1. Product Overview
The Lindby Heiko wall lamp is designed to provide both upward and downward illumination, creating a pleasant and inviting atmosphere in any room. Crafted from plaster, this fixture offers the unique advantage of being paintable, allowing for customization to match your interior decor. It is suitable for various indoor spaces such as living rooms, dining rooms, bedrooms, and hallways.
Key Features:
- Up/Down light emission for ambient lighting.
- Paintable plaster material for personalized design.
- Modern and minimalist aesthetic.
- Designed for G9 base bulbs (bulb not included).
Image 1.1: The Lindby Heiko wall lamp in operation, showcasing its dual light emission.
2. Setup and Installation
Important Safety Information: Installation should only be performed by a qualified electrician or a person with appropriate electrical knowledge. Always ensure the main power supply is switched off before commencing any installation work to prevent electric shock.
2.1 Package Contents
Before installation, verify that all components are present:
- Lindby Heiko Wall Lamp fixture
- Mounting bracket
- Screws and wall plugs (may vary)
- Note: G9 bulb is NOT included and must be purchased separately.
Image 2.1: Components of the Lindby Heiko wall lamp, including the plaster body and mounting bracket.
2.2 Installation Steps
- Prepare the Installation Area: Choose a suitable location on the wall. Ensure there are no hidden electrical wires or pipes. Turn off the main power supply at the circuit breaker.
- Mount the Bracket: Detach the mounting bracket from the lamp fixture. Hold the bracket against the wall at the desired installation height and mark the drilling points. Drill holes, insert wall plugs, and secure the mounting bracket to the wall using screws.
- Electrical Connection: Connect the household electrical wires to the terminals on the mounting bracket. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Secure all connections tightly.
- Install the Bulb: Carefully insert a G9 base LED bulb (max 5W) into the lamp holder.
- Attach the Fixture: Align the lamp fixture with the mounting bracket and secure it in place. Ensure it is firmly attached and flush against the wall.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Video 2.1: Demonstration of a similar wall lamp installation process, showing electrical connections and mounting. This video is provided by the seller and is relevant for understanding the setup.
3. Operating Instructions
The Lindby Heiko wall lamp operates via your standard wall switch. There are no integrated controls on the fixture itself.
- Turning On/Off: Use the wall switch connected to the lamp's circuit to turn the light on or off.
- Dimming Functionality: If a dimmable G9 LED bulb is used and the lamp is connected to a compatible dimmer switch, the light intensity can be adjusted via the dimmer. The lamp itself does not have an integrated dimmer.
4. Maintenance
4.1 Cleaning
To maintain the appearance of your Lindby Heiko wall lamp:
- Ensure the power is off before cleaning.
- Wipe the plaster surface with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plaster finish.
- If the lamp has been painted, follow the cleaning instructions for the specific paint used.
4.2 Bulb Replacement
To replace the G9 bulb:
- Turn off the power supply to the lamp at the circuit breaker.
- Allow the old bulb to cool down completely if it was recently in use.
- Carefully pull out the old G9 bulb from its socket.
- Insert the new G9 LED bulb (max 5W) by pushing its pins into the socket until it is secure.
- Restore power to test the new bulb.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power supply. | Check the circuit breaker and wall switch. |
| Faulty bulb. | Replace the G9 bulb. | |
| Loose electrical connection. | (Caution: Turn off power first) Check wiring connections at the terminal block. | |
| Light flickers. | Incompatible dimmer switch or bulb. | Ensure both bulb and dimmer are compatible with each other and with LED technology. |
| Loose bulb. | Ensure the G9 bulb is fully inserted into the socket. | |
| Lamp surface is discolored. | Exposure to moisture or harsh cleaning agents. | Clean only with a dry or slightly damp cloth. The plaster can be repainted if desired. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Lindby |
| Model Name | Heiko |
| Model Number | 9621352 |
| Material | Plaster/Clay |
| Color | White (Paintable) |
| Dimensions (L x W x H) | 8.5L x 20W x 12H centimeters |
| Installation Depth | 8.5 cm |
| Light Fixture Form | Wall |
| Room Type | Dining Room, Living Room, Bedroom, Hallway |
| Specific Uses | Indoor |
| Power Source | Corded Electric (Mains Powered) |
| Voltage | 230V |
| Light Source Type | LED (Bulb not included) |
| Number of Light Sources | 1 |
| Bulb Base | G9 |
| Max Wattage | 5W (for LED) |
| Light Color | Warm White (dependent on bulb) |
| Luminous Flux | 250 Lumens (dependent on bulb) |
| Energy Efficiency | A+ (dependent on bulb) |
| Protection Class | IP20 (Not water-resistant) |
| Control Method | Wall Switch (Touch control mentioned in specs refers to general lamp features, not specific to this model's operation) |
| Switch Type | Dimmer (if compatible bulb and external dimmer switch are used) |
| Mounting Type | Wall Mounting, Semi-flush mounting |
| Assembly Required | No (refers to the fixture itself, installation is required) |
Image 6.1: Dimensions of the Lindby Heiko wall lamp.
7. Warranty Information
Specific warranty details for the Lindby Heiko wall lamp are not provided in this manual. Please refer to your purchase documentation, retailer's website, or contact Lindby customer service for information regarding warranty coverage and terms.
8. Customer Support
For technical assistance, questions about installation, or product inquiries, please contact the retailer from whom you purchased the Lindby Heiko wall lamp. You may also visit the official Lindby website for further support resources.
Contact Information:
- Refer to your purchase invoice or retailer's contact page.
- Visit the Lindby official website (if available).