1. Introduction
This manual provides detailed instructions for the installation, maintenance, and general information regarding your new Garage-Pro Front Fender Liner, designed for the Left Hand (LH) side of Geo Prizm vehicles manufactured between 1993 and 1997. This product is an aftermarket replacement part engineered to meet original equipment specifications.
Image 1.1: Main view of the Garage-Pro Front Fender Liner.
2. Product Functionality and Purpose
The fender liner serves as a protective barrier within the wheel well of your vehicle. Its primary functions include:
- Protection from Debris: Shields engine components, wiring, and other sensitive parts from road debris, water, salt, and mud.
- Corrosion Prevention: Helps prevent rust and corrosion by minimizing exposure of metal parts to moisture and corrosive elements.
- Noise Reduction: Contributes to reducing road noise by dampening sounds from the tires and wheel well.
- Aerodynamics: Assists in maintaining the vehicle's aerodynamic profile by smoothing airflow within the wheel arch.
3. Installation Instructions
This section outlines the general procedure for replacing a front fender liner. Professional installation is recommended if you are unfamiliar with automotive repairs. Ensure the vehicle is parked on a level surface with the engine off and the parking brake engaged.
3.1. Required Tools
- Jack and Jack Stands (for vehicle lifting)
- Lug Wrench (for wheel removal, if necessary)
- Screwdriver Set (Phillips and Flathead)
- Trim Removal Tools (plastic pry tools)
- Socket Wrench Set
- Replacement Clips/Fasteners (if old ones are damaged)
3.2. Step-by-Step Installation
- Prepare the Vehicle:
Safely lift the front of the vehicle using a jack and secure it with jack stands. This provides access to the wheel well. Consider removing the wheel for better access, if needed.
- Locate and Remove Old Fender Liner:
Identify the existing fender liner. It is typically secured by various clips, screws, and sometimes bolts along its perimeter and within the wheel well. Carefully remove all fasteners using appropriate tools. Plastic trim removal tools are useful for prying out plastic clips without damage.
Image 3.1: Side view of the fender liner, highlighting potential mounting points.
- Inspect and Clean:
Once the old liner is removed, inspect the wheel well area for any accumulated dirt, rust, or damage. Clean the area thoroughly to ensure a proper fit for the new liner.
- Position the New Fender Liner:
Carefully position the new Garage-Pro fender liner into the wheel well. Align the mounting holes on the liner with the corresponding holes on the vehicle's chassis and fender. Ensure the liner sits flush against the vehicle's body.
Image 3.2: Angled view of the fender liner, illustrating its contours for proper fitment.
- Secure the New Fender Liner:
Begin securing the new liner using the original fasteners or new replacement clips/screws. Start with a few key fasteners to hold the liner in place, then proceed to secure all remaining points. Ensure all fasteners are tight but do not overtighten, especially plastic clips, to avoid damage.
Image 3.3: Underside view of the fender liner, showing structural details and potential attachment points.
- Final Check:
Once all fasteners are in place, gently tug on the fender liner to ensure it is securely attached and does not have any loose sections. Verify that there are no gaps that could allow debris to enter.
Image 3.4: Another angled view of the fender liner, demonstrating its full shape and coverage.
- Lower Vehicle:
Carefully lower the vehicle from the jack stands. If the wheel was removed, reattach it and torque the lug nuts to the manufacturer's specifications before lowering.
4. Maintenance
The Garage-Pro Fender Liner is designed for durability and minimal maintenance. However, periodic inspection and cleaning can extend its lifespan and ensure continued protection:
- Regular Cleaning: During routine car washes, spray the wheel wells to remove accumulated dirt, mud, and road salt. This prevents buildup that could potentially cause premature wear or corrosion to surrounding components.
- Periodic Inspection: Annually, or after driving through harsh conditions (e.g., heavy snow, off-road), inspect the fender liner for cracks, tears, or loose fasteners. Ensure all clips and screws are securely in place.
- Damage Assessment: If the liner sustains damage from impacts or road debris, assess the extent of the damage. Minor cracks may not require immediate replacement, but significant damage compromising its protective function should prompt replacement.
5. Troubleshooting
This section addresses common concerns related to fender liners:
- Liner is Loose or Rattling:
Check all fasteners (clips, screws, bolts) securing the fender liner. Tighten any loose fasteners or replace any broken clips. Ensure the liner is correctly seated in its designated position.
- Debris Accumulation Behind Liner:
This may indicate a gap or improper fitment. Re-inspect the installation to ensure all edges are flush and all fasteners are secure. If necessary, remove the liner, clean the area, and reinstall it carefully.
- Liner is Damaged (Cracked/Torn):
Small cracks may not immediately affect functionality, but large tears or holes compromise protection. Consider replacing the liner if damage is extensive to maintain optimal vehicle protection.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Garage-Pro |
| Model Number | JCWG222102GP |
| Material | Plastic |
| Auto Part Position | Front, Driver Left Side (LH) |
| Vehicle Service Type | Car |
| Fit Type | Vehicle Specific Fit (Geo Prizm 1993-1997) |
| Item Weight | 1.8 pounds |
| Product Dimensions (L x W x H) | 16 x 11.33 x 10 inches |
| OEM Part Number | 94852070 |
| ABPA Partslink Number | GM1250101 |
| UPC | 195975349305 |
7. Warranty Information
This Garage-Pro Fender Liner comes with a FREE 1-year UNLIMITED mileage warranty coverage. This warranty covers defects in material and workmanship under normal use and service. For warranty claims or further details, please refer to the Garage-Pro official website or contact customer support.
8. Support and Contact
For technical assistance, installation queries, or warranty support, please contact Garage-Pro customer service. You can find contact information on the official Garage-Pro website or through your original point of purchase.
Website: Visit the Garage-Pro Store on Amazon
