SUNVIE 12W LED Landscape Lights User Manual

Introduction

Thank you for choosing SUNVIE 12W LED Landscape Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new landscape lighting system. These 12W COB LED lights are designed to provide super warm white illumination (900 lumens per light) for your patio, garden, pathway, backyard, fences, walls, trees, and flags, enhancing both security and aesthetic appeal.

Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• This product operates on AC/DC 12V low voltage. A compatible low voltage transformer is required and not included. Do not connect directly to 110V/220V AC power.
• All wiring should comply with local electrical codes.
• Do not submerge the lights in water. While waterproof, they are designed for outdoor landscape use with proper drainage.
• Keep children and pets away from the installation area during setup.

Package Contents

Your SUNVIE 12W LED Landscape Lights package includes the following items:

• 8 x 12W LED Landscape Lights
• 8 x Spike Stands
• 1 x User Manual

Note: A low voltage transformer, wire connectors, and low voltage wires are required for installation and are NOT INCLUDED in this pack.

Setup and Installation

Follow these steps to set up your SUNVIE landscape lights:

1. Assemble the Lights: Each light comes with a spike stand. Attach the light fixture to the spike stand using the provided screw and Allen wrench. The light head is 270-degree adjustable, allowing you to direct the light as needed.
2. Lay Out the Lights: Plan the desired placement of your lights in your garden, pathway, or other outdoor areas. Ensure the low voltage cable can reach all lights from the transformer.
3. Install the Low Voltage Transformer: Connect your low voltage transformer (not included) to a standard 110V AC outlet. Ensure the transformer is rated for the total wattage of your lights.
4. Connect the Lights: Use T-wire connectors (not included) and insulation tape (not included) to splice the light wires to the main low voltage cable. Strip the ends of the low voltage power cable and attach the wires to the transformer's terminal screws.
5. Dig Trench for Cable: For a neat and safe installation, bury the low voltage cable in a shallow trench (typically 6-12 inches deep) to protect it from damage.
6. Insert Spike Stands: Once wiring is complete, insert the spike stands into the ground at your desired locations. Ensure they are firmly planted to prevent tipping.
7. Adjust Light Direction: Adjust the angle of each light fixture to illuminate specific features like walls, trees, or flags.

Figure 1: Installation Diagram. Note that the transformer, wire connectors, and low voltage wires are sold separately.

Figure 2: Detailed view of the LED landscape light components, highlighting the durable aluminum body and waterproof features.

Figure 3: Lights installed in a garden, showcasing their aluminum structure and operational specifications.

Operating Instructions

Once properly installed and connected to a compatible low voltage transformer, your SUNVIE LED Landscape Lights will operate automatically based on your transformer's settings (e.g., dusk-to-dawn, timer). Ensure the transformer is powered on for the lights to function.

The lights provide a super warm white light (900LM) suitable for various outdoor applications. The 90° beam angle and 270-degree adjustable head allow for precise illumination of desired areas.

Figure 4: Examples of installed lights illuminating various outdoor spaces.

Maintenance

To ensure the longevity and optimal performance of your SUNVIE LED Landscape Lights, consider the following maintenance tips:

• Cleaning: Periodically wipe down the light fixtures with a soft, damp cloth to remove dirt, dust, and debris. Avoid abrasive cleaners that could damage the finish or lens.
• Inspection: Regularly inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure all connections remain secure.
• Drainage: Ensure the area around the lights has proper drainage to prevent standing water, even though the lights feature IP65 waterproof design.
• Adjustments: Re-adjust the light direction as needed to accommodate changes in landscaping or desired illumination.

Figure 5: The lights are designed with triple water resistance and a thick aluminum body and glass lens cover to withstand various weather conditions.

Troubleshooting

If you encounter issues with your SUNVIE LED Landscape Lights, refer to the following common troubleshooting steps:

• Lights Not Turning On:
  • Check if the low voltage transformer is plugged in and receiving power.
  • Verify that the transformer's timer or dusk-to-dawn sensor is set correctly.
  • Inspect all wire connections for looseness or corrosion. Ensure proper contact between the light wires and the main low voltage cable.
  • Confirm that the low voltage cable is not cut or damaged.
• Lights Are Dim or Flickering:
  • Ensure the transformer is providing sufficient voltage (12V AC/DC). Insufficient voltage can cause dimming or flickering.
  • Check for loose connections or damaged wiring, which can lead to voltage drops.
  • Verify that the total wattage of connected lights does not exceed the transformer's capacity.
• Water Inside Light Fixture:
  • While designed to be waterproof (IP65), extreme conditions or improper installation can sometimes lead to water ingress. Ensure the glass lens is securely fastened and the rubber ring seal is intact.
  • If water is present, disconnect power, allow the light to dry thoroughly, and re-seal if possible. If the issue persists, contact customer support.

Specifications

Figure 6: Key features and specifications of the SUNVIE LED Landscape Light.

Warranty Information

Specific warranty details for SUNVIE 12W LED Landscape Lights are typically provided at the point of purchase or within the product packaging. For comprehensive warranty information, including terms, conditions, and duration, please refer to the documentation included with your product or contact SUNVIE customer support directly.

Customer Support

For any questions, technical assistance, or support regarding your SUNVIE 12W LED Landscape Lights, please contact SUNVIE customer support. Our professional team is available to provide timely and effective assistance.

Please visit the official SUNVIE store or website for contact information and additional resources.

Online Store: SUNVIE Official Store on Amazon