Living District Axel 6-Light Polished Nickel Pendant Instruction Manual

Product Overview

The Living District Axel 6-Light Polished Nickel Pendant is a decorative lighting fixture designed for indoor use. It features three adjustable crossing arms mounted on a central rod, providing six light sources. The fixture is constructed from steel with a polished nickel finish. This manual provides essential information for the safe installation, operation, and maintenance of your pendant light.

Image: The Axel 6-Light Polished Nickel Pendant light fixture shown installed in a modern living room setting, illuminating the space.

Safety Information

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. Installation should be performed by a qualified electrician or a person with sufficient electrical knowledge.

• WARNING: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
• Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
• Do not exceed the maximum wattage specified for the bulbs.
• This fixture is designed for indoor use only.
• Handle glass components (if any) with care to prevent breakage.

What's in the Box

Carefully unpack the contents and ensure all items are present and undamaged.

• Pendant Light Fixture (Preassembled steel frame)
• Mounting Canopy
• Hanging Chain (60 inches length)
• Electrical Wire (72 inches length, clear)
• Installation Hardware (screws, wire nuts, etc.)

Note: E26 bulbs are required and are not included with this product.

Image: An isolated view of the Axel 6-Light Polished Nickel Pendant, showcasing its six arms and central rod structure.

Setup and Installation

This fixture is designed for semi-flush mount installation. While the steel frame is preassembled, proper electrical connection and secure mounting are crucial.

1. Turn off Power: Before starting, ensure the power to the installation area is completely turned off at the circuit breaker.
2. Prepare Mounting: Attach the mounting bracket to the junction box in the ceiling. The canopy dimensions are 4.7"L x 4.7"W x 1"H.
3. Adjust Hanging Height: The pendant uses a chain for hanging. Adjust the chain length to achieve the desired hanging height, which can range from a minimum of 28 inches to a maximum of 82 inches from the canopy. The chain length provided is 60 inches.
4. Electrical Connections: Connect the fixture's electrical wires to the corresponding wires from the junction box (typically black to black, white to white, and ground to ground). Secure connections with wire nuts. The fixture includes 72 inches of clear wire.
5. Secure Canopy: Carefully push the canopy up to the ceiling, covering the junction box and wiring, and secure it to the mounting bracket.
6. Install Bulbs: Once the fixture is securely mounted and wired, install six E26 base bulbs (not included) into the sockets.
7. Restore Power: Turn the power back on at the circuit breaker.

Image: A detailed view of the pendant's adjustable arms and their connection points, highlighting the polished nickel finish.

Operating Instructions

The Axel pendant light is designed for straightforward operation once installed.

• Bulb Requirements: This fixture requires six E26 base bulbs. Compatible bulb types include incandescent or LED. Each bulb can be up to 60W, with a total maximum wattage of 360W for the fixture.
• Dimmable Functionality: The fixture is dimmable. To utilize this feature, ensure you use dimmable E26 bulbs and connect the fixture to a compatible dimmer switch (sold separately).
• Adjustable Light Direction: The three crossing arms are adjustable, allowing you to direct light in various directions to suit your lighting needs.
• Power Source: The fixture operates on a standard 110V-125V corded electric power source.

Image: A close-up of one of the E26 bulb sockets, showing an installed Edison-style bulb, illustrating the bulb type.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your pendant light.

• Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry cloth to wipe down the polished nickel finish. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with E26 base bulbs of the correct wattage (up to 60W per bulb).
• Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

Troubleshooting

If you experience issues with your pendant light, refer to the following common troubleshooting steps:

• Light does not turn on:
  • Check that the power is on at the circuit breaker.
  • Ensure bulbs are correctly installed and not burnt out.
  • Verify all wire connections are secure.
• Flickering lights:
  • Ensure bulbs are fully screwed into the sockets.
  • If using LED bulbs with a dimmer, confirm both are dimmable and compatible.
  • Check for loose wire connections.
• Fixture is loose:
  • Turn off power and tighten all mounting hardware.

If problems persist, consult a qualified electrician.

Specifications

Warranty

This Living District product comes with a Limited Warranty. Please refer to the warranty documentation provided at the time of purchase or contact Living District customer support for specific terms and conditions regarding coverage and duration.

Support

For further assistance, technical support, or replacement parts, please contact Living District customer service. Have your model number (LD8007D29PN) and purchase information ready when contacting support.

Please visit the official Living District website for contact information and additional resources.