Funko Pop! Marvel #350 Classic Ant-man (2018 Summer Convention Exclusive) Instruction Manual

Introduction

This manual provides essential information for the care and display of your Funko Pop! Marvel #350 Classic Ant-man collectible figure. This figure is a special 2018 Summer Convention Exclusive, designed for display and collection.

Setup and Display

Follow these steps to properly unbox and display your Funko Pop! figure:

1. Unboxing: Carefully remove the figure from its packaging. Retain the original box for future storage or display, especially for collectible items.
2. Placement: Place the figure on a flat, stable surface. Ensure it is away from direct sunlight, extreme temperatures, and high humidity to prevent damage or discoloration.
3. Stability: The figure is designed to stand independently. If stability is an issue, ensure the base is clean and free of debris.

The Funko Pop! Classic Ant-man figure displayed within its original box, highlighting the '2018 Summer Convention Limited Edition' sticker.

Front view of the Funko Pop! Classic Ant-man figure, showcasing its iconic helmet and suit.

Operating the Bobble-Head Feature

Your Funko Pop! figure features a characteristic bobble-head design. To activate the bobble feature:

• Gently tap the head of the figure. The spring mechanism will allow the head to bobble.
• Avoid excessive force or twisting, as this may damage the spring or the figure's neck joint.

Maintenance and Care

Proper care will help preserve the condition of your collectible figure:

• Cleaning: Dust the figure regularly with a soft, dry cloth or a soft-bristled brush. Do not use abrasive cleaners or harsh chemicals, as these can damage the paint finish.
• Storage: If storing the figure, use its original packaging or a protective display case to prevent dust accumulation and physical damage.
• Environment: Keep the figure away from direct sunlight, high humidity, and extreme temperature fluctuations to prevent fading, warping, or paint degradation.

Side profile of the Funko Pop! Classic Ant-man figure, showing the details of the helmet and suit from a different angle.

Troubleshooting

While Funko Pop! figures are generally robust, minor issues can occur. Here are some common concerns and advice:

• Paint Imperfections: Minor paint variations are common in mass-produced collectibles. If an imperfection is significant, refer to the warranty information.
• Loose Head/Bobble Mechanism: If the head does not bobble correctly, gently check the spring connection. Avoid attempting to repair complex internal mechanisms yourself.
• Damaged Parts: If any part of the figure is broken upon arrival, contact the retailer or manufacturer immediately. Do not attempt to glue or repair delicate parts unless you are experienced in model repair, as this may void any warranty.

Close-up of the '2018 Summer Convention Limited Edition' sticker, indicating the figure's exclusive status.

Specifications

Warranty and Support

Funko Pop! figures are typically covered by a limited manufacturer's warranty against defects in materials and workmanship. For specific warranty details or to report an issue, please contact Funko customer support directly or the retailer from whom you purchased the item.

Manufacturer: Funko

For further assistance, visit the official Funko website or contact their customer service department.