Funko POP! El Diablo #03 (Black Suit) Limited Edition Instruction Manual

Introduction

This manual provides essential information for the care and display of your Funko POP! El Diablo #03 (Black Suit) Limited Edition vinyl figure. This collectible is part of the Funko Shop 20 Years Limited Edition series, originating from the classic Spastik Plastik line. The figure stands approximately 3.75 inches tall.

This image displays the Funko POP! El Diablo #03 vinyl figure. On the left, the figure is shown inside its collector's box, highlighting the 'Limited Edition' and '20 Years Funniversary' labels. On the right, the figure is shown outside its box, revealing its full design: a red-skinned character with small horns, a black double-breasted suit, and a wide, winking smile.

Setup

1. Unboxing: Carefully remove the vinyl figure from its packaging. Retain the original box if you wish to preserve its collector's value or for future storage.
2. Placement: Select a stable, flat surface for display. Ensure the location is away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or discoloration.
3. Stability: Confirm the figure is standing securely on its base to prevent accidental falls.

Operating

The Funko POP! El Diablo #03 is a static collectible figure designed for display. It does not require batteries or electronic operation.

• Display: Position the figure on a level surface where it can be admired.
• Interaction: While durable, avoid excessive handling to maintain its pristine condition.

Maintenance

• Cleaning: To remove dust, gently wipe the figure with a soft, dry, lint-free cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the paint finish.
• Storage: If storing the figure, place it back in its original packaging or a protective container to shield it from dust and potential damage. Store in a cool, dry environment.
• Handling: Always handle the figure by its main body to avoid stressing smaller parts like horns or limbs.

Troubleshooting

• Dust Accumulation: If dust builds up in crevices, use a soft brush (like a clean, dry paintbrush) to gently dislodge it before wiping with a cloth.
• Figure Instability: Ensure the display surface is completely flat and level. If the figure has a removable base, ensure it is properly attached.
• Minor Scuffs/Marks: For very minor surface marks, a slightly damp cloth (water only) can sometimes be used, but proceed with extreme caution and test on an inconspicuous area first. Avoid rubbing vigorously.

Specifications

Warranty and Support

Funko products are manufactured to high-quality standards. For specific warranty information or support regarding manufacturing defects, please refer to the official Funko website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Official Funko Website: www.funko.com