Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Revell RV01205 AT-AT Star Wars Plastic Model Kit. This highly detailed 1/144 scale model allows enthusiasts to recreate the iconic All Terrain Armored Transport from the Star Wars universe. Please read all instructions carefully before beginning assembly.
Image: The Revell RV01205 AT-AT Star Wars Plastic Model Kit, showcasing its detailed design and scale.
Warning: Not suitable for children under 36 months due to small parts. Choking hazard.
Setup and Assembly
The Revell RV01205 AT-AT model kit features a pre-colored, clip-together design, minimizing the need for paint and glue. The kit contains 161 pieces. Follow these steps for assembly:
- Unpack Components: Carefully remove all plastic parts from the packaging. Identify the different sprues and compare them with the parts list in the included diagram.
- Prepare Parts: Detach each piece from its sprue using a hobby knife or side cutters. Ensure clean cuts to avoid damaging the parts. Smooth any rough edges with a hobby file or sandpaper.
- Assemble Body Sections: Begin by assembling the main body sections as indicated in the instruction diagrams. The clip-together design ensures a secure fit.
- Cockpit Assembly: Assemble the detailed cockpit, including the two seated pilot figures. Note the red-tinted viewport.
- Leg and Foot Assembly: Construct the four articulated legs and feet. Pay attention to the orientation for proper posing.
- Head and Weapons: Attach the head section and any weaponry according to the diagrams.
- Apply Markings: Use either the provided stickers or waterslide decals to apply the desired markings to your model. Refer to the placement guide for accuracy.
- Display Base: Assemble the included 'Hoth' section display base and attach the completed AT-AT model.
For best results, take your time and follow the step-by-step illustrations provided in the kit's internal instruction booklet.
Display and Posing
Once assembled, your Revell AT-AT model is designed for display. The articulated legs allow for various dynamic poses. The included 'Hoth' section display base provides a stable and thematic platform for showcasing your model.
- Ensure the model is placed on a flat, stable surface to prevent accidental falls.
- Adjust the leg positions carefully to achieve desired stances. Avoid excessive force to prevent damage to joints.
- The detailed cockpit with its red-tinted viewport and seated pilots can be viewed by adjusting the head section.
Maintenance
To ensure the longevity and appearance of your Revell AT-AT model, follow these simple maintenance guidelines:
- Dusting: Regularly dust the model with a soft, dry brush or a can of compressed air to prevent dust buildup in crevices.
- Cleaning: For more stubborn dirt, gently wipe the surface with a slightly damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the plastic or decals.
- Storage: If storing the model, keep it in a cool, dry place away from direct sunlight to prevent material degradation or color fading.
- Handling: Handle the model by its main body sections rather than delicate parts like antennae or weapons to avoid breakage.
Troubleshooting
Most issues during model assembly can be resolved with careful attention to the instructions. Here are some common scenarios and solutions:
- Parts Not Fitting:
- Ensure you are using the correct parts for the step. Double-check the part numbers against the instruction diagrams.
- Inspect for excess plastic (flash) from the molding process. Carefully trim any flash with a hobby knife.
- If a part is too tight, gently sand the connecting surfaces. Avoid removing too much material.
- Decals Not Adhering:
- Ensure the surface is clean and dry before applying decals.
- Use a decal setting solution to help the decals conform to irregular surfaces and improve adhesion.
- Model Instability:
- Verify that all leg joints are securely clipped into place.
- Ensure the model is properly seated on its display base.
Product Specifications
| Brand | Revell |
| Model Name | Revell 01205 AT-AT Star Wars Stormtrooper Plastic Model kit |
| Item Model Number | RV01205 |
| ASIN | B07JMDY8HH |
| Scale | 1/144 |
| Number of Pieces | 161 |
| Material | Plastic |
| Item Dimensions (L x W x H) | 6.3 x 2.36 x 5.91 inches |
| Item Weight | 3.52 ounces (0.1 Kilograms) |
| Age Range | Child, Adult |
| Special Features | Pre-colored, clip-together design, included display base, detailed cockpit with seated pilots, two markings formats (stickers & waterslide decals) |
| Included Components | Parts to make one model kit |
| Manufacturer | Carrera Revell Europe GmbH |
| Date First Available | November 12, 2018 |
Warranty Information
Specific warranty details for the Revell RV01205 AT-AT Plastic Model Kit are typically provided within the product packaging or on the manufacturer's official website. Please refer to the documentation included with your purchase for comprehensive warranty terms and conditions. For any warranty claims or inquiries, contact Revell customer support directly.
Customer Support
For further assistance, technical support, or inquiries regarding your Revell RV01205 AT-AT Plastic Model Kit, please contact Revell customer service. You can typically find contact information on the product packaging or by visiting the official Revell website.
Online Resources: Visit the official Revell website for FAQs, product information, and additional support.
