1. Product Overview
The MG PRIME Car Paint Aerosol Cans provide a professional solution for automotive paint repairs. This set includes a base coat and a clear coat, specifically formulated for Ford America vehicles with color code U9 / 5EQCWWA, named Blanco Champana. The high-quality formulation ensures excellent coverage, quick drying, and precise color matching, making it ideal for repairing body parts made of metallic and plastic materials.
Image 1.1: MG PRIME Base Coat and Clear Coat Aerosol Cans.
2. Components Included
Each package contains the following items:
- 1 x 400 ml aerosol can of base coat for Ford America U9 / 5EQCWWA Blanco Champana.
- 1 x 400 ml aerosol can of high-gloss clear coat.
- Each aerosol can is equipped with an adjustable spray head nozzle.
Image 2.1: Individual Base Coat and Clear Coat Aerosol Cans.
3. Setup and Preparation
Proper preparation is crucial for achieving optimal results. Follow these steps before application:
- Surface Cleaning: The surface to be painted must be dust-free, dry, and free of grease. Clean it thoroughly, preferably with a silicone remover if necessary.
- Temperature: Ensure the target object and the aerosol cans are at a temperature between 20°C and 25°C (68°F to 77°F) for best application.
- Shake Cans: Shake the aerosol can vigorously for at least 2 minutes before use. The mixing ball inside should be clearly audible.
- Test Spray: Before applying to the actual surface, perform a test spray on a similar material or an inconspicuous area to check the color match and spray pattern.
Image 3.1: Verify Color Code and Test Spray.
4. Operating Instructions (Application)
Follow these steps for applying the base coat and clear coat:
- Base Coat Application - First Layer: Spray the object with a thin, even foundation layer of the base coat. Allow it to flash off (dry to a matte finish) before applying subsequent layers.
- Base Coat Application - Subsequent Layers: Apply the base coat in 1 to 2 additional layers, allowing adequate flash-off time between each layer.
- Base Coat Drying: After the last base coat layer, allow it to dry completely. This typically takes approximately 60 minutes. The base coat surface should appear completely matte when dry.
- Clear Coat Application: Once the base coat is completely dry, apply the clear coat in the same manner (1 to 2 layers) to achieve a brilliant, protective finish.
Coverage: One 400 ml aerosol can is sufficient for approximately 1.3 m² (14 sq ft).
Image 4.1: Adjustable Spray Nozzle for Optimal Application.
Image 4.2: Application Instructions on Can Label.
5. Maintenance
After application, ensure the painted surface is fully cured before exposing it to harsh conditions or washing. Store unused aerosol cans in a cool, dry place, away from direct sunlight and sources of ignition. Ensure the caps are securely placed to prevent nozzle clogging.
6. Troubleshooting
While these products are designed for ease of use, here are some common issues and general advice:
- Poor Coverage/Uneven Finish: Ensure the can is shaken thoroughly before and during use. Apply thin, even coats rather than one thick coat. Check surface preparation for contaminants.
- Drips or Runs: This usually indicates applying too much paint at once or holding the can too close to the surface. Apply lighter, more even passes.
- Rough Texture: Can be caused by applying paint in too dry an environment, or if the surface was not properly cleaned. Ensure proper temperature and humidity, and clean the surface meticulously.
- Color Mismatch: Always perform a test spray on an inconspicuous area or scrap material before applying to the main surface to verify color accuracy.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | MG PRIME |
| Manufacturer | MG Colors GmbH |
| Model Number | 4062146486663 |
| Color | Blanco Champana (Ford America U9 / 5EQCWWA) |
| Finish Type | Glossy (Clear Coat) |
| Item Volume | 800 Milliliters (2 x 400ml cans) |
| Coverage | Approx. 1.3 m² per 400ml can |
| Item Weight | 791 Grams |
| Special Features | UV resistant, Quick drying, Weather resistant, Color resistant |
| Recommended Surface | Car, Motorcycle, Metal, Plastic |
| Country of Origin | Germany |
Image 7.1: Typical Paint Layer Thickness Diagram.
8. Safety Information
Aerosol products contain flammable propellants and solvents. Always adhere to safety guidelines:
- Use in a well-ventilated area.
- Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Do not pierce or burn, even after use.
- Do not spray on an open flame or other ignition source.
- Protect from sunlight. Do not expose to temperatures exceeding 50°C (122°F).
- Keep out of reach of children.
- Wear appropriate personal protective equipment, including gloves and eye protection.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
VOC Regulation: By purchasing this product, you agree to the applicable VOC regulation 2004/42/EC or 199/13/EC.
9. Warranty and Support
This product is manufactured by MG Colors GmbH. For any questions, technical support, or warranty inquiries, please contact the manufacturer directly. Information regarding spare parts availability is currently unavailable.
Manufacturer: MG Colors GmbH
Please refer to the product packaging or the seller's information for specific contact details or warranty terms.