Amazon Basics Portable Oil Radiator Heater User Manual

Product Overview

The Amazon Basics Portable Oil Radiator Heater is designed to provide efficient and quiet supplemental heating for indoor spaces. Its oil-filled fins offer consistent, long-lasting warmth, making it ideal for bedrooms, living rooms, and offices.

• Powerful & Adjustable Heating: Three heat settings (1500W, 1000W, 600W) for customized comfort.
• Long-Lasting Radiator Heating: Seven oil-filled fins retain heat efficiently, warming up to 144 sq ft.
• Quiet Operation: Fan-less design ensures a peaceful environment.
• ETL Certified Safety Features: Includes tip-over and overheat protection for safe use.
• Portable & Easy-To-Move: Equipped with smooth-gliding caster wheels and a convenient handle.
• Space-Saving Design: Slim profile fits easily into various room layouts.

Front view of the Amazon Basics Portable Oil Radiator Heater.

Important Safety Information

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Always place the heater on a firm, level surface.
• Do not cover the heater or block air vents.
• Keep combustible materials (furniture, pillows, bedding, papers, clothes, and curtains) at least 3 feet (0.9 m) from the front of the heater and away from the sides and rear.
• Do not use in bathrooms, laundry areas, or similar indoor locations where water may be present.
• Unplug the heater when not in use.
• Supervise children and pets when the heater is in operation.

Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for off-season storage.
2. Attaching Caster Wheels: The heater comes with snap-in caster wheels for portability. Turn the heater upside down. Align the caster wheel assemblies with the holes on the base and firmly press them into place until they click securely. Ensure all four wheels are properly attached and the heater is stable before use.
3. Placement: Position the heater on a stable, flat surface, away from walls, furniture, and any flammable materials. Ensure there is adequate clearance around the unit for proper air circulation.

Diagram illustrating the heater's features including heat settings, casters, and cord storage.

Operating Instructions

1. Power On: Plug the heater into a standard 120V AC electrical outlet. The power indicator light will illuminate.
2. Select Heat Setting: Use the heat setting dial to choose your desired warmth level:
   • Low (I): 600W
   • Medium (II): 1000W
   • High (III): 1500W
3. Adjust Thermostat: Turn the thermostat dial to your preferred temperature. The heater will cycle on and off to maintain the set temperature. For continuous heating, turn the thermostat to the 'MAX' setting.
4. Power Off: To turn off the heater, rotate the heat setting dial to '0' and unplug the unit from the wall outlet.

A person adjusting the thermostat dial on the heater's control panel.

Maintenance

• Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or immerse the heater in water.
• Storage: When not in use, store the heater in a cool, dry place. Wrap the power cord neatly around the cord storage area to prevent damage.

Troubleshooting

If your heater is not functioning as expected, refer to the following common issues:

• Heater does not turn on: Ensure the power cord is securely plugged into a working outlet. Check if the heat setting and thermostat dials are set correctly.
• Heater turns off unexpectedly: The built-in safety features (tip-over switch, overheat protection) may have activated. Ensure the heater is on a stable surface and not covered. Allow it to cool down before restarting.
• Insufficient heat output: Verify the heat setting is on 'High' and the thermostat is set to 'MAX' or a higher temperature. Ensure the room size is within the recommended heating coverage (up to 144 sq ft).

For more detailed troubleshooting or persistent issues, please refer to the complete User Manual PDF or contact customer support.

Specifications

Visual representation of the heater's dimensions and weight.

Warranty and Support

For detailed warranty information, please refer to the official Warranty PDF document. For further assistance, troubleshooting, or product inquiries, please consult the comprehensive User Manual PDF or contact Amazon Basics customer support.

• User Manual (PDF): Download Here
• Warranty (PDF): Download Here