1. Product Overview
The Dahua PFS3006-4ET-60 is a 10/100M 6-port Power over Ethernet (PoE) desktop switch designed for expanding home or office networks, particularly suitable for IP video surveillance systems. It features four PoE-enabled ports, providing power and data transmission over a single Ethernet cable, ensuring reliable and high-quality transmission.
Figure 1: Front view of the Dahua PFS3006-4ET-60 PoE Switch, showing the six RJ45 ports (PoE1-PoE4, Uplink 1, Uplink 2) and associated LED indicators for Link/Act, Speed, and PoE, along with the PWR indicator.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the device or injury to yourself.
- Ensure the power supply voltage matches the device's requirements (48V DC).
- Do not expose the device to water, moisture, or extreme temperatures.
- Place the switch in a well-ventilated area to prevent overheating.
- Avoid placing heavy objects on the switch.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- Use only the power adapter provided or recommended by the manufacturer.
3. Package Contents
Verify that all items are present in the package:
- Dahua PFS3006-4ET-60 6-Port PoE Switch
- Power Adapter (48V DC / 1.25A)
- User Manual (this document)
4. Setup
4.1 Physical Installation
- Placement: Place the switch on a stable, flat surface, such as a desktop. Ensure adequate space around the device for ventilation.
- Power Connection: Connect the provided 48V DC power adapter to the power input port on the switch and then plug the adapter into a standard electrical outlet.
Figure 2: Rear view of the Dahua PFS3006-4ET-60 PoE Switch, showing the DC power input port.
4.2 Connecting Devices
- PoE Devices: Connect your PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points) to ports PoE1 through PoE4 using standard Ethernet cables (UTP cat. 5e or 6). These ports will provide both data and power. Note that PoE1 supports Hi-PoE.
- Uplink Ports: Connect the switch to your router, NVR, or main network using the Uplink 1 or Uplink 2 ports. These are standard 10/100 Base-T RJ45 ports for network connectivity.
5. Operating
5.1 LED Indicators
The switch features several LED indicators to provide status information:
| LED Indicator | Status | Description |
|---|---|---|
| PWR | On | The switch is powered on. |
| Link/Act (per port) | On | A device is connected to the port. |
| Flashing | Data is being transmitted or received through the port. | |
| Speed (per port) | On | Indicates 100 Mb/s connection speed. (If off, typically 10 Mb/s) |
| PoE (PoE ports) | On | Power is being supplied to the connected PoE device. |
| Flashing | PoE fault or overload. |
5.2 Operation Modes (Extend Switch)
The switch features an 'Extend' mode switch, typically located on the side or front panel, which alters the transmission distance and speed:
- Extend On: In this mode, the transmission distance for PoE ports is extended up to 250 meters (820 feet) at a speed of 10 Mb/s. This mode is ideal for long-distance IP camera deployments using UTP cat. 5e or 6 cables.
- Extend Off: This is the standard mode, where transmission distance is up to 100 meters (328 feet) at a speed of 100 Mb/s. This mode is suitable for typical network setups.
6. Maintenance
To ensure optimal performance and longevity of your Dahua PoE switch, consider the following maintenance tips:
- Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure that the ventilation openings are not blocked and remain free of dust.
- Firmware Updates: Check the Dahua official website for any available firmware updates. Keeping the firmware up-to-date can improve performance and security.
- Power Cycle: If the switch is experiencing minor issues, try power cycling it (unplugging the power adapter, waiting 10 seconds, and plugging it back in).
7. Troubleshooting
If you encounter issues with your switch, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power (PWR LED off) | Power adapter not connected or faulty; power outlet issue. | Check power adapter connection. Try a different power outlet. Ensure the adapter is functional. |
| Device not connecting (Link/Act LED off) | Incorrect cable; faulty cable; device not powered on or faulty. | Ensure the Ethernet cable is properly connected at both ends. Try a different cable. Verify the connected device is powered on and functioning. |
| No PoE power to device (PoE LED off) | Device not PoE compatible; cable issue; total power budget exceeded. | Verify the device is PoE compatible (IEEE 802.3af/at). Check the Ethernet cable. Ensure the total power consumption of all connected PoE devices does not exceed 60W. |
| Slow network speed | Cable quality; Extend mode enabled; network congestion. | Use UTP cat. 5e or 6 cables. If not requiring long distance, ensure 'Extend' mode is set to 'Off'. Check for other network bottlenecks. |
8. Specifications
Detailed technical specifications for the Dahua PFS3006-4ET-60 PoE Switch:
| Feature | Description |
|---|---|
| Model | PFS3006-4ET-60 |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| Protocols | CSMA/CD |
| LAN Ports | 2 x RJ45 100 Base-T (Uplink), 4 x 10/100 Base-T (1 x Hi-PoE + 3 x PoE) |
| Transmission Method | Store and Forward |
| LED Indicators | Power, Speed, PoE, Link/Act |
| Transmission Speed | 10 / 100 Mb/s |
| Maximal Total PoE Power | 60 W |
| MAC Address Table | 2K (Auto update) |
| Operation Modes | Extend On (250m, 10 Mb/s), Extend Off (100m, 100 Mb/s) |
| Certificates | CE |
| Power Supply | 48 V DC / 1.25 A |
| Weight | 0.28 kg (0.62 lbs) |
| Dimensions (L x W x H) | 130 x 85 x 26 mm (5.12 x 3.35 x 1.02 inches) |
| Case Material | Plastic |
| Compatible Devices | Desktop |
| UPC | 702188349840 |
9. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Dahua website.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized Dahua dealer or the customer support channels listed on the official Dahua website. When contacting support, please have your product model number (PFS3006-4ET-60) and UPC (702188349840) ready.