1. Introduction
Thank you for choosing the Aquarian Phoenix 15-foot Steel-Frame Above-Ground Pool Kit. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new pool. Please read all instructions carefully before beginning installation and retain this manual for future reference.
This kit includes a durable steel-frame pool, a sand filter and pump system, a pool liner, a thru-wall skimmer, and a pool ladder, designed to provide a complete swimming experience.
2. Safety Information
WARNING: Failure to follow these safety instructions can result in serious injury or death.
- Adult supervision is required at all times when children are in or near the pool.
- Never dive or jump into an above-ground pool. The water depth is not sufficient for safe diving.
- Ensure the pool area is clear of obstacles and hazards.
- Always use the provided ladder or a secure alternative for entry and exit. Ensure the ladder is stable before use.
- Keep all electrical equipment, including the pump, away from the pool edge and ensure they are properly grounded.
- Regularly check and maintain water chemistry to prevent waterborne illnesses. Only use approved pool chemicals; do not use bleach.
- Review local HOA rules and restrictions regarding above-ground pools before installation.
3. Package Contents
Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- Steel-Frame Pool Structure (Galvanized Walls, Steel Components)
- 15-foot Pool Liner
- Sand Filter Pump (1,200 gallons per hour capacity)
- Thru-Wall Skimmer
- Pool Ladder
- Accompanying Hardware for Assembly
Figure 3.1: Key components of the Aquarian Phoenix Pool Kit.
4. Setup Instructions
Setting up your Aquarian Phoenix pool requires careful planning and execution. It is recommended to have at least four healthy adults for assembly due to the size and weight of components.
4.1 Site Preparation
- Choose a Level Location: Select a firm, level area free from sharp objects, roots, or debris. The ground must be perfectly level to ensure the structural integrity of the pool.
- Clear the Area: Remove all vegetation, rocks, and other potential hazards from the chosen site.
- Ensure Drainage: The site should allow for proper drainage away from the pool and surrounding structures.
- Proximity to Utilities: Ensure the site is within reach of an electrical outlet for the pump and a water source for filling.
4.2 Pool Assembly
- Lay Out Components: Unpack all parts and lay them out according to the detailed diagrams in the separate assembly guide.
- Assemble Bottom Track: Carefully assemble the bottom track system on the prepared level ground.
- Install Pool Wall: Erect the galvanized steel pool wall into the bottom track. This step often requires multiple people to hold the wall in place.
- Install Liner: Once the wall is secure, carefully install the pool liner, ensuring it is centered and free of wrinkles.
- Fill with Water: Begin filling the pool with water, smoothing out any remaining wrinkles in the liner as it fills.
- Install Top Rails and Caps: As the pool fills, install the 6-inch steel top rails and high-impact top caps.
Figure 4.1: Assembled Aquarian Phoenix 15-foot pool.
4.3 Ladder Installation
Assemble the pool ladder according to its specific instructions. Ensure it is securely attached to the pool and stable before use. Consider additional steps or a deck for enhanced stability and ease of access, especially for younger children or individuals with mobility concerns.
5. Operating Instructions
5.1 Sand Filter and Pump System
The included sand filter pump has a 1,200 gallons per hour capacity and features a 4-position multi-port valve for various operations.
Figure 5.1: Sand Filter Pump with Multi-Port Valve.
- Connect Hoses: Connect the pump to the skimmer and return jet using the provided hoses. Ensure all connections are tight to prevent leaks.
- Add Filter Sand: Fill the filter tank with the appropriate amount and type of filter sand (sold separately) as specified in the pump's dedicated manual.
- Prime the Pump: Follow the pump manufacturer's instructions to prime the pump before starting it for the first time.
- Select Operation Mode: Use the multi-port valve to select the desired operation mode (e.g., Filter, Backwash, Rinse, Waste, Recirculate, Closed). Refer to the pump manual for detailed descriptions of each setting.
- Start the Pump: Plug in the pump and ensure it is running smoothly. Check for any unusual noises or leaks.
5.2 Skimmer Operation
The thru-wall skimmer helps remove debris from the water surface. Regularly empty the skimmer basket to maintain efficient filtration.
6. Maintenance
6.1 Water Chemistry
- Test pool water regularly (daily or every other day) for pH, chlorine, alkalinity, and calcium hardness.
- Adjust chemical levels as needed using appropriate pool chemicals to maintain a balanced and sanitary swimming environment.
- Consult a pool supply professional for guidance on proper chemical usage and dosage.
6.2 Filter Maintenance
- Backwash: When the pressure gauge on your sand filter indicates a high reading (typically 8-10 PSI above the clean operating pressure), it's time to backwash. Follow the pump manual's instructions for backwashing.
- Rinse: After backwashing, always perform a rinse cycle to clear any remaining debris from the filter.
- Sand Replacement: Filter sand typically needs to be replaced every 3-5 years, depending on usage and maintenance.
6.3 General Cleaning
- Skim the water surface daily to remove leaves and other floating debris.
- Brush the pool walls and floor weekly to prevent algae growth and remove stubborn dirt.
- Vacuum the pool floor as needed to remove settled debris.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cloudy Water | Improper chemical balance, dirty filter, insufficient filtration time. | Test and adjust water chemistry. Backwash/rinse filter. Run pump for longer periods. |
| Pump Not Priming | Air leak in suction line, low water level, clogged skimmer basket. | Check all connections for leaks. Ensure water level is above skimmer. Clean skimmer basket. |
| Poor Water Circulation | Clogged filter, pump impeller obstruction, closed valves. | Backwash/rinse filter. Inspect pump impeller for debris. Ensure all valves are open. |
| Ladder Instability | Improper assembly, loose connections, uneven ground. | Re-check assembly instructions. Tighten all bolts. Ensure ladder base is on level, firm ground. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Aquarian |
| Model | Phoenix 15-foot |
| Shape | Round |
| Product Dimensions (L x W x H) | 180"L x 180"W x 52"H (15-foot Diameter x 52-inch Height) |
| Water Capacity (at 90% full) | Up to 5,310 Gallons |
| Material Type | Alloy Steel, Resin (Galvanized Steel Walls) |
| Filter Pump Capacity | 1,200 Gallons Per Hour |
| Included Components | Pool Frame, Liner, Sand Filter Pump, Ladder, Skimmer |
| UPC | 842372187008 |
| ASIN | B07HCJNVFV |
Figure 8.1: Aquarian Phoenix Pool Dimensions and Capacity.
9. Warranty and Support
The Aquarian Phoenix Steel-Frame Above-Ground Pool Kit comes with a 20-year limited frame warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official Aquarian Pools brand store.
For additional support and product information, visit the Aquarian Pools Store on Amazon.
