BLACK+DECKER BHDC500B46

BLACK+DECKER BHDC500B46 1500W Ceramic Space Heater Instruction Manual

Model: BHDC500B46

1. Important Safety Instructions

Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

  • Electrical Safety: Always plug the heater directly into a wall outlet. Never use with an extension cord, power strip, or surge protector, as this can create a fire hazard due to overheating. Ensure the outlet is rated for 120V, 12.5 Amps.
  • Placement: Place the heater on a firm, level surface. Maintain at least 3 feet (0.9 meters) clearance from walls, furniture, curtains, bedding, and other combustible materials. Do not use in bathrooms, laundry areas, or similar damp locations.
  • Overheat Protection: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. To reset, unplug the heater, wait 10 minutes for it to cool, then plug it back in.
  • Tip-Over Protection: The heater includes a safety tip-over switch that automatically turns the unit off if it is accidentally tipped over. Ensure the heater is placed on a stable surface for continuous operation.
  • Supervision: Close supervision is necessary when the heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities. Do not leave the heater unattended.
  • Ventilation: Do not block air intakes or exhaust openings. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • Unplug When Not in Use: Always unplug the heater when not in use or when moving it.
BLACK+DECKER ceramic heater demonstrating tip-over protection, showing the heater tilting and an 'OFF' switch activating.

Image: The heater features a safety tip-over switch that automatically deactivates the unit if it is knocked over, indicated by an 'OFF' switch graphic.

2. Product Overview

The BLACK+DECKER BHDC500B46 is a compact and portable 1500W ceramic space heater designed for indoor use. It provides efficient heating for small to medium-sized rooms, offering both fan-only and two heat settings.

Key Features:

  • Compact Design: Measuring approximately 7.5" x 6.3" x 9.5", it is suitable for various indoor spaces including bedrooms, living rooms, kitchens, and offices.
  • Multiple Settings: Offers three operational modes: Fan, Low (900 Watts), and High (1500 Watts).
  • Safety Features: Equipped with overheat protection and a safety tip-over auto shutoff mechanism.
  • Portability: Lightweight (2.75 lbs.) with an integrated handle for easy relocation.
  • Adjustable Thermostat: Manual adjustable thermostat for precise temperature control.
  • Power Indicator Light: Illuminates when the unit is operating.
Front view of the BLACK+DECKER BHDC500B46 ceramic space heater, showing the heating element glowing behind a protective grille.

Image: The BLACK+DECKER BHDC500B46 ceramic space heater in operation, emitting warmth.

Top-down view of the BLACK+DECKER BHDC500B46 heater's mechanical controls, showing the thermostat dial (Min to Max) and the mode selector dial (Off, Fan, Low, High).

Image: Close-up of the heater's mechanical control dials for thermostat and mode selection.

The BLACK+DECKER BHDC500B46 ceramic heater placed on a small table next to a person sitting on a couch, illustrating its compact and portable nature.

Image: The compact and portable design of the heater, suitable for various room settings.

3. Setup

  1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage or if return is necessary.
  2. Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or flammable materials.
  3. Power Connection: Plug the heater directly into a standard 120V AC wall outlet. Do not use extension cords or power strips.

4. Operating Instructions

The BLACK+DECKER BHDC500B46 heater features two rotary dials for easy control of settings and temperature.

The BLACK+DECKER ceramic heater with graphics indicating 'Low 900 watts' and 'High 1500 watts' heat settings.

Image: Visual representation of the dual heat settings: Low (900W) and High (1500W).

Close-up of the heater's control panel with two dials: one for thermostat (Min to Max) and one for mode selection (Off, Fan, Low, High).

Image: Detailed view of the adjustable dial controls for heat and fan functions.

  1. Power On: Turn the right dial (Mode Selector) from 'OFF' to your desired setting: 'FAN' (fan only), 'LOW' (900 Watts heat), or 'HIGH' (1500 Watts heat). The power indicator light will illuminate.
  2. Adjusting Temperature: Use the left dial (Thermostat Control) to set the desired room temperature. Turn the dial towards 'MAX' for higher heat or 'MIN' for lower heat. The heater will cycle on and off to maintain the set temperature.
  3. Power Off: Turn the Mode Selector dial to 'OFF'. The power indicator light will turn off. Unplug the heater from the wall outlet when not in use.

5. Maintenance

Cleaning:

  • Always unplug the heater and allow it to cool completely before cleaning.
  • Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Do not immerse the heater in water or allow water to drip into the interior.
  • Periodically vacuum the air intake and exhaust grilles to remove dust and lint.

Storage:

  • Store the heater in a cool, dry place when not in use.
  • It is recommended to store the heater in its original packaging to protect it from dust and damage.

6. Troubleshooting

ProblemPossible CauseSolution
Heater does not turn on.No power to the unit.
Tip-over switch activated.
Overheat protection activated.
Ensure the heater is plugged into a working 120V outlet.
Ensure the heater is on a flat, stable surface.
Unplug, wait 10 minutes, then plug back in.
Heater turns off unexpectedly.Tip-over switch activated.
Overheat protection activated.
Ensure the heater is on a flat, stable surface.
Unplug, wait 10 minutes, then plug back in. Check for blocked air vents.
Heater produces a burning smell.Dust accumulation on heating elements.
Electrical issue.
Unplug the heater and allow it to cool. Clean the grilles. If the smell persists or is strong, discontinue use immediately and contact customer support.
Heater is not heating effectively.Thermostat set too low.
Room size too large for unit.
Increase the thermostat setting.
Ensure the heater is used in an appropriately sized room (up to 150 sq ft).

7. Specifications

Diagram showing the dimensions of the BLACK+DECKER BHDC500B46 ceramic heater: 9.5 inches height, 7.5 inches depth, and 6.3 inches width.

Image: Dimensions of the BLACK+DECKER BHDC500B46 ceramic space heater.

FeatureDetail
BrandBLACK+DECKER
Model NumberBHDC500B46
Power Output1500 Watts (High), 900 Watts (Low)
Voltage120 Volts
Amperage12.5 Amps
Fuel TypeElectric
Heating CoverageUp to 150 square feet
Product Dimensions (DxWxH)8.3"D x 10.9"W x 8.3"H (as per product data, note discrepancy with image)
Item Weight1.4 pounds
Special FeatureManual Controls, Overheat Protection, Tip-Over Shutoff
UPC819813016449

8. Warranty and Support

This BLACK+DECKER BHDC500B46 Ceramic Space Heater comes with a 1-year limited warranty.

For warranty claims, technical support, or customer service inquiries, please refer to the contact information provided with your product packaging or visit the official BLACK+DECKER website.

Manufacturer: W Appliance Company

© 2023 BLACK+DECKER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.