User Manual: Anti-Glare PET POS Touch Screen Protector for HiStone HK560 (15.6 inch)

Introduction

This manual provides instructions for the installation, use, and maintenance of your Anti-Glare PET POS Touch Screen Protector, designed for the HiStone HK560 Wide Format Screen (15.6 inch, cut size 14.5" x 9.0" with rounded corners). This protector is engineered to safeguard your POS system's display from scratches, reduce glare, and minimize fingerprints, ensuring optimal screen clarity and longevity.

Safety Information

Please read and follow these safety guidelines to ensure proper handling and application of the screen protector:

• Keep the screen protector and accessories out of reach of children to prevent accidental ingestion.
• Avoid bending or creasing the screen protector, as this may cause permanent damage and affect its adhesion.
• Do not apply excessive force during installation, which could damage the screen protector or the device's screen.
• Dispose of packaging materials responsibly.

Package Contents

Verify that all items are present in the package:

• 1 x Anti-Glare PET POS Touch Screen Protector
• 1 x Application Card (Squeegee)
• 1 x Cleaning Cloth
• 1 x Instruction Sheet (this manual)

Setup and Installation

Follow these steps carefully for a bubble-free installation:

1. Prepare Your Workspace: Choose a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen.
2. Clean the Screen: Use the provided cleaning cloth to meticulously clean the HiStone HK560 screen. Ensure there are no dust particles, smudges, or fingerprints. For stubborn marks, a screen cleaner (not included) can be used, followed by drying with the cleaning cloth.
3. Align the Protector: Carefully peel back a small portion of the protective film (usually labeled "Step 1" or similar) from one corner of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your device's screen. Ensure precise alignment with all edges and cutouts.
4. Apply Gradually: Once aligned, slowly and steadily peel off the rest of the protective film while simultaneously applying the screen protector to the screen. Use the application card (squeegee) to gently push out any air bubbles towards the edges as you go.
5. Remove Bubbles: If bubbles remain, gently lift the nearest edge of the screen protector and reapply, using the application card to smooth it down. Small bubbles may disappear on their own within 24-48 hours.
6. Final Cleaning: Once applied, use the cleaning cloth to wipe down the surface of the newly installed screen protector.

Note: The screen protector is designed for easy installation and removal without leaving residue. If you need to reposition, gently lift an edge and reapply.

Operating Instructions

After installation, your HiStone HK560 touch screen will function normally with enhanced protection:

• Touch Sensitivity: The protector maintains the original touch sensitivity of your screen, ensuring smooth and accurate interaction.
• Glare Reduction: The anti-glare finish reduces reflections from overhead lighting or sunlight, improving visibility in various environments.
• Fingerprint Resistance: The top coating helps to reduce the adherence of fingerprints, keeping your screen cleaner for longer.

Maintenance

To keep your screen protector in optimal condition:

• Cleaning: Use the provided cleaning cloth or a soft, lint-free cloth to wipe the screen protector. For deeper cleaning, lightly dampen the cloth with water or a mild, non-abrasive screen cleaner. Avoid harsh chemicals or abrasive materials.
• Avoid Sharp Objects: While the protector is scratch-resistant, avoid contact with sharp objects that could potentially damage it.

Troubleshooting

Here are solutions to common issues you might encounter:

• Bubbles After Installation: Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and reapply, using the application card to push the air out. Ensure the screen is completely clean before reapplication.
• Dust Particles Under Protector: If dust is trapped, carefully lift the protector from the nearest corner using a piece of tape to dab the dust off both the screen and the protector's adhesive side. Reapply slowly.
• Misalignment: If the protector is significantly misaligned, gently peel it off completely, clean the screen again, and restart the application process from step 3.

Specifications

Warranty and Support

This product is manufactured to high-quality standards. For any questions, concerns, or support regarding your screen protector, please contact the seller or manufacturer directly through your purchase platform. Please refer to your purchase documentation for specific warranty details, if applicable.