verify that the drawers are inserted correctly into their slides and are not overloaded. Check for any obstructions within the drawer tracks.
• Mirror Swings Too Easily: If the side mirrors do not hold their desired position, gently check the tightness of the pivot screws that allow the mirrors to rotate.
• Missing or Damaged Parts: If you discover any missing or damaged parts upon unboxing, please contact Giantex customer support immediately with your product model and purchase information for assistance.

Specifications

Warranty and Support

For specific warranty information, product registration, or technical support, please refer to any additional documentation included with your purchase or visit the official Giantex website. You may also contact Giantex customer service directly through their provided contact channels.