Supersonic IQ-6112DJBT-BK

Supersonic Party Speakers User Manual

Model: IQ-6112DJBT-BK

Introduction

This manual provides essential information for the safe and efficient operation of your Supersonic IQ-6112DJBT-BK Party Speaker. This portable Bluetooth DJ speaker is designed to deliver robust audio performance with exceptional range, making it suitable for various environments including night clubs, home entertainment, seminars, and other events.

Please read this manual thoroughly before using the product and retain it for future reference.

Package Contents

Verify that all items listed below are included in your package:

  • 12-Inch Light-Up Portable Bluetooth DJ Speaker with Disco Light
  • Power Cable
  • User Manual

Setup

Unpacking and Placement

Carefully remove the speaker from its packaging. Place the speaker on a stable, flat surface. Ensure there is adequate ventilation around the unit.

Supersonic IQ-6112DJBT-BK Party Speaker with disco light and retractable handle

Image: Front view of the Supersonic IQ-6112DJBT-BK Party Speaker. It features a large main speaker grille with a multi-color light effect, a smaller horn-shaped speaker above it, and a blue disco ball light on top. A retractable handle is visible at the very top, indicating portability.

Power Connection

Connect the provided power cable to the speaker's power input port and then plug the other end into a standard electrical outlet. This speaker operates on corded electric power.

Portability

The speaker is equipped with a retractable handle and wheels for easy transport. Extend the handle and tilt the speaker to roll it to your desired location.

Operating Instructions

Powering On/Off

Locate the power button, typically on the rear or control panel of the speaker. Press and hold the button to turn the speaker on or off.

Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth mode. The speaker may automatically enter pairing mode or have a dedicated Bluetooth button.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "IQ-6112DJBT-BK" or similar from the list of found devices.
  4. Once connected, the speaker will indicate successful pairing, and you can begin playing audio wirelessly.

USB/MicroSD Playback

Insert a USB flash drive or microSD card containing audio files into the respective port on the speaker's control panel. The speaker will automatically detect the media and begin playback. Use the control buttons (Play/Pause, Next/Previous) to navigate your music.

AUX Input

Connect an external audio device (e.g., MP3 player, laptop) to the speaker's AUX input using a 3.5mm audio cable. Switch the speaker to AUX mode if necessary.

FM Radio

Switch the speaker to FM radio mode. Use the control buttons to scan for available stations or manually tune to a specific frequency.

Volume and Light Control

Adjust the master volume using the dedicated volume knob or buttons on the control panel. The speaker features a disco light; refer to the control panel for buttons to activate or change light modes.

Maintenance

Cleaning

Wipe the speaker's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish. Ensure no liquids enter the speaker's openings.

Storage

When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power cable before storage.

Troubleshooting

ProblemPossible CauseSolution
No PowerPower cable not connected; Power outlet not active.Ensure power cable is securely connected to both speaker and active outlet.
No SoundVolume too low; Incorrect input mode; Device not connected.Increase volume; Select correct input mode (Bluetooth, AUX, USB); Re-pair Bluetooth device or check cable connection.
Bluetooth DisconnectionDevice out of range; Interference.Move device closer to speaker; Avoid obstacles; Re-pair device.
USB/MicroSD Not PlayingUnsupported file format; Corrupted media; Incorrect mode.Ensure files are in supported format (e.g., MP3); Try different media; Select USB/MicroSD mode.

Specifications

FeatureDetail
Model NameIQ-6112DJBT-BK
Speaker TypeWoofer
Special FeaturePortable
Connectivity TechnologyAuxiliary, Bluetooth, USB
Woofer Diameter12 Inches
Power SourceCorded Electric
Item Weight1 pounds (approx. 454 Grams)
Product Dimensions22.44 x 12.59 x 10.62 inches
ManufacturerSUPERSONIC INC.
Battery Type1 Lithium Ion battery (included)
Speaker Maximum Output Power250 Watts
Audio Output ModeStereo
Controller TypeButton
ColorBlack

Warranty Information

This Supersonic product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or contact Supersonic customer support.

Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Supersonic customer support. Contact information can typically be found on the manufacturer's official website or on the product packaging.

Manufacturer: SUPERSONIC INC.

© 2023 Supersonic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.