1. Introduction
Thank you for purchasing the IMRELAX 6 Pack LED Par Wireless Wash Lights. This manual provides essential information for the safe and efficient operation of your new lighting system. These versatile, battery-operated LED Par Uplights feature RGBAW+UV color mixing and built-in wireless DMX 512, making them ideal for various events and installations.
2. Safety Information
- Always connect to a grounded power outlet.
- Do not expose the lights to rain or moisture.
- Ensure proper ventilation to prevent overheating.
- Avoid direct eye exposure to the light source.
- Disconnect power before cleaning or servicing.
- Only qualified personnel should perform repairs.
3. Product Overview
3.1 Key Features
- True Wireless Operation: 100% battery-operated with built-in wireless DMX 512 receiver for cable-free setup.
- RGBAW+UV LEDs: 4x18W high brightness 6-in-1 LEDs for a wide spectrum of colors including Red, Green, Blue, Amber, White, and UV.
- Multiple Control Modes: Supports DMX, IRC Remote, Wi-Fi (via Phone App), Infrared, Sound Active, Master/Slave, and Auto modes.
- Smooth Color Mixing: Capable of creating customized colors with a smooth transition.
- Durable Design: Comes with a waterproof hard case for protection and transport.
3.2 Components
The package includes six (6) LED Par Wireless Wash Lights and one (1) flight case for convenient storage and transportation.
Figure 1: Six LED Par Wireless Wash Lights and Flight Case.
Figure 2: Rear panel of the LED Par light with control buttons (MENU, DOWN, UP, ENTER) and ports (Wireless DMX Code, IRC, MIC).
Figure 3: Front view of the LED Par light, highlighting the LED display and the four light sources.
4. Setup
4.1 Unpacking
Carefully remove the lights from the flight case. Inspect each unit for any signs of damage during transit. Retain the original packaging for future storage or transport.
4.2 Charging
Before first use, fully charge each light. The recharge time is approximately 6 hours. Connect the provided power cable to the light and a suitable power outlet. The charging indicator will show the status.
4.3 Placement
Position the lights on a stable, flat surface or mount them using appropriate clamps (not included) to a truss or stand. Ensure adequate space around each unit for ventilation. For uplighting, place units at the base of walls or objects you wish to illuminate.
Figure 4: Example of IMRELAX LED Par lights used for uplighting in an event setting.
5. Operating Instructions
The IMRELAX LED Par lights offer various control methods. Use the LCD display and buttons on the rear panel (MENU, DOWN, UP, ENTER) to navigate settings, or utilize external control options.
5.1 Control Modes
- DMX512 Control: Connect a DMX controller to the light's DMX input. Set the DMX address on the light's display. The lights support 6/10 DMX channels. Refer to the DMX channel chart in Section 6 for specific functions.
- IRC Remote Control: Use the included infrared remote control to quickly change colors, modes, and brightness. Point the remote towards the IRC sensor on the light's rear panel.
- Phone App (WIFI) Control: Download the dedicated IMRELAX app on your smartphone. Connect your phone to the light's Wi-Fi network (if applicable, refer to app instructions for pairing). This allows for intuitive color selection and mode changes via a color wheel interface.
- Master/Slave Mode: Link multiple lights together using DMX cables. Set one light as the "Master" and others as "Slave." The slave units will mimic the master's settings and effects.
- Auto Mode: The light cycles through pre-programmed color changes, fades, jumps, and strobes automatically. Select this mode via the display or remote.
- Sound Active Mode: The light reacts to ambient sound, changing colors and patterns in sync with music or other audio. Ensure the microphone (MIC) on the light is unobstructed.
- Infrared Control: Similar to IRC Remote, but may refer to a broader category of infrared communication.
5.2 Demonstrations
Video 1: Demonstration of the IMRELAX LED Par light's color changing capabilities and sound activation. This video showcases the dynamic lighting effects possible with the unit.
Video 2: This video illustrates the control of the IMRELAX LED Par light via a smartphone application, demonstrating color selection and mode adjustments through the app interface.
6. Maintenance
6.1 Cleaning
Regularly clean the exterior of the lights with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use harsh chemicals or abrasive cleaners. Keep the lens free of dust and debris for optimal light output.
6.2 Storage
When not in use, store the lights in their waterproof hard case in a cool, dry place away from direct sunlight and extreme temperatures. Ensure batteries are charged periodically if stored for extended periods to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery depleted; Power cable not connected; Unit malfunction. | Charge the battery; Check power connections; Contact support. |
| No DMX control. | Incorrect DMX address; Faulty DMX cable; Controller issue. | Verify DMX address; Test/replace DMX cable; Check DMX controller settings. |
| Remote control not working. | Dead battery in remote; Obstruction to IR sensor. | Replace remote battery; Ensure clear line of sight to IR sensor. |
| Light overheats. | Poor ventilation; Blocked fan/vents. | Ensure adequate airflow around the unit; Clear any obstructions from vents. |
8. Specifications
| Attribute | Detail |
|---|---|
| Product Name | 6 Pieces Battery 4*18W RGBWA + UV LED Par Lights |
| Model Number | IM-BTPL0418 (Internal), 200 (Item Model Number) |
| Power Supply | AC110V-250V 50/60 Hz |
| Power Consumption | 80W |
| Light Source | 4pcs 18W high brightness 6 in 1 LEDs (RGBAW+UV) |
| Lamp Life | 100,000 hours |
| LED Angle | 25 degree |
| Control Channels | 6/10 CH |
| Control Modes | Phone App (WIFI)/DMX512/IRC remote/Master-Slave/Auto/Sound active/Infrared control |
| Control Board | LCD Display |
| Recharge Time | 6 hours |
| Unit Dimensions (each) | 138*145*184mm (approx. 13.8 x 14.5 x 18.4 cm) |
| Unit Net Weight (each) | 3.2kg (approx. 7.05 lbs) |
| Material Type | Metal |
9. Warranty and Support
IMRELAX provides a 2-year warranty for this product, ensuring high quality and safety. For any technical assistance, troubleshooting, or warranty claims, please contact IMRELAX professional after-sale service. You may also refer to the seller's contact information on your purchase receipt or the Amazon product page for direct support.
Manufacturer: IMRELAX
Place of Business: Foshan Daokai Lighting Technology CO. Ltd, Factory Building, 5th Floor, No. 19, Donglian Development Zone, Danzao Town, Nanhai District, Foshan, Guangdong, 528223, China
Phone: +8618566036828