KingGo Electronics T9 Metal Touch Keypad Access Control System User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the KingGo Electronics T9 Metal Touch Keypad Access Control System. This device is designed for secure access management, offering multiple entry methods including card, password, and a combination of both. Its robust metal construction and waterproof touch panel make it suitable for various environments.

Figure 1: Front view of the T9 Keypad Access Control System.

2. Product Features

• Functions as a standalone access controller or a card reader.
• Equipped with a waterproof touch panel and integrated doorbell button.
• Durable metal case with backlight for enhanced visibility.
• Supports multiple access modes: Card Only, Password Only, and Card + Password.
• Full programming capabilities directly from the keypad.
• Features a humanized tamper alarm function for security.
• Ability to set up a dedicated management card for administrative tasks.
• Provides active and passive lock signal output.
• Utilizes contactless RFID transponder technology (125kHz EM/ID card compatible).
• Includes a connection point for an external release (exit) button.
• Memory capacity for up to 1000 user cards and 1 password.
• Operates independently without requiring a computer connection.

3. Technical Specifications

Figure 2: Angled view of the T9 Keypad, showing its side profile.

4. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

• 1 x KingGo Electronics T9 Door Access Control Keypad
• 1 x English User Manual (this document)

5. Setup and Installation

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended that installation be performed by a qualified technician.

5.1. Mounting Location

Choose a secure and accessible location for mounting the keypad. While the touch panel is waterproof, ensure the overall unit is protected from direct, prolonged exposure to extreme weather conditions if installed outdoors. Mount at a height convenient for all users.

5.2. Wiring Connections

The T9 keypad requires a DC12V power supply. Connect the power input terminals to a stable DC12V source. Connect the unlock relay output to your electric lock mechanism. Ensure correct polarity for all connections.

• Power Input: Connect to DC12V power supply.
• Lock Output: Connect to the electric lock (supports active and passive lock signals).
• Exit Button: Connect an external release button (normally open contact) to the designated terminals for easy egress.
• Doorbell: If utilizing the doorbell function, connect to an external doorbell chime.

Note: Refer to the wiring diagram provided with your specific lock and power supply for detailed connection instructions. Incorrect wiring can damage the device or connected components.

6. Operation

The T9 keypad allows for full programming directly from the unit. Below are general operational guidelines.

6.1. Initial Setup and Master Password

Upon first power-up, the system will be in a default state. It is highly recommended to immediately set a master password or register a management card for administrative access.

6.2. Adding Users (Cards/Passwords)

To add new users, enter the programming mode using your master password or management card. Follow the on-screen prompts or specific key sequences (refer to the quick start guide if provided) to register new RFID cards or assign user passwords. The system supports up to 1000 user cards and 1 password.

6.3. Deleting Users

To remove access for a user, enter programming mode and follow the instructions to delete specific user cards or passwords.

6.4. Accessing the Door

• Card Only: Present a registered EM/ID card to the reader area on the keypad.
• Password Only: Enter your registered password on the keypad, followed by the '#' key (or designated enter key).
• Card + Password: Present your registered card, then enter your associated password followed by the '#' key.

Upon successful authentication, the lock will momentarily disengage, allowing entry.

6.5. Tamper Alarm

The system features a tamper alarm. If the unit detects unauthorized removal or tampering, an audible alarm will sound. Refer to the programming instructions to disarm or reset the alarm.

7. Maintenance

Regular maintenance ensures the longevity and reliable operation of your T9 access control system.

• Cleaning: Use a soft, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents that could damage the finish or touch panel.
• Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
• Functionality Test: Regularly test the keypad's functionality, including card reading, password entry, and the exit button, to ensure proper operation.

8. Troubleshooting

If you encounter issues with your T9 access control system, refer to the following common problems and solutions:

• Keypad is unresponsive / No power:
  • Check the DC12V power supply connection.
  • Ensure the power adapter is functioning correctly.
  • Verify all wiring connections are secure and correct.
• Card not reading:
  • Ensure the card is an EM/ID 125kHz type.
  • Verify the card is properly registered in the system.
  • Present the card within the induction distance (1-5cm) of the reader.
• Password not working:
  • Confirm the password entered is correct and registered.
  • Ensure the '#' key (or designated enter key) is pressed after the password.
• Door does not unlock:
  • Check the connection between the keypad's unlock relay and the electric lock.
  • Verify the electric lock itself is functioning correctly.
  • Ensure the power supply is sufficient for both the keypad and the lock.
• Tamper alarm sounds unexpectedly:
  • Check for any loose mounting or physical disturbance to the unit.
  • Refer to programming instructions to reset or adjust tamper sensitivity if applicable.

If the problem persists after attempting these solutions, please contact KingGo Electronics customer support or your installer for further assistance.

9. Warranty and Support

For information regarding the warranty period and terms for your KingGo Electronics T9 Metal Touch Keypad Access Control System, please refer to the warranty card included with your purchase or contact the retailer/seller directly. Specific warranty details are subject to regional regulations and seller policies.

For technical support or service inquiries, please reach out to KingGo Electronics customer service through their official website or the contact information provided by your point of purchase.