Philips SPC62 Power Strip Surge Protector User Manual

1. Product Overview

The Philips SPC62 Power Strip Surge Protector is designed to provide power and protection for your electronic devices. It features four grounded AC outlets and two standard USB ports, offering 2.4 amps (12 watts) of charging power. This unit incorporates 720 Joules of surge protection, an integrated circuit breaker for overload protection, and automatic shutdown technology to safeguard connected equipment.

Image 1: The Philips SPC62 Power Strip Surge Protector, showcasing its sleek black design with four AC outlets and two USB charging ports.

2. Key Features

• 4 Grounded AC Outlets: Provides power for up to four electronic devices.
• 2 USB Charging Ports: Delivers 2.4 Amps (12 Watts) for charging mobile devices.
• 720 Joules Surge Protection: Protects connected equipment from power surges.
• Integrated Circuit Breaker: Offers overload protection for AC outlets.
• Automatic Shutdown Technology: Discontinues power to devices once surge protection capacity is exhausted.
• 4-Foot Braided Power Cord: Durable, tangle-resistant cord for extended reach.
• Flat Plug: Space-saving design allows furniture to be placed closer to the wall.
• Keyholes for Wall Mounting: Enables secure installation on a wall or desk.

Image 2: A detailed diagram highlighting the features of the Philips SPC62, including the 4 ft power cord, 4 AC grounded outlets, 2.4 AMP USB ports, power switch with integrated circuit breaker, 720 Joules protection, and automatic shutdown technology.

3. Setup Instructions

1. Unpack the Device: Carefully remove the power strip from its packaging.
2. Connect to Wall Outlet: Plug the power strip's flat plug into a standard, grounded 3-prong wall outlet. The flat plug design allows for placement behind furniture without obstruction.


Image 3: The flat plug of the Philips SPC62, designed to save space and allow furniture to sit closer to the wall outlet.

3. Connect Devices: Plug your electronic devices into the AC outlets and your mobile devices into the USB charging ports. Ensure that the total power draw does not exceed the power strip's maximum rating.
4. Power On: Press the power switch on the power strip to supply power to the connected devices. The switch will illuminate when power is active.
5. Optional Wall Mounting: If desired, use the keyholes on the back of the power strip to mount it securely to a wall or under a desk. Ensure appropriate screws and anchors are used for the mounting surface.

Image 4: The keyholes on the back of the Philips SPC62 for convenient wall mounting, providing flexible placement options.

4. Operating Instructions

Once the power strip is connected to a wall outlet and devices are plugged in, press the illuminated power switch to activate power. The power strip will then supply power to all connected AC outlets and USB ports.

USB Charging

The two USB ports provide 2.4 Amps of charging power, suitable for smartphones, tablets, and other USB-powered devices. Simply connect your device's USB charging cable to one of the ports.

Image 5: The Philips SPC62 actively charging a smartphone and a tablet, demonstrating its 2.4 AMP USB charging capability.

Surge Protection

The power strip continuously monitors incoming power for surges. In the event of a power surge exceeding 720 Joules, the automatic shutdown technology will activate, disconnecting power to your devices to prevent damage. If this occurs, the power strip's surge protection capacity has been exhausted, and the unit should be replaced.

Overload Protection

The integrated circuit breaker protects against overloads. If the total current draw from the AC outlets exceeds the maximum rating, the circuit breaker will trip, cutting power to prevent damage. To reset, unplug some devices and press the circuit breaker button (often integrated into the power switch).

5. Safety Information

• For indoor use only. Do not expose to moisture.
• Do not exceed the electrical ratings of the power strip.
• Do not use with aquariums or near water sources.
• Do not connect to another relocatable power tap or extension cord.
• Ensure the power strip is plugged into a properly grounded outlet.
• If the surge protection indicator light is off, the surge protection has expired, and the unit should be replaced.

6. Maintenance

The Philips SPC62 Power Strip Surge Protector requires minimal maintenance. Keep the unit clean and free from dust. Disconnect from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.

7. Troubleshooting

• No Power to Devices:
  • Ensure the power strip's power switch is pressed and illuminated.
  • Check if the power strip is securely plugged into a functioning wall outlet.
  • If the power switch is also a circuit breaker, it may have tripped due to an overload. Unplug some devices and press the switch to reset.
  • If the surge protection indicator is off, the surge protection has expired, and the unit needs replacement.
• USB Ports Not Charging:
  • Ensure the power strip is receiving power.
  • Verify the USB cable is properly connected to both the device and the power strip.
  • Test with a different USB cable or device to rule out cable/device issues.

8. Specifications

9. Warranty and Support

Connected Equipment Warranty

This Philips Power Strip Surge Protector includes a connected equipment warranty of up to $75,000. This warranty provides coverage for equipment properly connected to the surge protector that is damaged by a power surge while the surge protector is functioning correctly.

Customer Support

For further assistance, technical support, or warranty claims, please refer to the contact information provided with your product packaging or visit the official Philips website for support resources.