Introduction
This manual provides essential information for the safe and effective use of your TONIWA 2 Prong Power Cord. Please read these instructions carefully before use and retain them for future reference. This power cord is designed as a replacement or spare for compatible devices, specifically the ION Game Day Wireless Rechargeable Speaker System and Ion Sport XL Speaker.
Product Overview
The TONIWA 2 Prong Power Cord is a reliable replacement power cable featuring a 2-slot connector. It is UL Listed, ensuring safety and quality standards. The cord is constructed with high-quality materials designed to resist bending and high temperatures, promoting durability and safe operation.
Image: The TONIWA 2 Prong Power Cord, showing both the standard two-prong wall plug and the two-slot connector designed for compatible devices.
- Power Cord Type: 2-Slot, 18 AWG, 125V 7A
- Length: 6 Feet (other lengths available: 3FT, 12FT)
- Color: Black
- Safety: UL Listed for tested and certified quality
- Compatibility: Specifically designed for ION Game Day Wireless Rechargeable Speaker System and Ion Sport XL Speaker.
Setup
Follow these steps to properly connect your TONIWA 2 Prong Power Cord to your compatible speaker system.
- Verify Compatibility: Ensure your speaker system requires a 2-slot power cord. Refer to your speaker's original manual or the power input port for the correct connector type.
- Locate Power Input: Identify the power input port on your ION Game Day Wireless Rechargeable Speaker System or Ion Sport XL Speaker. This port typically has two small, round openings.
- Connect to Speaker: Align the 2-slot connector end of the TONIWA power cord with the speaker's power input port. Gently push the connector firmly into the port until it is securely seated. Do not force the connection.
- Connect to Power Outlet: Insert the two-prong plug end of the power cord into a standard 125V AC wall outlet. Ensure the outlet is easily accessible and in good condition.
- Power On: Once connected, you can power on your speaker system according to its operating instructions.
Image: A visual guide demonstrating the correct way to connect the 2-slot power cord into the compatible ION wireless speaker's power input port.
Image: A compatibility diagram illustrating the correct 2-slot power input type for this cord, alongside examples of incompatible power input types.
Operating
The TONIWA 2 Prong Power Cord functions as a direct power supply or charging cable for your compatible speaker. Once properly connected to both the speaker and a power outlet, it will provide the necessary electrical current for operation or battery charging.
- Ensure the cord is not kinked or pinched during use.
- Avoid placing heavy objects on the cord.
- Do not use the cord if it appears damaged.
Maintenance
Proper care of your power cord will ensure its longevity and safe operation.
- Cleaning: Disconnect the cord from the power outlet and the device before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or bending at sharp angles, as this can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, exposed wires, or discolored insulation. If any damage is observed, discontinue use immediately and replace the cord.
Image: A close-up view of the power cord highlighting its reinforced stress points, designed to enhance durability and withstand wear and tear.
Troubleshooting
If you encounter issues with your power cord, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker not powering on/charging | Cord not fully inserted; faulty outlet; damaged cord; speaker issue. | Ensure both ends of the cord are securely connected. Test the outlet with another device. Inspect the cord for damage; replace if necessary. Consult your speaker's manual for speaker-specific troubleshooting. |
| Cord feels hot | Overload; damaged cord; poor ventilation. | Immediately disconnect the cord. Ensure the speaker's power requirements do not exceed the cord's rating (125V 7A). Inspect for damage. Ensure adequate ventilation around the speaker and cord. |
| Loose connection | Improper insertion; worn out port/connector. | Re-insert the cord firmly. If the connection remains loose, the port on the speaker or the cord's connector may be worn. Consider replacing the cord or having the speaker serviced. |
Specifications
- Model Number: E365821
- Power Cord Type: 2-Slot
- Wire Gauge: 18 AWG
- Voltage Rating: 125 Volts
- Current Rating: 7 Amps
- Plug Format: Type A (US standard 2-prong)
- Connector Gender: Male-to-Female
- Length: 6 Feet (other lengths available: 3FT, 12FT)
- Color: Black
- Certifications: UL Listed
- Manufacturer: TONIWA
- Item Weight: 5 ounces
- Package Dimensions: 6.06 x 4.69 x 0.71 inches
Warranty and Support
For information regarding warranty coverage or technical support for your TONIWA 2 Prong Power Cord, please refer to the manufacturer's official website or contact their customer service directly. Details are typically available on the product packaging or the TONIWA brand store on Amazon.
Manufacturer: TONIWA
For further assistance, please visit the TONIWA Store on Amazon.