Introduction
Thank you for choosing the BXROIU 100 LED USB String Lights. This manual provides detailed instructions for the safe and efficient use of your new string lights. Designed for various decorative purposes, these lights feature a flexible silver wire, USB power, and a remote control with multiple lighting modes and a timer function. Please read this manual thoroughly before use and retain it for future reference.
Package Contents
Upon opening the package, please ensure all items listed below are present and in good condition:
- 2 x 10-meter 100 LED Fairy Lights (Warm White)
- 2 x 13-Key Remote Controls
Image: Two sets of BXROIU 100 LED USB string lights, each with a USB plug and a remote control.
Product Features
- 8 Lighting Modes: Includes Combination, In Wave, Sequential, Slo Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady On.
- Timer Function: Automatically turns on for 6 hours and off for 18 hours daily.
- USB Powered: Operates on 5V DC, allowing connection to any USB port or power bank.
- Flexible Silver Wire: High-quality, thin, and flexible silver wire for easy shaping and wrapping.
- Remote Control: Conveniently adjust modes, brightness, and timer settings.
- Waterproof Design: Suitable for both indoor and outdoor decorative use.
Setup Instructions
- Unpack the Lights: Carefully uncoil the string lights from their packaging. The silver wire is flexible, allowing for easy manipulation.
- Power Connection: Insert the USB plug into any standard 5V USB port. This can be a USB wall adapter, a power bank, a computer, or any other compatible USB power source.
Image: The USB plug of the string lights connected to various power sources, including a wall adapter, a power bank, and a laptop.
- Placement: Position the string lights as desired. The flexible wire allows them to be wrapped around plants, railings, furniture, or integrated into various decorations.
- Remote Control Battery: The remote control requires 1 Lithium metal battery (included). Ensure it is correctly inserted.
Operating Instructions
The BXROIU string lights can be operated using the included remote control or the button on the USB plug.
Using the Remote Control
Image: A diagram illustrating the buttons and functions of the 13-key remote control for the string lights.
- ON/OFF: Press the ON button to turn the lights on, and the OFF button to turn them off.
- Mode Selection: Use buttons 1 through 8 to cycle through the different lighting modes:
- 1: Combination
- 2: In Wave
- 3: Sequential
- 4: Slo Glo
- 5: Chasing/Flash
- 6: Slow Fade
- 7: Twinkle/Flash
- 8: Steady On
- Brightness Adjustment: Use the DIM - button to decrease brightness and the DIM + button to increase brightness.
Using the USB Plug Button
The button on the USB plug allows for basic control if the remote is not available:
- Press the button repeatedly to cycle through the 8 lighting modes.
- The timer function and brightness adjustment are only available via the remote control.
Timer Function
The timer function allows the lights to operate automatically for 6 hours and then turn off for 18 hours, repeating the cycle daily.
- Activate Timer: With the lights on, press the TIMER button on the remote control. The string lights will flash once to confirm the timer setting is active.
- Timer Cycle: Once activated, the lights will remain on for 6 hours, then automatically turn off for 18 hours. This 24-hour cycle will repeat daily at the time you initially activated the timer.
- Deactivate Timer: To cancel the timer function, press the TIMER button again, or turn the lights off and then on manually.
Maintenance
- Cleaning: Gently wipe the lights with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use, carefully coil the string lights and store them in a cool, dry place away from direct sunlight.
- Water Resistance: The lights are designed to be waterproof, but the USB plug should be protected from direct water exposure, especially during outdoor use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the USB port, loose connection, or faulty USB port. | Ensure the USB plug is securely connected. Try a different USB power source. Check if the power source is active. |
| Remote control is not working. | Remote battery is dead or incorrectly inserted. Obstruction between remote and USB receiver. | Replace the remote control battery. Ensure the battery is inserted with correct polarity. Remove any obstructions. Point the remote directly at the USB receiver. |
| Lights are dim or flickering. | Low power supply or brightness setting is too low. | Ensure the USB power source provides sufficient power. Increase brightness using the remote control's DIM + button. |
| Timer function not activating or deactivating correctly. | Incorrect timer activation or interference. | Ensure the TIMER button is pressed firmly and the lights flash once to confirm. Try reactivating the timer. |
Specifications
| Brand | BXROIU |
| Model Number | ES-LCL-10M |
| Light Source Type | LED |
| Number of LEDs | 100 |
| Length | 10 meters |
| Power Source | USB Powered (5V DC) |
| Light Color | Warm White |
| Material | Plastic, Silver Wire |
| Special Features | Dimmable, Waterproof, Remote Control, Timer Function |
| Average Life Span | 100,000 Hours |
| Power Consumption | 6 Watts |
| Color Temperature | 2850 Kelvin |
| Package Dimensions | 11.9 x 9.1 x 2.7 cm |
| Item Weight | 65 grams |
| Energy Efficiency Class | G |
Image: Energy label for the BXROIU ES-LCL-10M string lights, indicating an energy efficiency class of G.
For more detailed product information, refer to the EPREL database: https://eprel.ec.europa.eu/qr/2153213
Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Retain your proof of purchase for any warranty claims.
Manufacturer: BXROIU
