Sekonda 1577.27

SEKONDA Men's Classic Analog Quartz Watch Model 1577.27 Instruction Manual

1. Introduction

Thank you for choosing the SEKONDA Men's Classic Analog Quartz Watch, Model 1577.27. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

2. Product Overview

Familiarize yourself with the main components of your SEKONDA watch:

  • Watch Case: Houses the movement and protects the dial.
  • Dial: The watch face displaying the time and date.
  • Hands: Hour, minute, and second hands indicate the time.
  • Crown: Used for setting the time and date. Located on the side of the watch case.
  • Leather Strap: Secures the watch to your wrist.
  • Buckle: Fastens the leather strap.
Front view of Sekonda Men's Classic Analog Quartz Watch Model 1577.27

Image 2.1: Front view of the Sekonda Model 1577.27 watch, showing the black dial, gold-tone markers, and black leather strap. The date window is visible at the 3 o'clock position.

3. Setup and Time/Date Adjustment

To set the time and date on your watch, follow these steps:

  1. Setting the Time:
    • Pull the crown out to the second click position (farthest out).
    • Turn the crown clockwise or counter-clockwise to move the hands and set the desired time.
    • Once the time is set, push the crown back in to the normal position.
  2. Setting the Date:
    • Pull the crown out to the first click position (halfway out).
    • Turn the crown clockwise to adjust the date.
    • Once the date is set, push the crown back in to the normal position.
    • Note: Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism. If the date changes during the day, advance the time by 12 hours.
Side view of Sekonda Men's Classic Analog Quartz Watch showing the crown

Image 3.1: Side view of the Sekonda Model 1577.27 watch, highlighting the crown used for time and date adjustments.

4. Operating Your Watch

Your SEKONDA watch is designed for reliable timekeeping. Once the time and date are set, the watch will operate continuously until the battery requires replacement.

  • Water Resistance: This watch is water resistant to 50 meters (5 ATM). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is not suitable for swimming, diving, or showering.
  • Avoid Extreme Temperatures: Exposure to extreme temperatures (hot or cold) can affect the accuracy and lifespan of your watch.
  • Magnetic Fields: Keep your watch away from strong magnetic fields, as they can interfere with the quartz movement.

5. Maintenance

Proper care will help maintain the appearance and function of your SEKONDA watch.

  • Cleaning:
    • Wipe the watch case and crystal with a soft, dry cloth regularly to remove dust and smudges.
    • For the leather strap, wipe with a slightly damp cloth and allow it to air dry. Avoid excessive moisture.
  • Battery Replacement:
    • The watch uses one LR44 battery.
    • When the second hand begins to move at two-second intervals, it indicates that the battery is low and needs replacement.
    • Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.
  • Strap Care:
    • Avoid prolonged exposure of the leather strap to direct sunlight, water, and chemicals to prevent damage and discoloration.
    • If the strap becomes wet, dry it thoroughly with a soft cloth before wearing.
Back view of Sekonda Men's Classic Analog Quartz Watch with leather strap and buckle

Image 5.1: Back view of the Sekonda Model 1577.27 watch, showing the leather strap and the Sekonda-branded buckle.

6. Troubleshooting

If you encounter any issues with your watch, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Watch stops or runs intermittentlyLow batteryReplace the battery (refer to Section 5).
Incorrect timeTime not set correctly or crown is pulled outSet the time (refer to Section 3). Ensure the crown is fully pushed in.
Date changes at noon instead of midnightAM/PM setting incorrectAdvance the time by 12 hours (refer to Section 3).
Condensation inside the watchExposure to extreme temperature changes or moisture ingressConsult a qualified watch technician immediately.

If the problem persists after attempting these solutions, please contact Sekonda customer support or a certified watch repair center.

7. Specifications

FeatureDetail
Model Number1577.27
MovementQuartz Analog
Battery Type1 x LR44 (included)
Water Resistance50 meters (5 ATM)
Packaging Dimensions10.4 x 6.8 x 6.2 cm
Packaging Weight46 grams
Strap MaterialLeather

8. Warranty and Support

Your SEKONDA watch is manufactured to high standards and comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.

For technical support, service, or warranty claims, please contact Sekonda customer service through their official website or the retailer where the watch was purchased. Keep your proof of purchase for warranty validation.

For more information, visit the official Sekonda website: www.sekonda.co.uk

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.