OMI PEMF Mini Electromagnetic Therapy Mat

1. Introduction

Thank you for choosing the OMI PEMF Mini Electromagnetic Therapy Mat. This device is designed to provide localized Pulsed Electromagnetic Field (PEMF) therapy for humans and full-body therapy for pets. PEMF therapy uses electromagnetic fields to stimulate cellular repair and improve overall well-being. Please read this manual carefully before using the device to ensure safe and effective operation.

For more information about OMI products, please visit our official website.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and injury to persons. This device is not intended to diagnose, treat, cure, or prevent any disease.

• Consult your healthcare professional before using this device, especially if you have pre-existing medical conditions, are pregnant, or have implanted electronic devices (e.g., pacemakers, defibrillators).
• Do not use the device near water or in excessively humid environments.
• Keep the device away from heat sources and direct sunlight.
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Use only the provided DC adapter. Using an incompatible power supply may damage the device and void the warranty.
• Keep out of reach of children and pets when not in use.
• If you experience any discomfort or adverse reactions during use, discontinue use immediately and consult a healthcare professional.

3. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support immediately.

• 1 x OMI PEMF Mini Mat (60 cm x 40 cm)
• 1 x Control Unit
• 1 x DC Power Adapter
• 1 x User Manual (this document)

Image 1: OMI PEMF Mini Mat with its control unit and power cable.

4. Setup

Follow these steps to set up your OMI PEMF Mini Mat:

1. Unpack: Carefully remove all components from the packaging.
2. Connect Control Unit: Locate the connector cable extending from the mat. Plug this cable securely into the designated port on the control unit. Ensure a firm connection.
3. Connect Power Adapter: Plug the DC power adapter into the power input port on the control unit.
4. Plug into Outlet: Insert the power adapter's plug into a standard electrical wall outlet.
5. Placement: Place the OMI PEMF Mini Mat on a flat, stable surface where you intend to use it. For localized human therapy, place it on a chair, bed, or floor. For pet therapy, ensure it is in a comfortable and safe area for your pet.

Image 2: OMI PEMF Mini Mat shown in a slightly folded position, highlighting its compact nature and the attached control unit.

5. Operating Instructions

The OMI PEMF Mini Mat is designed for ease of use. Familiarize yourself with the control unit buttons before starting a session.

5.1 Control Unit Overview

The control unit features a display and several buttons for adjusting settings.

• Power Button: Turns the device ON/OFF.
• Frequency Adjustment Buttons (+/-): Increases or decreases the PEMF frequency.
• Program/Mode Button: Selects different pre-set programs or modes (if available).
• Timer Button: Adjusts the session duration.

5.2 Starting a Session

1. Power On: Press the Power button on the control unit. The display will illuminate.
2. Select Frequency: Use the Frequency Adjustment buttons (+/-) to set your desired frequency. The mat supports frequencies from 1 Hz to 99 Hz. Start with lower frequencies and gradually increase as comfortable.
3. Set Duration: Press the Timer button to cycle through available session durations (e.g., 10, 20, 30 minutes). Select the appropriate time for your session.
4. Begin Therapy: Once settings are chosen, the therapy session will begin automatically. Position yourself or your pet on or near the mat according to your therapy needs.

5.3 Ending a Session

The device will automatically turn off once the set session duration is complete. You can also manually end a session at any time by pressing the Power button.

6. Maintenance

Proper care and maintenance will extend the life of your OMI PEMF Mini Mat.

• Cleaning: Disconnect the mat from the power source before cleaning. Wipe the surface of the mat and control unit with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or immerse the device in water.
• Storage: When not in use, store the mat in a cool, dry place, away from direct sunlight and extreme temperatures. You can gently fold the mat for compact storage.
• Inspection: Periodically inspect the mat and cables for any signs of damage. If any damage is found, discontinue use and contact customer support.

7. Troubleshooting

If you encounter any issues with your OMI PEMF Mini Mat, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact OMI customer support.

8. Specifications

9. Warranty and Support

OMI products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions, or visit the official OMI website for detailed warranty information.

For technical support, troubleshooting assistance, or warranty claims, please contact OMI customer service through the contact information provided on our official website or your purchase receipt. Please have your product model and purchase date ready when contacting support.

Website: www.omipemf.com (Example link, replace with actual if known)