Warehouse of Tiffany CFL-8347RB
Warehouse of Tiffany CFL-8347RB Pristil Ceiling Fan User Manual
Model: CFL-8347RB
Introduction
Thank you for purchasing the Warehouse of Tiffany CFL-8347RB Pristil 5-Blade 52-Inch Rustic Bronze Lighted Crystal Grid Shade Ceiling Fan. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before beginning installation and keep it for future reference.
Important Safety Information
- Always disconnect power at the main circuit breaker before installation or servicing.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Ensure the installation site can support the fan's weight (approximately 19 pounds).
- Do not operate the fan with damaged blades or housing.
- Keep hands, clothing, and other objects clear of the fan blades when in operation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Before beginning installation, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the fan. Contact customer service for assistance.
- Ceiling Fan Motor Housing (Rustic Bronze finish)
- Fan Blades (5 count)
- Blade Brackets
- Downrod and Canopy Assembly
- Light Kit Assembly with Crystal Grid Shades (3 count)
- Pull Chains (for fan speed and light)
- Mounting Hardware (screws, washers, wire nuts)
- Instruction Manual
Figure 1: Front view of the Pristil 5-Blade 52-Inch Rustic Bronze Lighted Crystal Grid Shade Ceiling Fan. Shows the main motor housing, five blades, and three crystal-shaded lights.
Installation Instructions
Professional installation is recommended for this ceiling fan. Ensure you have all necessary tools before beginning. Refer to local electrical codes for specific requirements.
Step-by-Step Installation:
- Turn Off Power: Locate the circuit breaker that supplies power to the ceiling fan location and turn it off. Verify power is off using a voltage tester.
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling junction box. Ensure the junction box is securely fastened to the building structure and can support the fan's weight.
- Downrod Assembly: Insert the downrod through the canopy and coupling cover. Feed the motor wires through the downrod.
- Hang Fan Motor: Carefully lift the fan motor assembly and place the downrod ball into the mounting bracket opening.
- Electrical Connections: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate wiring guide (not included in this general manual). Typically, this involves connecting live, neutral, and ground wires. Use wire nuts to secure connections.
- Secure Canopy: Slide the canopy up to the ceiling and secure it to the mounting bracket with the provided screws.
- Blade Attachment: Attach the fan blades to the blade brackets, then secure the blade brackets to the motor housing. Ensure all screws are tightened.
- Light Kit Installation: Connect the light kit wires to the fan motor housing wires. Secure the light kit assembly to the bottom of the fan motor housing. Install the crystal grid shades onto the light fixtures.
- Bulb Installation: Install three (3) E26 60W bulbs and three (3) E12 60W bulbs (not included) into their respective sockets within the light kit.
- Pull Chain Attachment: Attach the decorative pull chains to the fan speed and light switches.
- Restore Power: Turn the power back on at the main circuit breaker.
Figure 2: Bottom view of the fan, showing the three crystal-shaded light fixtures and the pull chains for operation.
Operating Instructions
Your Pristil ceiling fan is operated by two pull chains, one for fan speed control and one for light control.
Fan Speed Control:
- Pull the fan speed chain once for high speed.
- Pull again for medium speed.
- Pull again for low speed.
- Pull a fourth time to turn the fan off.
Light Control:
- Pull the light chain once to turn the lights on.
- Pull again to turn the lights off.
Note: The fan also features a reversible motor for seasonal use. A small switch on the motor housing (often near the downrod) allows you to change the direction of airflow. Downward airflow is ideal for cooling in summer, while upward airflow helps circulate warm air in winter.
Figure 3: Top view of the fan, showing the motor housing and the attachment point for the downrod. The reverse switch is typically located on the motor housing.
Care and Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your ceiling fan.
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or crystal shades.
- Blade Cleaning: Dust the fan blades regularly to prevent dust buildup, which can cause wobbling.
- Crystal Shades: Gently wipe the crystal grid shades with a soft, lint-free cloth. For stubborn dirt, a mild glass cleaner can be used sparingly on the crystals, avoiding contact with the metal finish.
- Lubrication: The fan motor is permanently lubricated and does not require oiling.
- Tightening Screws: Periodically check all screws on the fan and light kit for tightness. Retighten as necessary.
Troubleshooting Guide
Before attempting any repairs, always disconnect power at the main circuit breaker.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start. | No power to the fan; loose wire connections; faulty pull chain switch. | Check circuit breaker and wall switch. Verify all wire connections are secure. Replace pull chain switch if faulty. |
| Fan wobbles. | Loose blade screws; unbalanced blades; loose mounting bracket. | Ensure all blade screws are tight. Check for bent blade holders. Use a balancing kit (not included) if necessary. Tighten mounting bracket screws. |
| Lights do not work. | Loose wire connections; faulty bulbs; faulty light kit switch. | Check wire connections to the light kit. Replace bulbs. Replace light kit switch if faulty. |
| Noisy operation. | Loose screws; motor hum; blades hitting an obstruction. | Tighten all screws. Ensure no wires are rubbing against the motor housing. Check for obstructions in the blade path. |
Product Specifications
| Model Name: | Pristil 5-Blade 52-Inch Rustic Bronze Lighted Ceiling Fans with Crystal Grid Shade |
| Model Number: | CFL-8347RB |
| Brand: | Warehouse of Tiffany |
| Dimensions (L x W x H): | 52 x 52 x 24 inches |
| Item Weight: | 19 pounds |
| Color: | Rustic Bronze |
| Material: | Metal, Wood, Crystal |
| Number of Blades: | 5 |
| Light Source Type: | Incandescent |
| Bulb Requirements: | 3 x E26 60W (not included), 3 x E12 60W (not included) |
| Voltage: | 110-120V 60Hz |
| Control Type: | Pull Chain |
| Assembly Required: | Yes |
| UPC: | 653341044082 |
Figure 4: Energy Guide label for the CFL-8347RB ceiling fan, showing an estimated yearly energy cost of $27 and airflow of 4067 Cubic Feet Per Minute.
Warranty Information
According to product specifications, there is no stated warranty for this product. Please refer to your retailer's return policy or contact the manufacturer directly for any warranty-related inquiries.
Customer Support
For technical assistance, missing parts, or any questions regarding your Warehouse of Tiffany ceiling fan, please contact the manufacturer or your place of purchase. Always have your model number (CFL-8347RB) and purchase date ready when contacting support.
You can visit the Warehouse of Tiffany Store on Amazon for more information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.