Surpassed Rechargeable Battery Pack User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Surpassed FNP50 Rechargeable Li-ion Battery Pack. This battery pack is designed as a replacement or spare for various digital cameras and camcorders, including the Kodak PlaySport Zx3 HD Pocket Video Camera.

2. Product Features

• High-quality replacement battery.
• High energy density for extended use.
• Long cycle life for durability.
• Provides extra power for digital video cameras and camcorders.
• High capacity (1300mAh) rechargeable Li-ion battery.
• No memory effect, allowing charging at any time.

3. Package Contents

• 2 x Surpassed FNP50 Rechargeable Li-ion Batteries

4. Compatibility

This battery pack is compatible with the following battery codes and digital camera models:

Compatible Battery Codes:

• Fujifilm NP-50A, NP-50
• Pentax D-LI68, D-LI122, K-BC115
• Kodak KLIC-7004

Compatible Digital Models:

• Fujifilm FinePix Series: F50FD, F60FD, F70EXR, F75EXR, F80EXR, F85EXR, F100FD, F200EXR, F300EXR, F305EXR, F500EXR, F505EXR, F550EXR, F600EXR, F605EXR, F660EXR, F665EXR, F750EXR, F770EXR, F775EXR, F800EXR, F850EXR, F900EXR Digital Camera
• Fujifilm FinePix REAL: 3D W3
• Fujifilm X Series: X10, XF1, X20 Digital Camera
• Fujifilm FinePix XP Series: XP100, XP110, XP150, XP160, XP170, XP200 Digital Camera
• Pentax Series: Q, Q7, Q10, Optio A36, Optio S10, Optio S12, Optio VS20, Q-S1 Digital Camera, WG-M2 Digital Camera
• Kodak Easyshare Series: M1033, M1093 is, M2008, V1073, V1233, V1253, V1273 Digital Camera
• Kodak Video Cameras: PLAYTOUCH Video Camera, PlaySport Zx3 HD Pocket Video Camera, Zi8 Pocket Video Camera

5. Setup and Installation

5.1 Initial Charging

Before first use, fully charge the battery. Use a compatible charger designed for Li-ion batteries. Charging times may vary depending on the charger and battery's initial charge level.

5.2 Inserting the Battery

1. Ensure your camera or camcorder is powered off.
2. Locate the battery compartment on your device. Refer to your device's manual for specific instructions.
3. Open the battery compartment cover.
4. Insert the Surpassed FNP50 battery, aligning the contacts correctly. Ensure it clicks securely into place.
5. Close the battery compartment cover.

6. Operating Instructions

6.1 Powering Your Device

Once the battery is correctly installed and charged, you can power on your compatible camera or camcorder as usual. The battery will provide the necessary power for operation.

6.2 Recharging

When the device indicates low battery, remove the battery and place it in a compatible charger. Li-ion batteries do not suffer from memory effect, so you can recharge them even if not fully depleted.

7. Maintenance and Storage

• Keep the battery contacts clean. Use a dry, soft cloth to wipe them if necessary.
• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, it is recommended to store Li-ion batteries with a partial charge (around 50%).
• Avoid fully discharging the battery for extended periods, as this can reduce its lifespan.

8. Safety Information and Cautions

WARNING: Improper handling of Li-ion batteries can lead to fire, explosion, or burns.

• DO NOT connect improperly.
• DO NOT dispose of in fire or expose to excess heat.
• DO NOT crush, puncture, incinerate, or short circuit external contacts.
• Keep batteries out of reach of children.
• If the battery leaks, swells, or emits an unusual odor, discontinue use immediately.
• Use only chargers specifically designed for Li-ion batteries.
• Do not disassemble the battery.

Disposal: Dispose of used batteries according to local regulations. Do not dispose of with household waste.

9. Troubleshooting

9.1 Battery Not Charging

• Ensure the battery is correctly inserted into the charger.
• Verify the charger is properly connected to a power source.
• Check if the charger or battery contacts are clean and free of debris.
• Try using a different compatible charger if available.

9.2 Device Not Powering On

• Confirm the battery is fully charged.
• Ensure the battery is correctly inserted into the device's compartment.
• Check the device's battery contacts for any obstruction or damage.
• Test with another fully charged battery if possible.

10. Specifications

11. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt for warranty claims.

12. Product Images