ZYREV QK-47MI-M6DH

ZYREV Otoscope Ophthalmoscope Diagnostic Set User Manual

Model: QK-47MI-M6DH

Introduction

This manual provides detailed instructions for the safe and effective use of your ZYREV Otoscope Ophthalmoscope Diagnostic Set. This 36-piece kit is designed for comprehensive diagnostic examinations of the ear, eye, nose, and throat, suitable for medical students and professionals. Please read this manual thoroughly before operating the device and retain it for future reference.

Safety Information

Always follow basic safety precautions when using medical diagnostic equipment.

Package Contents

Verify that all items listed below are present in your diagnostic kit.

Image showing all components included in the Zyrev Diagnostic Set

Figure 1: Overview of the ZYREV Diagnostic Set components.

Image of the diagnostic set neatly organized within its leather carrying case

Figure 2: Diagnostic set organized in its protective leather case.

Setup

1. Battery Installation

The handle requires two C-size batteries (not included).

  1. Unscrew the bottom cap of the handle.
  2. Insert two C-size batteries, ensuring correct polarity (+/-).
  3. Screw the bottom cap back on securely.

2. Attaching the Otoscope/Ophthalmoscope Head

The otoscope and ophthalmoscope heads attach to the handle using a bayonet locking system.

  1. Align the head with the handle.
  2. Push down gently and twist clockwise until it locks into place.
  3. To remove, push down and twist counter-clockwise.

Operating Instructions

Otoscope Operation

Close-up image detailing the features of the otoscope head, including 3X magnification, LED illumination, bayonet locking system, and metal base.

Figure 3: Otoscope head features.

  1. Attach the otoscope head to the handle.
  2. Select an appropriate size reusable or disposable ear speculum and attach it to the otoscope head.
  3. Turn on the light by rotating the switch on the handle.
  4. Gently insert the speculum into the ear canal to visualize the tympanic membrane. The otoscope provides 3X magnification.

Ophthalmoscope Operation

Close-up image detailing the features of the ophthalmoscope head, including high quality visor, heavy duty plastic, light mode indicator, and premium lens correction knob.

Figure 4: Ophthalmoscope head features.

  1. Attach the ophthalmoscope head to the handle.
  2. Turn on the light.
  3. Adjust the lens correction knob to focus on the patient's retina.
  4. Position the ophthalmoscope approximately 15 cm from the patient's eye and direct the light beam into the pupil.

Using the Nasal Adapter

Image showing a medical professional using the nasal adapter with the diagnostic handle to examine a patient's nose.

Figure 5: Nasal examination using the adapter.

The nasal adapter can be attached to the handle for examining the nasal cavity. Ensure the light is on for proper visualization.

Using the Tongue Depressor and Illuminator

Image showing a medical professional using the illuminator and tongue depressor to inspect a child's oral cavity and oropharynx.

Figure 6: Oral cavity inspection.

Attach the illuminator to the handle. Use the tongue depressor to gently hold down the patient's tongue while using the illuminator to light up the oral cavity and oropharynx for examination.

Maintenance and Care

Cleaning

Storage

Store the diagnostic set in its protective leather case in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period.

Bulb Replacement

If the light dims or fails, replace the bulb with one of the provided replacement bulbs. Refer to the specific head (otoscope or ophthalmoscope) for bulb access.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Dead or incorrectly inserted batteries.Check battery polarity, replace batteries.
Light is dim.Low batteries or faulty bulb.Replace batteries or bulb.
Difficulty attaching/detaching heads.Incorrect alignment or debris.Ensure proper alignment, clean connection points.
Blurred vision through otoscope/ophthalmoscope.Dirty lens or incorrect focus.Clean the lens, adjust the focus knob (ophthalmoscope).

Specifications

Warranty and Support

ZYREV stands by the quality of its products. If you encounter any issues with your diagnostic set, please contact our customer support for assistance. We are committed to providing a refund or replacement kit for any product defects or dissatisfaction.

For support, please refer to the contact information provided with your purchase or visit the official ZYREV website.

Related Documents - QK-47MI-M6DH

Preview QUIKO QK-CE220CTD Control Unit: Installation and Operation Manual
Comprehensive installation and operation guide for the QUIKO QK-CE220CTD control unit, detailing setup, programming, connections, and troubleshooting for automatic bollard systems.
Preview Quiko MOOVY Sliding Gate Automation: Use and Maintenance Manual
This manual provides detailed instructions for the installation, operation, and maintenance of Quiko MOOVY sliding gate automation systems. It covers technical specifications for various models, step-by-step installation procedures, essential safety guidelines, and declarations of conformity. Suitable for QK-M300B, QK-M800BFX, QK-M1000B, QK-M800, QK-M1200, QK-M1500, and QK-M2000 models.
Preview FISNAR DC200 Digital Dispenser: Operating Manual, Features, and Setup Guide
Comprehensive operating manual for the FISNAR DC200 Digital Dispenser. Covers setup, operation, dispense modes, function menu, calibration, I/O connections, and spare parts. Learn how to use the DC200 for precise fluid dispensing applications.
Preview Quark-elec QK-A032: NMEA 2000/0183 Bi-directional Converter Manual
User manual for the Quark-elec QK-A032, a bi-directional NMEA 2000/0183 converter with USB and WiFi connectivity for marine navigation systems. Details setup, configuration, and specifications.
Preview Quark-Elec QK-A024/26 Manual: Wireless AIS + GPS Receiver with NMEA Multiplexer + WiFi
This manual provides comprehensive information on the Quark-Elec QK-A024/26 Wireless AIS + GPS Receiver, including features, installation, connections, configuration, and software setup for marine navigation.
Preview Quark-elec QK-AS07-N2K NMEA 2000 GPS & Heading Sensor Setup Guide
Comprehensive setup guide for the Quark-elec QK-AS07-N2K NMEA 2000 GPS and Heading Sensor. Covers installation, mounting, NMEA 2000 connectivity, and optional configuration with the AS07-C switch for NMEA 0183 compatibility and data tuning.