Lancoon Wooden Digital Clock Multi-Function LED Alarm Clock Instruction Manual

1. Product Overview

The Lancoon Wooden Digital Clock (Model LK-AC11) is a multi-functional device designed to display time, date, and temperature. It features an LED display, three alarm settings, adjustable brightness, and a voice control power-saving mode. Its wooden texture complements various home and office environments.

Image 1.1: Front view of the Lancoon Wooden Digital Clock displaying time and temperature.

Key Features:

• Time Display: 12-hour or 24-hour format.
• Date Display: Year, Month, Day.
• Temperature Display: Celsius (°C) or Fahrenheit (°F).
• Alarm Function: Up to 3 independent alarms.
• Brightness Adjustment: 3 levels of LED display brightness.
• Power Saving Mode: LED display can be activated by sound (over 60dB), pat, or knock.
• Power Source: Primarily powered via USB cable.

Image 1.2: Visual representation of the clock's multi-functional features.

2. Setup and Initial Configuration

2.1 Power Connection

The Lancoon Digital Clock is designed to be mains powered. Connect the provided USB cable to the DC 5V charging hole on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port.

Image 2.1: The clock requires continuous power via the USB cable for operation.

While the clock primarily uses mains power, it may require 4 AAA batteries (not included) for backup power to retain settings during power outages. However, the display will not remain on when running solely on battery power in power-saving mode.

Image 2.2: Rear view of the clock with control buttons and power input labeled.

2.2 Button Functions

• SET Button: Used to enter setting modes and confirm selections.
• UP Button: Used to increase values or navigate through options.
• DOWN Button: Used to decrease values or navigate through options. Also functions as the °C/°F toggle in temperature display mode.
• RESET Button: A small button (often recessed) to reset the clock to factory defaults. Use a thin object like a paperclip to press.

3. Operating Instructions

3.1 Setting Time and Date

1. Press the SET button to enter time setting mode. The hour digits will flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press SET again to move to minute setting. Adjust minutes with UP or DOWN.
4. Continue pressing SET to cycle through Year, Month, and Day settings, adjusting each with UP or DOWN.
5. After setting the day, press SET to exit the date setting.
6. The clock will then prompt for 12/24 hour format. Use UP or DOWN to select and SET to confirm.

3.2 Setting Alarms (A1, A2, A3)

The clock supports up to three independent alarms (A1, A2, A3).

1. From normal display mode, press the SET button repeatedly until "A1" appears on the display.
2. Press SET to enter A1 alarm setting. The hour digits will flash.
3. Use UP or DOWN to set the alarm hour. Press SET.
4. Use UP or DOWN to set the alarm minute. Press SET.
5. The display will show "ON" or "--" (OFF). Use UP or DOWN to enable or disable the alarm. Press SET to confirm and exit A1 setting.
6. Repeat steps for A2 and A3 if desired.

Image 3.1: The clock supports setting up to three distinct alarms.

3.3 Temperature Display (°C/°F)

The clock displays temperature in either Celsius or Fahrenheit.

• In normal display mode, press the DOWN button to toggle between Celsius (°C) and Fahrenheit (°F).

3.4 Brightness Adjustment

The LED display has 3 levels of brightness.

• In normal display mode, press the UP button to cycle through the three brightness levels.

3.5 Power Saving Mode (Voice Control)

To conserve power, the clock can enter a power-saving mode where the LED display turns off. It can be reactivated by sound.

1. To activate or deactivate power saving mode, press the DOWN button and hold for approximately 3 seconds. The display will show "ON:Sd" (Sound On) or "--:Sd" (Sound Off).
2. When "ON:Sd" is active, the display will turn off after a few seconds of inactivity.
3. To reactivate the display, make a sound louder than 60dB (e.g., clap hands, tap the clock).

Image 3.2: The clock's display can be activated by sounds exceeding 60dB in power-saving mode.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the clock's surface. Avoid abrasive cleaners or solvents.
• Placement: Place the clock on a stable, flat surface. Avoid direct sunlight, high temperatures, and high humidity.
• Power: Ensure the clock is connected to a stable power source. Disconnect power during extended periods of non-use.
• Battery Replacement: If using AAA batteries for backup, replace them periodically to ensure settings are retained during power interruptions.

5. Troubleshooting

6. Specifications

Image 6.1: Dimensions of the Lancoon Wooden Digital Clock.

7. Warranty and Support

For product support or warranty inquiries, please contact Lancoon customer service. Refer to your purchase documentation for specific warranty terms and contact information.

You can also visit the official Lancoon store for more information: Lancoon Store