Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TIC BA16 50W Indoor/Outdoor Horn PA Speaker. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
The TIC BA16 is a heavy-duty PA horn speaker designed for both indoor and outdoor applications, featuring a 50-watt power output and compatibility with 70V/100V audio systems.
Safety Information
Always observe the following safety precautions:
- Ensure all power is disconnected before installation or maintenance.
- Do not expose the speaker to extreme temperatures or direct water spray beyond its intended outdoor rating.
- Use appropriate tools and safety gear during installation.
- Consult a qualified technician if you are unsure about any installation or wiring procedures.
- Do not attempt to modify or repair the speaker yourself.
Package Contents
Verify that all items are present in the package:
- 1x TIC BA16 50W Horn PA Speaker
- 1x Mounting Bracket
Setup and Installation
The TIC BA16 speaker is designed for easy installation with the included mounting bracket.
1. Mounting the Speaker
The speaker comes with a robust mounting bracket for secure attachment to various surfaces. Choose a location that provides optimal sound dispersion and is structurally sound enough to support the speaker's weight (approximately 7.97 pounds).
Figure 1: Front view of the TIC BA16 Horn PA Speaker, showcasing its robust design and integrated mounting bracket. This image provides an overview of the product's appearance.
Figure 2: Side profile of the TIC BA16 Horn PA Speaker, illustrating the adjustable mounting bracket. This view helps in understanding how the speaker can be angled for optimal sound projection.
- Positioning: Determine the optimal location for the speaker, considering sound coverage and environmental factors.
- Secure Mounting: Use appropriate hardware (not included) to securely attach the mounting bracket to the chosen surface. Ensure the bracket is firmly fixed before attaching the speaker.
- Speaker Attachment: Fasten the speaker to the mounting bracket using the provided bolts and nuts. Adjust the angle of the speaker as needed for desired sound direction.
2. Wiring the Speaker (70V/100V System)
The BA16 speaker is designed for use with 70V or 100V constant voltage audio systems. It features a built-in transformer with multiple power tap settings.
Figure 3: Detailed view of the rear of the TIC BA16 speaker, highlighting the rotary switch for selecting 70V/100V power tap settings or 8-ohm direct input. This is crucial for proper system integration.
- Power Tap Selection: Before connecting, use the rotary switch on the rear of the speaker to select the desired power tap setting. Available settings for 70V are 10W, 20W, 30W, 40W, and 50W. For 100V systems, settings include 20W, 40W, 60W, 80W, and 100W. An 8-ohm direct input is also available for standard low-impedance amplifiers.
- Wiring Connection: Connect the speaker wires from your amplifier to the corresponding terminals on the speaker. Ensure correct polarity (positive to positive, negative to negative).
- Secure Connections: Double-check all connections to ensure they are secure and free from short circuits.
Operating Instructions
Once the speaker is securely mounted and wired, follow these steps for operation:
- Power On: Turn on your amplifier or PA system.
- Volume Adjustment: Gradually increase the volume on your amplifier to the desired listening level.
- Sound Check: Play audio through the system to verify proper operation and sound quality.
- Power Tap Adjustment (if needed): If the sound is too loud or too quiet relative to other speakers in the system, you may need to adjust the power tap setting on the speaker (refer to "Wiring the Speaker" section). Always power off the amplifier before adjusting the power tap.
Maintenance
To ensure the longevity and optimal performance of your TIC BA16 speaker, follow these maintenance guidelines:
- Cleaning: Regularly wipe the speaker's exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all mounting hardware and wiring connections for tightness and signs of wear or corrosion.
- Environmental Protection: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., direct heavy rain, snow, or intense sunlight) may reduce its lifespan. Consider protective covers if the speaker is in a highly exposed location.
Troubleshooting
If you encounter issues with your TIC BA16 speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound | No power to amplifier; incorrect wiring; amplifier fault; incorrect power tap setting. | Check amplifier power and connections. Verify speaker wiring polarity. Ensure correct power tap setting is selected. Test with another amplifier if possible. |
| Distorted Sound | Overdriven amplifier; incorrect power tap setting; damaged speaker. | Reduce amplifier volume. Adjust power tap setting to match system requirements. If distortion persists, the speaker may be damaged and require professional inspection. |
| Low Volume | Low amplifier volume; incorrect power tap setting. | Increase amplifier volume. Select a higher power tap setting on the speaker (e.g., 50W instead of 10W for 70V systems). |
Specifications
Detailed technical specifications for the TIC BA16 50W Horn PA Speaker:
Figure 4: Technical drawing providing precise dimensions (length, width, height) of the TIC BA16 Horn PA Speaker. This information is essential for planning installation space.
| Feature | Specification |
|---|---|
| Model Name | BA16 |
| Speaker Type | Outdoor PA Horn Speaker |
| Special Feature | 70V/100V Transformer with Multiple Taps |
| Recommended Uses | Indoor, Outdoor Public Address Systems |
| Speaker Maximum Output Power | 50 Watts RMS |
| Frequency Response | 380Hz - 6.5kHz |
| SPL (@ 1W/1m) | 109dB |
| Impedance | 8 Ohm (direct), 70V/100V (tapped) |
| 70V Power Taps | 10W, 20W, 30W, 40W, 50W |
| 100V Power Taps | 20W, 40W, 60W, 80W, 100W |
| Housing Material | Aluminum |
| Product Dimensions (D x W x H) | 13.5" x 13" x 13" |
| Item Weight | 7.97 pounds |
| Included Components | Mounting Bracket |
| Warranty Type | Limited |
Warranty and Support
The TIC BA16 speaker comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official TIC website.
For technical support, troubleshooting assistance, or warranty claims, please contact TIC customer service. You can find more information and contact details on the TIC Brand Store on Amazon.