1. Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of the Comunello FAST200 500N electric rod actuator. This device is designed for automated opening and closing of louvered blades and various types of outward opening windows. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Comunello FAST200 actuator is engineered for reliability and complies with relevant CE directives (EMC, LVD, and R&TTE).
Image 1.1: Comunello FAST200 rod actuator installed on an outward opening window. This image shows the Comunello FAST200 rod actuator mounted on the frame of an outward opening window, demonstrating its typical installation and function. The actuator is silver-colored and extends to push the window open.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Installation and electrical connections must be performed by qualified personnel in accordance with local regulations and standards.
- Disconnect power before performing any installation, maintenance, or troubleshooting.
- Do not operate the actuator if any part is damaged or if it is not securely mounted.
- Keep hands and loose clothing clear of moving parts during operation.
- Ensure the window or louver system is free of obstructions before operation.
- This device is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Verify that all components are present in the package:
- Comunello FAST200 Rod Actuator with electrical cable
- Mounting bracket and adjustable screws
- Window/coupler bracket
- Projecting bracket
- Multi-language instruction manual (this document)
Image 3.1: Comunello FAST200 actuator and accessories in its packaging. The Comunello FAST200 actuator, along with its power cable and various mounting accessories, neatly packed within its cardboard box, ready for shipment or installation.
4. Specifications
| Feature | Specification |
|---|---|
| Model | FAST200 |
| Thrust and Tension Force | 500 N |
| Voltage | 230 V AC 50 Hz |
| Stroke | 200 mm |
| Parallel Connection | Up to 30 actuators |
| Dimensions (Packaging) | 44.79 x 8.7 x 8.6 cm |
| Weight | 2.04 kg |
| Part Number | MFAST200H0B00 |
5. Installation
Follow these steps for proper installation of the Comunello FAST200 actuator.
5.1. Actuator Choice and Force Calculation
Before installation, it is crucial to select the appropriate actuator type and calculate the necessary force (F) to support the window's movement. This calculation depends on the window's weight (P), opening stroke (C), window height (H), and frame dimension (L).
Image 5.1: Diagram for calculating actuator force for window movement. This diagram illustrates how to calculate the necessary force (F) for the actuator based on window weight (P), opening stroke (C), window height (H), and frame dimension (L). It provides formulas for different window types.
5.2. Mounting the Actuator
The actuator comes with a quick-coupling system and adjustable rail mounting for easy and fast attachment. Use the provided mounting brackets and hardware to secure the actuator to the window frame or louver system.
- Identify the optimal mounting position on your window or louver system, ensuring the actuator's stroke matches the required opening distance.
- Attach the main mounting bracket to the window frame using appropriate fasteners.
- Secure the window/coupler bracket to the moving part of the window or louver.
- Connect the actuator to both brackets, ensuring it is level and aligned for smooth operation.
- Adjust the mounting as needed using the adjustable screws to achieve optimal alignment and movement.
Image 5.2: Mounting brackets and hardware for Comunello FAST200 actuator. This image presents the various mounting brackets, screws, and nuts included with the Comunello FAST200 actuator, essential for securing the device to the window frame or louver system.
5.3. Electrical Connection
Ensure the power supply is disconnected before making any electrical connections.
- Connect the actuator's electrical cable to a 230V AC 50 Hz power supply.
- Follow the wiring diagram carefully: Brown (FI), Blue (N), Black (FA), and Earth.
- If connecting multiple actuators in parallel (up to 30 units), ensure proper wiring to avoid overloading the circuit.
- Once connections are complete, secure all wiring and ensure no bare wires are exposed.
Image 5.3: Electrical wiring diagram for Comunello FAST200 actuator (230V AC). This image displays the 230V AC wiring diagram for the Comunello FAST200 actuator. It shows connections for Brown (FI), Blue (N), Black (FA), and Earth wires, along with a schematic representation of the actuator connected to a window and power supply.
5.4. Application Examples
The FAST200 actuator is suitable for various applications, including top-hung outward opening windows and solar shading louvered blades. Refer to the diagrams for typical installation configurations and dimensions.
Image 5.4: Technical drawings and application examples for Comunello FAST 50 actuator. This image shows technical drawings and application examples for the FAST 50 series, including top-hung outward opening windows and solar shading louvered blades. It provides dimensions and installation configurations.
6. Operation
Once installed and connected, the Comunello FAST200 actuator can be operated via a compatible control system (not included). The actuator extends or retracts its rod to open or close the window or louver.
- Ensure the path of the window or louver is clear before initiating movement.
- The actuator features a 200mm stroke, providing a controlled opening distance.
- For systems with multiple windows, up to 30 actuators can be operated in parallel from a single control unit.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Comunello FAST200 actuator.
- Cleaning: Periodically clean the actuator body and rod with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Inspection: Annually inspect all mounting points and electrical connections for tightness and signs of wear or damage.
- Lubrication: The actuator is designed for minimal maintenance. Do not attempt to lubricate internal components unless specifically instructed by Comunello support.
- Obstructions: Ensure the window or louver mechanism remains free of debris or obstructions that could impede actuator movement.
8. Troubleshooting
If you encounter issues with your Comunello FAST200 actuator, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Actuator does not move | No power supply Loose electrical connection Obstruction in window path | Check power source and circuit breaker Verify all electrical connections are secure Remove any obstructions |
| Actuator moves slowly or with difficulty | Friction in window mechanism Incorrect mounting alignment Actuator overloaded | Inspect window hinges/tracks for smooth movement Re-check mounting for proper alignment Ensure window weight is within actuator's 500N capacity |
| Unusual noise during operation | Loose mounting Internal mechanical issue | Tighten all mounting screws Contact Comunello support if noise persists |
If the problem persists after attempting these solutions, please contact Comunello customer support.
9. Warranty and Support
The Comunello FAST200 actuator is covered by the manufacturer's standard warranty. Please refer to your purchase documentation or the Comunello website for specific warranty terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Comunello customer support through their official channels. When contacting support, please have your product model (FAST200) and part number (MFAST200H0B00) available.
Image 9.1: Comunello brand logo. The official logo of Comunello, the manufacturer of the FAST200 actuator.
