Introduction
Thank you for choosing the Amplify Pro Cadence Series Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
Image: Amplify Pro Cadence Series Bluetooth Speaker. This image displays the speaker's cylindrical design, black finish with a subtle pattern, and the prominent Amplify logo on its side.
Package Contents
Ensure all items listed below are present in your package:
- Amplify Cadence Series Bluetooth Speaker
- Instruction Manual
- 2-in-1 USB & AUX Cable
Image: Package Contents. This image shows the Amplify Cadence Series Bluetooth Speaker, its instruction manual, and a 2-in-1 USB and AUX cable, all neatly arranged with the product packaging.
Setup
1. Charging the Speaker
- Connect the small end of the provided 2-in-1 USB cable to the charging port on the speaker.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate, typically red, to show the device is charging.
- Once fully charged, the indicator light may change color or turn off. A full charge provides approximately 20 hours of playing time.
2. Powering On/Off
- To power on, press and hold the power button for a few seconds until you hear an audible prompt or see an indicator light.
- To power off, press and hold the power button again until the device shuts down.
Operating the Speaker
1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash.
- On your audio device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Amplify Cadence" (or similar name) from the list of found devices.
- Once paired, the speaker will emit a confirmation sound, and the Bluetooth indicator light will become solid.
- The speaker should automatically reconnect to the last paired device when powered on, if the device is within range and Bluetooth is enabled.
2. AUX Input
- Connect one end of the 2-in-1 USB & AUX cable's 3.5mm jack to the AUX input port on the speaker.
- Connect the other 3.5mm end to the headphone jack of your audio device.
- The speaker will automatically switch to AUX mode.
3. Basic Controls
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Play/Pause: Press the 'Play/Pause' button.
- Next Track: Press and hold the '+' button (or a dedicated 'Next' button if available).
- Previous Track: Press and hold the '-' button (or a dedicated 'Previous' button if available).
Maintenance
- Keep the speaker away from water, moisture, and extreme temperatures.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid dropping the speaker or subjecting it to strong impacts.
- When not in use for extended periods, store the speaker in a cool, dry place and charge it periodically to maintain battery health.
Troubleshooting
| Problem | Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the provided USB cable. |
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Pro Cadence |
| Brand | Amplify |
| Connectivity Technology | Bluetooth |
| Special Feature | Portable |
| Speaker Maximum Output Power | 5 Watts |
| Frequency Response | 16000 KHz |
| Audio Output Mode | Stereo |
| Input Voltage | 5 Volts |
| Mounting Type | Tabletop Mount |
| Material | Plastic |
| Package Dimensions | 24.64 x 14.48 x 12.45 cm |
| Weight | 460 g |
Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please visit the official Amplify website or contact their customer service department.
Website: www.amplify.africa
