TAGU 23PF1
TAGU PowerFlame Electric Insert Fireplace User Manual
Model: 23PF1 | Brand: TAGU
Introduction
Thank you for choosing the TAGU PowerFlame Electric Insert Fireplace. This manual provides essential information for the safe and efficient operation of your new fireplace. Please read it thoroughly before installation and use, and retain it for future reference.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this fireplace.
- Do not operate any fireplace with a damaged cord or plug, or if the fireplace has been dropped or damaged in any manner.
- Do not use outdoors.
- Avoid placing the power cord under carpeting or covering it with throw rugs, runners, or similar coverings.
- To disconnect the fireplace, turn controls to off, then remove the plug from the outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
- This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Package Contents
Please check that all items are present and undamaged:
- TAGU PowerFlame Electric Firebox
- Remote Control
- User Manual
- (Optional, depending on purchase) Installation Kit

Figure 1: Angled view of the TAGU PowerFlame Electric Insert Fireplace.
Setup and Installation
The TAGU PowerFlame fireplace features a slim design with a depth of only 15 cm, allowing for versatile installation.
Installation Options:
- Wall or Permanent Structure Installation: For this method, you will need to acquire the Firebox along with an Installation Kit. This kit is essential as the firebox is mounted from the front.
- Furniture or Wooden Mantel Installation: If installing into existing furniture or a wooden mantel, only the Firebox is required. An installation kit is not needed if the firebox can be mounted from the rear.
Dimensions:
The product dimensions are approximately 60 cm (width) x 15 cm (depth) x 50.3 cm (height).

Figure 2: Installation diagram showing key dimensions (584mm width, 495mm height, 150mm depth).

Figure 3: Front view of the fireplace, showing the flame effect and control panel.

Figure 4: Side view illustrating the slim profile of the fireplace.

Figure 5: Rear view of the fireplace, showing mounting points.
Operating Instructions
The TAGU PowerFlame fireplace offers various functions for comfort and ambiance.
Power and Heating:
- The fireplace can operate with or without heating. Use it solely for the ambient flame effect, or activate the built-in 1500W heater to warm your room.
- The heater's sound is comparable to soft rain. It is capable of heating rooms up to 37 square meters.
Temperature Control and Programming:
- An integrated digital thermostat allows for precise temperature adjustment.
- Utilize the advanced 7-day programmable schedule to set an automatic heating timetable for each day of the week, optimizing energy efficiency.
LED Flame Technology:
- The flame effect consumes only 10W, which is less than a standard light bulb, contributing to energy savings.
- Adjust the brightness of the flames to perfectly suit your environment and mood.
Remote Control:
All functions of your electric fireplace can be controlled using the included PowerFlame remote control.

Figure 6: The PowerFlame remote control for convenient operation.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your fireplace.
- Cleaning: Ensure the fireplace is turned off and unplugged before cleaning. Use a soft, damp cloth to wipe down exterior surfaces. Do not use abrasive cleaners or sprays.
- Ventilation: Keep the ventilation openings clear of dust and debris to ensure proper airflow for the heater.
- Storage: If storing the fireplace for an extended period, ensure it is clean and dry. Store in a cool, dry place.
Troubleshooting
If you encounter issues with your fireplace, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power, power cord not plugged in, circuit breaker tripped. | Check power outlet, ensure cord is securely plugged in, reset circuit breaker. |
| No heat output. | Heater function not activated, thermostat set too low, overheating protection activated. | Activate heater function, increase thermostat setting, unplug and allow to cool for 15 minutes before restarting. |
| Flame effect not working. | Flame effect turned off, LED issue. | Ensure flame effect is turned on via remote or control panel. If issue persists, contact support. |
| Remote control not working. | Dead batteries, obstruction, remote out of range. | Replace batteries, remove obstructions, ensure remote is within operating range. |
If the problem persists after attempting these solutions, please contact TAGU customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | TAGU |
| Model Number | 23PF1 |
| Color | Black |
| Product Dimensions (L x W x H) | 60 x 15 x 50.3 cm |
| Product Weight | 9.3 kg |
| Power Output | 1500 Watts |
| Voltage | 220 Volts |
| Material | Metal |
| Special Features | LED Flame, Adjustable Flame, Dimmer, Timer, Adjustable Thermostat |
| Installation Type | Wall Mount (or insert into furniture/mantel) |
| Power Source | Corded Electric |
Warranty and Support
TAGU products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official TAGU website.
For technical support, troubleshooting assistance, or spare parts, please contact TAGU customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.
Product first available on Amazon.es: November 22, 2018.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







