Hi Quality Audio Bass Jaxx Duo
Bass Jaxx Duo Portable Speaker + Smartphone and Tablet Holder
Model: Bass Jaxx Duo
Brand: Hi Quality Audio
1. Introduction
Thank you for purchasing the Bass Jaxx Duo Portable Speaker. This device is designed to provide high-quality audio playback for your smartphone, tablet, or other audio devices, while also serving as a convenient holder. Its portable design and battery power make it ideal for on-the-go use.
2. Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble or attempt to repair the speaker yourself. This will void the warranty.
- Keep the speaker away from water and other liquids. Although it is listed as waterproof, prolonged submersion or exposure to strong jets of water is not recommended.
- Use only the specified battery type (AAA) and ensure correct polarity during installation.
- Dispose of batteries properly according to local regulations.
3. Package Contents
Please check the box for the following items:
- Bass Jaxx Duo Portable Speaker
- 3.5mm Aux-In Cable
- Instruction Manual (this document)
4. Product Overview
Figure 4.1: Front View
This image displays the front of the Bass Jaxx Duo speaker, featuring the white metal grill covering the speaker drivers and a central white circular control button.
Figure 4.2: Side View with Device Holder
This image shows the side profile of the speaker, clearly illustrating the integrated slot designed to hold a smartphone or tablet securely.
Figure 4.3: Rear View with Ports and Stand
This image provides a view of the back of the speaker, detailing the 3.5mm Aux-in port, the power switch (AUX/OFF/ON), and the foldable kickstand for stable positioning.
5. Setup
5.1. Battery Installation
- Locate the battery compartment on the underside or rear of the speaker.
- Open the battery compartment cover.
- Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated.
- Close the battery compartment cover securely.
5.2. Connecting to an Audio Device
- Ensure the speaker has fresh batteries installed.
- Locate the 3.5mm Aux-In port on the rear of the speaker (refer to Figure 4.3).
- Connect one end of the provided 3.5mm Aux-In cable to the speaker's Aux-In port.
- Connect the other end of the 3.5mm Aux-In cable to the headphone jack or audio output port of your smartphone, tablet, MP3 player, or computer.
6. Operating Instructions
6.1. Powering On/Off
- To power on the speaker, slide the power switch on the rear of the speaker from "OFF" to "ON" or "AUX".
- To power off the speaker, slide the power switch to "OFF".
6.2. Audio Playback
- Once connected via the 3.5mm Aux-In cable and powered on, audio from your connected device will play through the speaker.
- Control the volume directly from your connected audio device (smartphone, tablet, etc.). The speaker does not have independent volume controls.
6.3. Using the Device Holder
- The integrated slot on top of the speaker is designed to hold most smartphones and tablets in either portrait or landscape orientation.
- Gently place your device into the slot for convenient viewing while listening to audio.
7. Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the speaker. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place. Remove batteries if storing for more than a few weeks to prevent leakage.
- Battery Care: Replace batteries when audio quality degrades or the speaker fails to power on. Do not mix old and new batteries, or different types of batteries.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speaker. | Speaker is off. Low or dead batteries. Aux cable not connected properly. Volume on connected device is too low or muted. | Slide power switch to "ON" or "AUX". Replace batteries. Ensure Aux cable is fully inserted into both the speaker and the audio device. Increase volume on your audio device and check for mute settings. |
| Distorted sound. | Volume on connected device is too high. Low batteries. | Reduce volume on your audio device. Replace batteries. |
| Speaker not powering on. | No batteries or dead batteries. Incorrect battery polarity. | Install fresh AAA batteries. Check battery orientation (+/-). |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Bass Jaxx Duo |
| Speaker Type | Duo |
| Driver Diameter | 40mm |
| Output Power | 3 Watts |
| Impedance | 4 Ohms |
| Power Supply | 3 x AAA Batteries |
| Connectivity Technology | Auxiliary (3.5mm) |
| Color | White/Black |
| Item Weight | 12.5 ounces (approx. 354 grams) |
| Dimensions (Package) | 10 x 4 x 2 inches |
| Included Components | 3.5mm Aux-In Cable, Instruction Manual |
| Compatible Devices | MP3 Player, Desktop, Tablet, Smartphone |
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the packaging or contact the retailer where the product was purchased.
For technical support or inquiries, please contact Hi Quality Audio customer service through their official website or the contact information provided with your purchase receipt.
Please retain your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.