nanoblock NBPM-043

nanoblock Pokemon Espeon Building Kit Instruction Manual

Model: NBPM-043

Brand: nanoblock

1. Introduction

This manual provides instructions for assembling and caring for your nanoblock Pokemon Espeon building kit. This kit allows you to construct a detailed miniature model of Espeon using micro-sized building blocks. Please read all instructions carefully before beginning assembly.

Assembled nanoblock Espeon model, showcasing its purple and blue block construction.
Assembled nanoblock Espeon model, showcasing its purple and blue block construction.

2. Safety Information

WARNING: CHOKING HAZARD

This product contains small parts and is considered a choking hazard. It is not suitable for children under 3 years of age. The recommended age for assembly is 15 years and up due to the intricate nature and small size of the blocks.

3. Setup: Unpacking and Preparation

Before you begin the assembly process, ensure you have a suitable workspace and all components are accounted for.

  1. Unpack Carefully: Gently open the product packaging. Avoid tearing the instruction sheet or losing any small parts.
  2. Verify Contents: Confirm that all micro-sized building blocks and the detailed instruction sheet are present. Refer to the parts list (if provided in the physical manual) to ensure completeness.
  3. Prepare Workspace: Work on a clean, flat, and well-lit surface. This helps prevent the loss of small blocks and improves visibility during assembly.
The nanoblock Pokemon Espeon kit packaging, showing the model and block count.
The nanoblock Pokemon Espeon kit packaging, showing the model and block count.

4. Assembly Instructions

The nanoblock Espeon model consists of 140 micro-sized pieces. Follow the step-by-step instructions provided in the included physical manual for precise assembly. The blocks are very small, measuring as little as 4mm x 4mm x 5mm, requiring careful handling.

General Assembly Tips:

  • Identify Pieces: Before starting each section, sort blocks by color and size. This will significantly simplify the building process and reduce errors.
  • Follow Steps Sequentially: Each step in the instruction manual builds upon the previous one. Do not skip steps, as this can lead to structural issues.
  • Use Gentle Force: Blocks should click into place with moderate pressure. Avoid excessive force, which can damage the blocks or cause them to misalign.
  • Refer to Diagrams: The instruction diagrams are crucial for correct block placement and orientation. Pay close attention to the visual cues.
  • Patience is Key: Due to the small size of nanoblocks, assembly requires patience and precision. Take breaks if needed.
A close-up view of nanoblock pieces, highlighting their small size and interlocking design.
A close-up view of nanoblock pieces, highlighting their small size and interlocking design.
An example of a nanoblock model being constructed, demonstrating the intricate layering of small blocks.
An example of a nanoblock model being constructed, demonstrating the intricate layering of small blocks.

5. Care and Maintenance

Once assembled, your nanoblock model requires minimal maintenance to preserve its appearance and structural integrity.

  • Cleaning: To remove dust, use a soft, dry brush (such as a clean makeup brush) or a can of compressed air. Avoid using water, harsh chemicals, or abrasive cleaners, as these can damage the plastic or cause discoloration.
  • Storage and Display: Display your model on a stable, flat surface away from direct sunlight, high humidity, and extreme temperatures. Prolonged exposure to sunlight can cause the plastic to fade or become brittle.
  • Handling: Handle the model gently. While nanoblocks are designed to interlock securely, excessive force or dropping the model can cause small parts to detach.

6. Troubleshooting

If you encounter any issues during assembly or with your finished model, refer to the following common problems and solutions:

IssueSolution
Missing PiecesDouble-check the packaging, instruction manual, and your work area thoroughly. Small pieces can easily be overlooked. If pieces are genuinely missing, contact nanoblock customer support with your model number (NBPM-043).
Difficulty Connecting BlocksEnsure blocks are correctly oriented and aligned according to the instruction diagrams. Apply gentle, even pressure. Sometimes rotating a block 180 degrees can help.
Model Instability or Parts DetachingReview the most recent assembly steps to ensure all blocks are securely connected and no steps were missed. Small gaps or misaligned blocks can affect overall stability. Re-press blocks firmly into place.

7. Product Specifications

  • Model Number: NBPM-043
  • Product Name: nanoblock Pokemon Espeon Building Kit
  • Number of Pieces: 140
  • Assembled Dimensions: Approximately 2.36 x 2.04 x 1.89 inches (6 x 5.2 x 4.8 cm)
  • Item Weight: 1.02 ounces (29 grams)
  • Difficulty Level: 2 out of 5 (1 being easiest, 5 most advanced)
  • Recommended Age: 15 years and up
  • Manufacturer: Kawada

8. Support and Contact Information

For further assistance, questions, or to report missing parts, please visit the official nanoblock website or contact their customer support channels.

Official nanoblock Store: nanoblock Store on Amazon

When contacting support, please ensure you have your model number (NBPM-043) and details of your issue readily available.

© 2025 nanoblock. All rights reserved. Pokemon characters are trademarks of Nintendo/Creatures Inc./GAME FREAK inc.