Okano 902

Okano Silicone Spray 902 Concentrated Type 420ml

Instruction Manual

1. Introduction

The Okano Silicone Spray 902 Concentrated Type is a high-performance lubricant designed to enhance the smooth operation of various tools and machinery. Its advanced formula ensures long-lasting effectiveness without leaving a sticky residue, making it ideal for applications requiring low friction and clean surfaces.

This manual provides essential information on the safe and effective use, maintenance, and specifications of your Okano Silicone Spray 902.

2. Safety Information

Please read and understand all safety warnings before using this product. Failure to follow these instructions may result in injury or damage.

  • Flammability: This product is highly flammable. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
  • Ventilation: Use only in a well-ventilated area. Avoid breathing spray mist.
  • Eye Contact: Avoid contact with eyes. In case of contact, rinse immediately with plenty of water and seek medical advice.
  • Skin Contact: Avoid prolonged or repeated skin contact. Wash hands thoroughly after handling.
  • Ingestion: Do not ingest. If swallowed, do not induce vomiting. Call a poison control center or doctor immediately.
  • Pressure Container: Pressurized container: May burst if heated. Do not pierce or burn, even after use.
  • Storage: Protect from sunlight. Do not expose to temperatures exceeding 50°C (122°F). Keep out of reach of children and pets.

3. Product Features

The Okano Silicone Spray 902 offers several key features designed for superior performance:

  • High-Concentration Formula: Provides enhanced lubrication and protection with a smaller application amount.
  • Non-Sticky: Dries quickly without leaving a greasy or sticky residue, ensuring clean operation.
  • Long-Lasting Effect: Engineered for durability, maintaining its lubricating properties over extended periods.
  • Versatile Application: Ideal for improving the sliding motion of woodworking machinery, electric tools, and various types of blades.

4. Usage Instructions

4.1. Setup

  1. Ensure the work area is well-ventilated.
  2. Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
  3. Shake the can thoroughly for at least 30 seconds before use to ensure proper mixing of contents.

4.2. Operating

  1. Hold the can upright, approximately 15-20 cm (6-8 inches) from the surface to be treated.
  2. Apply a thin, even coat of the spray to the desired surface. For best results, apply in short bursts rather than a continuous spray.
  3. Allow the spray to dry completely before operating machinery or tools. This typically takes a few minutes.
  4. For hard-to-reach areas, use the included straw applicator (if provided) by inserting it into the nozzle.
Okano Silicone Spray 902 Concentrated Type 420ml can

An image showing the Okano Silicone Spray 902 Concentrated Type 420ml in a white and blue aerosol can. The label clearly indicates '902 SILICON SPRAY' and '高濃度特殊シリコーン' (High-Concentration Special Silicone).

5. Maintenance and Storage

5.1. Maintenance

  • Regularly inspect treated surfaces for optimal lubrication. Reapply as needed based on usage frequency and environmental conditions.
  • Clean any overspray immediately with a suitable solvent if necessary, though the non-sticky formula minimizes this need.

5.2. Storage

  • Store the can in a cool, dry place, away from direct sunlight and temperatures above 50°C (122°F).
  • Keep the cap securely on the can when not in use to prevent accidental discharge and contamination.
  • Store away from ignition sources and out of reach of children and animals.

6. Troubleshooting

If you encounter issues with your Okano Silicone Spray 902, refer to the following common troubleshooting tips:

Problem Possible Cause Solution
Spray not dispensing or weak spray Clogged nozzle; low pressure; can too cold Clean nozzle with a pin; shake can vigorously; warm can to room temperature (do not heat directly).
Surface remains sticky after application Too much product applied; insufficient drying time Apply a thinner coat; allow more time for drying in a well-ventilated area.
Effectiveness is short-lived Heavy use; abrasive environment; improper application Reapply more frequently; ensure surface is clean before application; consider environmental factors.

7. Specifications

Attribute Detail
Brand Okano
Model Number 902 (Concentrated Type)
Volume 420ml
Product Form Spray
Main Ingredient Silicone
Package Type Can
ASIN B07FDVR3HV

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact your point of purchase or refer to the official Okano website. Keep your purchase receipt as proof of purchase.

For general inquiries, you may visit the manufacturer's website or contact their customer service department. Specific warranty terms may vary by region and retailer.

© 2023 Okano. All rights reserved.

Related Documents - 902

Preview OKANO AF6043 43" Full HD Android TV Instruction Manual
User guide for the OKANO AF6043 43-inch Full HD Android TV, detailing setup, operation, safety, specifications, and troubleshooting steps.
Preview GIMA Plastic Security Seal with Steam Indicator - User Manual and Specifications
Comprehensive guide to GIMA plastic security seals featuring steam indicators. Includes usage instructions, features, technical specifications, storage guidelines, and compliance information for medical sterilization applications.
Preview YIHUA 939D+ IV ESD-Safe Soldering Station Operation Manual
Operation instructions for the YIHUA 939D+ IV ESD-Safe Soldering Station, featuring adjustable temperature control, sleep mode, and digital temperature calibration.
Preview MAUL Heated Footrest 902 Series - User and Care Guide
Instructions and care guide for the MAUL Heated Footrest, models 902 20, 902 25, and 902 50, detailing assembly, usage, and maintenance. Features ergonomic design and electrical specifications.
Preview SignalFire Sentinel Node Thermocouple Interface Manual
Comprehensive interface manual for the SignalFire Sentinel Node Thermocouple. Covers features, specifications, wiring, setup, configuration, Modbus mapping, and FCC/IC statements for industrial temperature monitoring.
Preview RUCKUS Accessory Guide: Indoor, Outdoor, Electrical, and Fiber Accessories
Comprehensive guide to RUCKUS accessories including indoor and outdoor AP mounts, power adapters, cables, and fiber optic enclosures. Find SKUs, compatible products, and kit contents for CommScope RUCKUS networking equipment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.