Commercial Electric NS01aA11FR1-259
Commercial Electric 5/6-inch Integrated LED Recessed Trim User Manual
Model: NS01aA11FR1-259
Introduction
This manual provides instructions for the installation, operation, and maintenance of your Commercial Electric 5/6-inch Integrated LED Recessed Trim. This product is designed to upgrade existing 5 and 6-inch can lights with energy-efficient LED technology and offers adjustable color temperature settings.

Figure 1: Commercial Electric 5/6-inch Integrated LED Recessed Trim product packaging, showing key features and color temperature options.
Safety Information
- Always disconnect power at the circuit breaker before installation or servicing.
- Ensure all electrical connections comply with local codes and ordinances.
- This product is rated for use in wet locations.
- Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
Setup and Installation
The LED recessed trim is designed for easy installation into existing 5-inch or 6-inch recessed housings. A medium (E26) socket base adapter is included for direct connection.
- Prepare the Existing Fixture: Disconnect power at the circuit breaker. Carefully remove the existing light bulb and trim from your recessed can. If your existing can has spring-loaded clips, you may need to remove them.
- Connect the Adapter: Screw the provided E26 socket base adapter into the existing light socket within the recessed can.
- Attach the LED Trim: Connect the wire from the E26 adapter to the corresponding connector on the back of the LED recessed trim. Ensure a secure connection.
- Select Color Temperature: Before inserting the trim into the ceiling, use the integrated switch on the back of the LED trim to select your desired color temperature (see "Operating Instructions" for details).
- Secure the Trim: Gently push the LED recessed trim into the can opening. The spring-loaded clips on the sides of the trim will secure it in place. Ensure the trim sits flush with the ceiling.
- Restore Power: Once installation is complete, restore power at the circuit breaker.

Figure 2: Rear view of the LED recessed trim, illustrating the E26 adapter connection point and the color temperature selection switch.

Figure 3: Front view of the LED recessed trim, showing its sleek, integrated design when installed.
Operating Instructions
Color Temperature Selection (CCT)
The LED recessed trim features an integrated switch on the back that allows you to select from five different color temperatures:
- Warm White (2700K): A soft, yellowish light, similar to traditional incandescent bulbs.
- Soft White (3000K): A slightly whiter light than warm white, still with a warm tone.
- Neutral White (3500K): A balanced white light, often used in offices or kitchens.
- Bright White (4000K): A cooler, more energetic white light.
- Daylight (5000K): A very cool, bluish-white light, mimicking natural daylight.
To change the color temperature, locate the switch on the back of the trim (refer to Figure 2) and slide it to your desired setting. It is recommended to select the color temperature before fully installing the trim into the ceiling.
Dimming Functionality
This LED recessed trim is fully dimmable. Ensure you use a compatible dimmer switch for optimal performance. Refer to your dimmer switch's instructions for proper operation.
Maintenance
The Commercial Electric Integrated LED Recessed Trim is designed to be maintenance-free. It features integrated LED technology, meaning no bulbs need to be replaced. The estimated lifetime is 50,000 hours, or approximately 34 years under typical usage conditions.
To clean the trim, ensure power is disconnected and gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, faulty switch. | Check circuit breaker. Ensure all connections are secure. Test with a known working switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch, loose wiring. | Ensure dimmer is LED compatible. Check wiring connections. |
| Incorrect color temperature. | CCT switch set incorrectly. | Adjust the CCT switch on the back of the trim to the desired setting. |
If troubleshooting steps do not resolve the issue, please contact customer support.
Specifications
- Brand: Commercial Electric
- Model Number: NS01aA11FR1-259
- UPC: 723834567951
- Size: 5/6 inch (compatible with 5 and 6 inch recessed cans)
- Brightness: 700 Lumens
- Wattage: 9 Watts
- Voltage: 120 Volts
- Color Temperature: Selectable (2700K, 3000K, 3500K, 4000K, 5000K)
- Color Rendering Index (CRI): 90
- Lifetime: 50,000 hours
- Bulb Base: E26 (adapter included)
- Material: Aluminum, Plastic
- Finish Type: Soft White
- Special Features: Dimmable, Shatter resistant
- Certifications: ENERGY STAR, UL Classified
- Indoor/Outdoor Usage: Outdoor (Wet Location Rated)
Warranty
This Commercial Electric LED Recessed Trim comes with a 5-year limited warranty. For detailed warranty information or to make a claim, please refer to the original product packaging or contact Commercial Electric customer support.
Customer Support
For technical assistance, replacement parts, or general inquiries, please contact Commercial Electric customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.