1. Introduction
Thank you for choosing the Kuvings Whole Slow Elite C7000P Juicer. This appliance is designed for home use to efficiently extract juice from various fruits and vegetables, including wheatgrass, using a low-speed mastication process. This method helps to protect and maintain healthy enzymes, minimize oxidation, and allows the juice to be stored for up to 72 hours without significant degradation.
The C7000P features a 3-inch wide feeding chute, reducing preparation time by accommodating whole fruits and larger pieces of produce. It is equipped with a heavy-duty motor and patented low-speed extraction technology. The juicer includes BPA-free components, a hopper, a pulp strainer, and a blank strainer for versatile food processing. Special cleaning tools are also provided for convenient maintenance. The chrome-plated, drip-free juice spout ensures a clean juicing experience.

Figure 1: General view of the Kuvings Whole Slow Elite C7000P Juicer. This image illustrates the overall design and appearance of the product.
Note: No official product videos were available in the provided data for embedding in this manual.
2. Important Safety Instructions
To ensure safe operation and prevent injury or damage, please read all instructions thoroughly before using your Kuvings Whole Slow Elite C7000P Juicer. Keep this manual for future reference.
- Always ensure the juicer is properly assembled and all parts are securely locked into place before plugging it in or operating.
- Keep hands and utensils away from moving parts during operation to prevent injury. Always use the provided pusher to guide ingredients if necessary.
- Unplug the juicer from the power outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Do not immerse the motor base in water or any other liquid. Wipe the motor base with a damp cloth only.
- Do not operate the juicer if the power cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner. Contact customer support for assistance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
- Use only original Kuvings parts and accessories. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use the appliance for anything other than its intended purpose.
- Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting.
3. Product Components
Familiarize yourself with the parts of your Kuvings Whole Slow Elite C7000P Juicer:
- Motor Base: Contains the motor and control panel.
- Juicing Bowl: Collects juice and pulp during operation.
- Rotation Wiper: Rotates to clean the juicing screen and mix juice.
- Juicing Screen: Available in fine (for juice) and blank (for sorbets/smoothies) variations.
- Auger: The main component that crushes and presses ingredients.
- Hopper/Lid with Feeding Chute: Covers the juicing bowl and guides ingredients into the auger.
- Pulp Outlet: Discharges processed pulp.
- Juice Outlet (Smart Cap): Discharges extracted juice and can be closed to prevent drips.
- Pusher: Used to gently guide ingredients down the feeding chute.
- Cleaning Brush: Specialized brush for cleaning the juicing screen.
Note: An image illustrating each component would typically be included here for visual reference, but is not available in the provided data.
4. Assembly and Setup
Follow these steps to assemble your juicer before first use and after cleaning:
- Place the Motor Base: Position the motor base on a stable, flat, and dry surface.
- Attach the Juicing Bowl: Align the juicing bowl with the motor base. Rotate it clockwise until it clicks securely into place.
- Insert Rotation Wiper: Place the rotation wiper into the juicing bowl.
- Insert Juicing Screen: Select the desired juicing screen (fine for juice, blank for sorbet) and place it inside the rotation wiper, ensuring it sits firmly.
- Insert Auger: Place the auger into the center of the juicing screen, pressing down firmly until it is fully seated.
- Attach Hopper/Lid: Place the hopper/lid onto the juicing bowl. Align the red dot on the lid with the red dot on the juicing bowl, then rotate clockwise until it locks securely. The juicer will not operate if the lid is not correctly locked.
- Position Containers: Place a juice collection container under the juice outlet and a pulp container under the pulp outlet.
Note: Visual aids for each assembly step would typically be included here, but are not available in the provided data.
5. Operating Instructions
Once assembled, your Kuvings Whole Slow Elite C7000P Juicer is ready for use:
- Prepare Ingredients: Wash all fruits and vegetables thoroughly. For hard ingredients like carrots or beets, cut them into smaller pieces. For fibrous ingredients like celery or ginger, cut them into short lengths (approx. 1-2 inches) to prevent clogging. Remove any hard pits or large seeds from fruits. The 3-inch wide chute can accommodate whole fruits like apples, but cutting them may improve yield.
- Plug In: Ensure the juicer is properly assembled and then plug the power cord into a suitable electrical outlet.
- Start Juicing: Place your juice collection container under the juice outlet and a pulp container under the pulp outlet. Turn on the juicer using the power switch.
- Feed Ingredients: Slowly feed the prepared ingredients into the feeding chute. Allow the auger to pull the ingredients down naturally. Use the pusher only if necessary to gently guide ingredients. Do not force ingredients into the chute.
- Continuous Operation: The juicer is designed for continuous operation, but avoid overloading it. If the juicer slows down significantly or struggles, turn it off, clear any blockages, and restart.
- Finish Juicing: Once all ingredients have been processed, turn off the juicer and unplug it from the outlet.
- Smart Cap: Close the smart cap on the juice outlet to prevent any remaining drips before disassembling for cleaning.
6. Maintenance and Cleaning
Proper cleaning and maintenance will ensure the longevity and optimal performance of your juicer:
- Unplug Before Cleaning: Always unplug the juicer from the power outlet before disassembling or cleaning any parts.
- Disassembly: Disassemble the juicer in the reverse order of assembly (remove lid, auger, screen, rotation wiper, then juicing bowl).
- Rinse Immediately: Rinse all removable parts (juicing bowl, rotation wiper, juicing screens, auger, lid, pusher) under running water immediately after use. This prevents pulp from drying and sticking, making cleaning easier.
- Clean Juicing Screen: Use the specialized cleaning brush provided to thoroughly clean the juicing screen. Pay close attention to the small mesh holes to remove all pulp residue.
- Hand Wash Only: All juicing components are BPA-free. However, they are not dishwasher safe. Hand wash all removable parts with warm, soapy water.
- Clean Motor Base: Wipe the exterior of the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.
- Drying and Storage: Ensure all parts are completely dry before reassembling or storing the juicer. Store the juicer in a clean, dry place.
7. Troubleshooting
If you encounter any issues with your Kuvings Whole Slow Elite C7000P Juicer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Juicer does not turn on | Power cord not plugged in; Parts not assembled correctly; Safety sensor activated | Ensure power cord is securely plugged in. Check that the juicing bowl and lid are correctly aligned and locked into place. Disassemble and reassemble carefully. |
| Juicer stops during operation | Overload; Motor overheating; Blockage | Turn off and unplug. Disassemble and clear any blockages. If motor overheated, allow it to cool for 30 minutes before restarting. Feed ingredients slowly. |
| Excessive pulp in juice | Coarse screen used; Very soft ingredients | Ensure the fine juicing screen is used for juice extraction. Some very soft fruits may naturally produce more pulp. |
| Loud noise or vibration | Auger not seated correctly; Obstruction; Unstable surface | Turn off and unplug. Check if the auger is properly seated and not obstructed. Ensure the juicer is on a stable, flat surface. |
| Leaking from the base | Juicing bowl not locked; Damaged seals | Ensure the juicing bowl is correctly aligned and locked onto the motor base. Check if the silicone seals are properly in place and not damaged. |
8. Product Specifications
| Feature | Specification |
|---|---|
| Brand | Kuvings |
| Model Name | Whole Slow Juicer Elite C7000P |
| Item Model Number | C7000P |
| Color | Red |
| Special Feature | Programmable |
| Finish Type | Painted |
| Product Care Instructions | Hand Wash Only |
| Capacity | 0.6 Liters |
| Maximum Power | 150 Watts |
| Power Source | Corded Electric |
| Blade Material | Ultem |
| Is Dishwasher Safe | No |
| Manufacturer | Kuvings |
| UPC | 853447004687 |
| Product Dimensions | 9 x 8 x 17.5 inches |
| Item Weight | 21.3 pounds |
| Material | Plastic, Stainless Steel, Ultem |
| Date First Available | September 7, 2018 |
9. Warranty and Support
No specific warranty details were provided in the product data. For comprehensive warranty information, product registration, and customer support, please refer to the official Kuvings website or contact Kuvings customer service directly. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may visit the Kuvings Store on Amazon.





