Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LAMPAOUS Smart RGB Under Cabinet Lighting Kit. Please read this manual thoroughly before use to ensure proper function and safety.
Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Use only the provided power adapter. Using an incompatible adapter may damage the product or pose a safety risk.
- Do not attempt to disassemble or modify the product.
- Keep out of reach of children.
Package Contents
Verify that all components are present in your package:
- 6 x LED Light Bars
- 1 x Smart Control Box
- 1 x UL Listed Power Supply
- 1 x DC-DC Extension Cord
- 5 x 5-Pin Extension Cords
- 1 x 5-Pin Male to Female "Y" Shape Splitter
- 5 x 5-Pin Internal Connectors
- 6 x Self-adhesive Tapes
- 12 x Clips
- 12 x Screws for Clips
- 6 x Cable Clips
- 5 x Cable Tie Mounts
- 1 x Remote Control
Image: All components included in the LAMPAOUS Smart RGB Under Cabinet Lighting Kit, laid out for inspection.
Setup and Installation
1. Planning Your Layout
Before installation, plan the desired arrangement of your LED light bars. Consider the length of the cables and the placement of the power outlet.
Image: A diagram illustrating different ways to connect and arrange the LED light bars, including straight and corner configurations.
2. Mounting the Light Bars
The light bars can be mounted using either the provided adhesive tapes or screws and clips.
- Using Adhesive Tape: Clean the mounting surface thoroughly. Peel off the protective backing from the self-adhesive tape on the back of each light bar and firmly press the bar onto the desired surface.
- Using Screws and Clips: Position the clips on the desired surface and mark the screw holes. Drill pilot holes if necessary, then secure the clips with screws. Snap the LED light bars into the installed clips.
Image: A person demonstrating the installation of an LED light bar under a cabinet using the adhesive backing.
3. Connecting the Components
Connect the LED light bars to each other using the 5-pin internal connectors or extension cords as needed. Then, connect the smart control box to the first light bar and the UL listed power supply to the smart control box. Finally, plug the power supply into a wall outlet.
Image: A visual guide demonstrating how to connect multiple LED light bars in series, linking them to the smart control box and then to the power supply.
Operating Instructions
1. Remote Control
The included remote control allows for basic functions such as power ON/OFF, color selection, and brightness adjustment. Point the remote directly at the smart control box for optimal response.
Image: A hand holding the remote control, demonstrating its use to change the color of the under cabinet lighting.
2. Smart App Control (SmartLife App)
For advanced features and smart home integration, download the SmartLife App.
- Download and Login: Scan the QR code provided in the manual or search for "SmartLife" in your app store. Create an account or log in.
- Grant Application Permissions: Ensure the SmartLife App has necessary permissions (e.g., location, storage) for full functionality.
- Connecting the Light Bar to Phone App (Method 1 - Auto Scan):
- Ensure the light bar is powered on and blinking rapidly.
- Open the SmartLife App, select "Add Device" or "Auto Scan".
- Follow the on-screen prompts to connect to your Wi-Fi network.
Video: Step-by-step instructions for connecting the light bar to the SmartLife App using the "Auto Scan" method.
- Connecting the Light Bar to Phone App (Method 2 - AP Mode):
- If Auto Scan fails, try AP Mode. Ensure the light bar is powered on and blinking slowly.
- In the SmartLife App, select "Add Manually" and choose "Light Source (Wi-Fi)".
- Follow the on-screen prompts, connecting your phone to the "SmartLife-XXX" Wi-Fi network when instructed.
Video: Detailed guide on connecting the light bar to the SmartLife App using the "AP Mode" method for Wi-Fi pairing.
- Connecting the Light Bar to Phone App (Method 3 - Manual Wi-Fi Mode):
- This method involves manually adding the device via Wi-Fi settings.
- Open the SmartLife App, go to "Add Device" and select the appropriate lighting category.
- Follow the prompts to reset the device and connect to the "SmartLife-XXX" Wi-Fi network.
Video: Instructions for manually adding the light bar to the SmartLife App through Wi-Fi settings, including device reset and network connection steps.
Video: Instructions on how to download the SmartLife App and log in to your account.
Video: A guide to granting necessary application permissions for the SmartLife App on your mobile device.
3. Voice Control (Alexa & Google Assistant)
Once connected to the SmartLife App, you can link your lighting kit to Amazon Alexa or Google Assistant for voice control. Follow the instructions within the SmartLife App to integrate with your preferred voice assistant.
- Example commands: "Alexa, set kitchen lights to purple," "Google, turn on room light bars."
Image: A woman interacting with a smart speaker to control the color of her under cabinet lights using voice commands.
Video: A demonstration of the LAMPAOUS Under Cabinet Lighting Kit, showcasing its features including voice control with Alexa and Google Assistant, app control, and various lighting modes.
Maintenance
- Cleaning: Gently wipe the light bars with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the lights for an extended period, disconnect them from power and store them in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose connection, faulty power supply. | Check power outlet, ensure all connections are secure, test with another power source if possible. |
| Remote control not working. | Battery depleted, remote not pointed at receiver, interference. | Replace remote battery, ensure clear line of sight to the smart control box, reduce interference. |
| App connection issues. | Incorrect Wi-Fi password, 5GHz Wi-Fi network, device not in pairing mode. | Verify Wi-Fi password, ensure you are on a 2.4GHz network, follow app pairing instructions carefully (Auto Scan or AP Mode). |
| Lights flicker or change color unexpectedly. | Loose connection, power fluctuations, faulty light bar. | Check all connections, try plugging into a different outlet, contact customer support if problem persists. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LAMPAOUS |
| Model Number | YF-P-CA-05 |
| Color | Sliver White (Housing), RGB (Light) |
| Material | Aluminum alloy + plastic + LED lamp beads |
| Product Dimensions | 11.81"L x 1.18"W x 0.39"H (per light bar) |
| Power Source | Plug-in Electric |
| Voltage | 12 Volts |
| Wattage | 24 watts (Total for 6 light bars) |
| Brightness | 1920 Lumen |
| Control Method | App, Remote, Voice (Alexa, Google Assistant) |
| Connectivity Protocol | Wi-Fi (2.4GHz only) |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
Warranty and Support
For warranty information and customer support, please refer to the product packaging or contact LAMPAOUS directly through their official website or customer service channels. Keep your purchase receipt for warranty claims.