Introduction
This instruction manual provides essential information for the safe assembly, operation, and maintenance of your DHP Miles Metal Full-over-Full Bunk Bed. Please read this manual thoroughly before assembly and retain it for future reference.
Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Maximum Weight Limits: The top bunk supports up to 300 lbs. The bottom bunk supports up to 450 lbs.
- Guard Rails: The top bunk is equipped with 12.5-inch full-length guard rails to ensure safety. These must always be in place.
- Integrated Ladder: The 3-step ladder is integrated into the frame for secure access to the top bunk. Ensure it is properly secured during assembly.
- Mattress Requirements: Use only full-size mattresses. The maximum recommended mattress thickness is 6 inches for both bunks. No box spring is needed.
- Age Restriction: The top bunk is not suitable for children under 6 years of age.
- Prohibition of Play: Do not allow children to play on or under the bunk bed. Do not allow more than one person on the top bunk.
- Ventilation: Metal slats allow for better air circulation for mattresses, contributing to their longevity.
- Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Setup & Assembly
The DHP Miles Metal Bunk Bed requires assembly. All necessary tools and detailed instructions are included in the packaging. For a stress-free assembly experience, it is recommended to follow the instructions carefully. Assembly typically requires two adults.
Figure 1: Assembled dimensions of the DHP Miles Metal Full-over-Full Bunk Bed. Dimensions are 77.5"L x 56.5"W x 54"H.
Assembly Tips:
- Review all parts and hardware before beginning.
- Do not fully tighten bolts until all components are loosely assembled.
- Ensure all holes and braces are correctly aligned as per the instruction booklet.
Video 1: Assembly Demonstration. This video provides a visual guide to the assembly process, highlighting key steps and tips for a smooth setup.
Operating & Features
The DHP Miles Metal Bunk Bed is designed for functionality and durability, offering a space-saving solution with enhanced safety features.
Figure 2: The DHP Miles Metal Full-over-Full Bunk Bed, showcasing its streamlined design and blue finish.
Key Features:
- Full-over-Full Design: Accommodates two full-size mattresses, ideal for maximizing sleeping space in smaller rooms.
- Low Profile Bottom Bunk: The lower bunk is designed to be close to the ground, making it easily accessible.
- Sturdy Metal Construction: Crafted with strong, solid metal and a premium powder-coated finish for durability and resistance against corrosion and rust.
- Integrated Ladder: A 3-step ladder is securely integrated into the frame for safe and easy access to the top bunk.
- 12.5" Guard Rails: Full-length guard rails on the top bunk provide essential safety for the sleeper.
- No Box Spring Required: Heavy-duty metal slats provide ample support for mattresses, eliminating the need for a box spring.
Figure 3: Detailed view of the low profile bottom bunk, high guard rails, and the easy-to-climb integrated ladder.
Maintenance
To maintain the quality and appearance of your DHP Miles Metal Bunk Bed, follow these simple care instructions:
- Cleaning: Wipe the metal frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Tighten as necessary to maintain stability and safety.
- Mattress Care: Ensure mattresses are properly sized and placed to prevent shifting. The metal slats promote air circulation, but regular mattress rotation can further extend mattress life.
Specifications
| Feature | Detail |
|---|---|
| Size | Full/Full |
| Product Dimensions | 56.5"L x 77.5"W x 54"H |
| Color | Blue |
| Finish Type | Metal |
| Material | Metal |
| Special Feature | Assembly Required, Fire Resistant |
| Included Components | DHP 4306619 Miles Metal Full, Blue Bunk Bed Blue |
| Compatible With Mattress Size | Full |
| Assembly Required | Yes |
| Ground To Item Distance | 6 Inches |
| Item Weight | 97 pounds |
| Item Model Number | 4306619 |
| UPC | 029986430625 |
Warranty & Support
Your DHP Miles Metal Bunk Bed comes with a 1-year limited warranty.
For any questions regarding assembly, parts, or general inquiries, customer support is available 7 days a week via phone, email, or chat. Please refer to the contact information provided in your product packaging or visit the official DHP website for assistance.
Figure 4: DHP Customer Support information.