1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Viugreum 100W LED Flood Light Outdoor. Please read these instructions carefully before use and retain them for future reference.
2. Product Features
- Bright & Ultra-Thin Design: Provides 10000 lumens brightness output with a 120° wide beam angle. Energy saving up to 70% compared to traditional lights.
- Excellent Heat Dissipation: Features an ultra-thin die-cast aluminum body and high-purity aluminum reflective film for efficient heat dissipation, extending the lifespan of the LED bulbs.
- IP65 Waterproof Rating: Designed for outdoor use, capable of withstanding rain and snow. Note: The floodlight cannot be used submerged in water.
- Simple Installation: Equipped with a 180° adjustable metal bracket for flexible installation on ceilings, walls, or the ground.
- Wide Application: Suitable for both outdoor and indoor lighting in gardens, yards, basements, garages, stadiums, docks, factories, parks, and other areas requiring bright illumination.
Figure 2.1: The floodlight features an IP65 waterproof and dust-resistant aluminum body, making it suitable for various indoor and outdoor environments.
Figure 2.2: High-performance LED chips provide excellent light output and power efficiency.
Figure 2.3: The efficient heat dissipation design with an aluminum housing extends the lifespan of the light.
Figure 2.4: The 180° adjustable bracket allows for versatile mounting options including ground, wall, rooftop, and ceiling installations.
Figure 2.5: The floodlight provides 100W of power, 10000LM brightness, and a warm white 3000K color temperature with a 120° beam angle.
Figure 2.6: Examples of wide application for the floodlight, including sports fields, backyards, and public spaces.
3. Package Contents
- 1 x Viugreum 100W LED Flood Light
- 1 x 180° Adjustable Metal Bracket (pre-attached)
- Wiring Connectors (for hardwiring, if applicable)
4. Safety Instructions
- Always disconnect power before installation, maintenance, or cleaning.
- Ensure the power supply voltage matches the product's requirements (110V).
- Do not operate the floodlight if the power cord or plug is damaged.
- Avoid direct eye exposure to the light source when illuminated.
- Keep away from flammable materials.
- Ensure proper grounding to prevent electrical shock.
- This product is rated IP65 for water and dust resistance. Do not submerge in water.
- Installation should be performed by a qualified electrician if you are unsure about wiring procedures.
5. Setup & Installation
5.1 Wiring Instructions
The floodlight comes with a pre-attached power cord. For hardwiring applications, connect the wires as follows:
- Connect the blue wire from the floodlight to the neutral wire of your power supply.
- Connect the brown wire from the floodlight to the live/hot wire of your power supply.
- Connect the yellow/green wire (ground) from the floodlight to the ground wire of your power supply.
Ensure all connections are secure and properly insulated using appropriate wiring connectors. Refer to the video below for a visual guide on wiring and initial setup.
Video 5.1: This video demonstrates the wiring process and initial setup of the Viugreum 100W LED Flood Light, including connecting the power cables and adjusting the bracket.
5.2 Mounting the Floodlight
The integrated 180° adjustable metal bracket allows for flexible mounting. Choose a suitable location and secure the bracket using appropriate screws and anchors (not included) for your surface type (e.g., wood, concrete, masonry). Adjust the angle of the floodlight to direct illumination as needed.
- Wall Mounting: Secure the bracket to a sturdy wall surface.
- Ground Mounting: The bracket can be used to position the light on the ground, or it can be secured to a flat surface.
- Ceiling/Rooftop Mounting: Attach the bracket to an overhead structure, ensuring it can support the weight of the fixture.
6. Operating Instructions
Once properly installed and wired, connect the floodlight to a 110V power source. The light will illuminate immediately. There are no external switches on the unit itself; operation is controlled by the power supply it is connected to (e.g., a wall switch, timer, or smart plug).
7. Maintenance
- Cleaning: Periodically clean the surface of the floodlight with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Inspection: Regularly check the power cord and connections for any signs of damage or wear. Replace any damaged components immediately.
- Waterproof Seal: The IP65 rating ensures protection against water jets and dust. Do not attempt to open the sealed unit, as this may compromise its waterproof integrity and void the warranty.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring connection; Damaged unit | Check power source and circuit breaker; Verify all wiring connections are secure; Contact customer support if unit is damaged. |
| Light is dim or flickers | Insufficient power; Loose connection; Unit defect | Ensure stable 110V power supply; Check wiring connections; Contact customer support. |
| Water inside the unit | Compromised waterproof seal; Improper installation | Immediately disconnect power. Do not attempt to repair. Contact customer support for warranty claim. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | Viugreum |
| Model Number | D6NPT-08083 |
| Wattage | 100 Watts |
| Brightness | 10000 Lumens |
| Voltage | 110 Volts |
| Light Color | Warm White (3000K) |
| Beam Angle | 120° |
| Material | Aluminum, Polycarbonate |
| Water Resistance Level | IP65 Waterproof |
| Mounting Type | Wall Mount (with 180° adjustable bracket) |
| Item Weight | 0.71 Kilograms |
| Item Dimensions (L x W x H) | 86.22"L x 61.81"W x 15.35"H (Note: These dimensions seem unusually large for a floodlight of this wattage and weight. Please verify actual product dimensions if precise measurements are critical.) |
| UPC | 723585455125 |
10. Warranty and Support
This Viugreum 100W LED Flood Light is covered by a 1-year limited warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims, technical support, or any questions regarding your product, please contact Viugreum customer service through the retailer where the product was purchased or visit the official Viugreum website for contact information.