John Timberland Stratton Street Outdoor Wall Light

1. Product Overview

The John Timberland Stratton Street Outdoor Wall Light is a traditional lantern-style fixture designed for exterior use. It features a textured black finish and clear glass panels, accommodating two candelabra base bulbs. This fixture is wet location rated, making it suitable for various outdoor environments.

Image 1: Front view of the John Timberland Stratton Street Outdoor Wall Light, showcasing its textured black finish and clear glass panels.

2. Safety Information

• Always turn off the power at the main fuse or circuit breaker box before beginning installation.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure all electrical connections are made in accordance with local codes and ordinances.
• Do not exceed the maximum wattage specified for the bulbs.
• This fixture is rated for wet locations but is not recommended for use in coastal climates due to potential corrosion.

3. Package Contents

Verify that all components are present before beginning installation:

• Outdoor Wall Light Fixture (1)
• Mounting Hardware (Screws, Wire Nuts, Mounting Plate)
• Instruction Manual (1)

Note: Bulbs are not included and must be purchased separately.

4. Setup and Installation

Follow these steps for proper installation of your outdoor wall light:

1. Prepare the Installation Area: Turn off power at the circuit breaker. Ensure the mounting surface is clean and stable.
2. Attach Mounting Plate: Secure the mounting plate to the electrical junction box using the provided screws.
3. Make Electrical Connections: Connect the fixture's wires to your household electrical wires. Connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Secure connections with wire nuts.
4. Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the wall.
5. Install Bulbs: Insert two maximum 60-watt candelabra base bulbs (E12) into the sockets.

Image 2: Detail of the fixture's mounting arm and backplate, illustrating how it attaches to the wall.

Image 3: View inside the lantern showing the two candelabra bulb sockets.

5. Operating Instructions

Once installed and bulbs are in place, restore power at the circuit breaker. The light fixture can be operated using a standard wall switch connected to the electrical circuit. Ensure the switch is in the 'ON' position for illumination.

6. Maintenance

• Cleaning: To clean the fixture, turn off the power. Wipe the textured black finish with a soft, damp cloth. Clean the clear glass panels with a glass cleaner and a soft cloth to avoid streaks. Do not use abrasive cleaners.
• Bulb Replacement: Turn off the power before replacing bulbs. Allow bulbs to cool completely. Unscrew old bulbs and replace with new candelabra base (E12) bulbs, not exceeding 60 watts each.
• Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections.

7. Troubleshooting

• Light Does Not Turn On:
  • Check if the power is on at the circuit breaker.
  • Ensure bulbs are correctly installed and not burnt out.
  • Verify all electrical connections are secure.
• Light is Dim:
  • Ensure bulbs are of the correct wattage and type.
  • Check for loose connections.

8. Specifications

Image 4: Dimensional drawing of the outdoor wall light, indicating height, width, and extension from the wall.

9. Warranty and Support

This John Timberland product comes with a Limited 1-year warranty. For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

10. Product Video

Video 1: An official brand video from John Timberland (Lamps Plus) showcasing various outdoor lighting styles and fountains. This video provides a general overview of the brand's product aesthetics.