WOLTU BH95cm-4 Dining Chair Instruction Manual

1. Introduction

Thank you for choosing the WOLTU BH95cm-4 Dining Chairs. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.

This image displays a complete set of four WOLTU dining chairs, model BH95cm-4, in a cream white velvet finish, positioned around a wooden dining table. It illustrates the chairs' aesthetic and how they appear in a typical dining room setting.

Key Features:

• Durable and Sturdy: Wear and tear-resistant velvet surface with high-resilience sponge padding. Features a metal cross brace and solid wood legs for strength and durability.
• Ergonomic and Comfortable: Curved backrest and soft seat provide ample back support. Armrests allow for comfortable relaxation, reducing fatigue during extended sitting.
• Anti-slip and Floor Protection: All feet are equipped with protective pads to ensure stability, prevent slipping, and protect floors from scratches while reducing noise.
• Versatile Design: Simple and elegant appearance with striped patterns, suitable for various settings including kitchen, cafe, conference room, lounge, vanity, bedroom, office, or reception areas.

2. Safety Information

• Always assemble the chairs on a soft, clean surface to prevent damage.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum load capacity of 150 kg (330 lbs).
• Keep small parts away from children during assembly to avoid choking hazards.
• Avoid standing on the chair or using it as a step stool.
• Do not expose the chair to direct sunlight or extreme temperatures for prolonged periods, as this may cause material degradation.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact WOLTU customer service.

• Chair Seat (with backrest and armrests)
• Set of 4 Wooden Legs
• Metal Cross Brace
• Assembly Hardware (screws, washers, Allen key)
• Instruction Manual

4. Assembly Instructions

Follow these steps carefully to assemble your WOLTU dining chair. Illustrated instructions and numbered parts are provided to facilitate assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Attach Legs to Metal Cross Brace: Secure the four wooden legs to the metal cross brace using the provided screws and Allen key. Ensure they are firmly attached.
3. Attach Leg Assembly to Seat: Align the assembled leg structure with the pre-drilled holes on the underside of the chair seat. Insert the screws and tighten them securely with the Allen key.
4. Check Stability: Once assembled, gently place the chair on a flat surface. Ensure all legs are even and the chair is stable. Adjust the floor protection pads on the feet if necessary to eliminate any wobbling.

This image illustrates the core features of the WOLTU dining chair, including the sturdy metal frame and wooden legs, which are key components during assembly.

5. Usage Instructions

The WOLTU BH95cm-4 dining chair is designed for comfortable seating in various indoor environments.

• Use the chair on a flat, stable surface to prevent tipping.
• Sit centrally on the seat to distribute weight evenly.
• Utilize the armrests for added comfort and support.
• The ergonomic design with a curved backrest is intended to provide optimal lumbar support for extended periods of sitting.

6. Maintenance

Proper care will extend the life and appearance of your WOLTU dining chairs.

• Cleaning: For general cleaning, wipe the velvet surface with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Dusting: Regularly dust the chair with a soft brush or vacuum cleaner with an upholstery attachment to prevent dust buildup in the velvet fibers.
• Legs: Wipe wooden legs with a dry or slightly damp cloth. Avoid excessive moisture.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Environment: Keep the chair away from direct heat sources and prolonged direct sunlight to prevent fading or damage to the velvet and wood.

7. Troubleshooting

Common Issues and Solutions:

• Chair is Wobbly:
  • Ensure all assembly screws are fully tightened.
  • Check if the floor protection pads on the feet are evenly adjusted. Rotate them to find a stable position.
• Squeaking Noise:
  • Re-tighten all screws. Sometimes, loose connections can cause noise.
  • Ensure the metal cross brace is correctly seated and secured.
• Difficulty Assembling:
  • Refer to the illustrated instructions provided in the package.
  • Ensure you are using the correct screws for each step as indicated by the numbered parts.

8. Specifications

This diagram provides precise measurements for the WOLTU dining chair, model BH95cm-4. Key dimensions include a total height of 81 cm, seat height of 44 cm, seat width of 40 cm, and seat depth of 40 cm, along with overall width and depth.

9. Warranty and Support

WOLTU products are manufactured with quality and durability in mind. For any questions regarding assembly, missing parts, or product defects, please contact WOLTU customer service through the retailer where you purchased the product. Please have your purchase receipt and product model number (BH95cm-4) available when contacting support.

For more information about WOLTU products, you can visit the official WOLTU store: WOLTU Store.