WINFLIKE RMT-D197A

WINFLIKE RMT-D197A DVD Player Remote Control User Manual

For Sony DVP-SR Series DVD Players

Introduction

Thank you for choosing the WINFLIKE RMT-D197A replacement remote control. This remote is designed to be compatible with various Sony DVP-SR series DVD players, offering a direct replacement without the need for programming. Simply insert batteries, and it is ready for use.

This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your new remote control.

Compatible Models

The RMT-D197A remote control is compatible with the following Sony DVD player models:

  • DVP-SR100, DVP-SR120
  • DVP-SR201P, DVP-SR210P, DVP-SR210PB
  • DVP-SR310P, DVP-SR320
  • DVP-SR405P
  • DVP-SR510H
  • DVP-SR750HP

This remote is also compatible with models DVPSR100, DVPSR120, DVPSR201P, DVPSR210P, DVPSR210PB, DVPSR310P, DVPSR320, DVPSR405P, DVPSR510H, and DVPSR750HP.

Setup

1. Battery Installation

The remote control requires two (2) AAA batteries (not included). Follow these steps to install them:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Front and back view of the RMT-D197A remote control, showing the battery compartment on the back.

Image: Front and back view of the RMT-D197A remote control. The back view clearly shows the battery compartment.

2. Initial Use

No programming or pairing is required for this remote control. Once the batteries are correctly installed, the remote is ready to operate your compatible Sony DVD player.

Operating Instructions

Point the remote control directly at your DVD player. Ensure there are no obstructions between the remote and the DVD player's infrared sensor.

Front view of the RMT-D197A remote control, showing all buttons and their labels.

Image: Front view of the RMT-D197A remote control, displaying all functional buttons.

Button Functions Overview

  • OPEN/CLOSE: Opens or closes the disc tray.
  • TV INPUT: Switches the input source on your television (if supported by your TV and DVD player setup).
  • TV I/O (Power): Turns the television power on or off (if supported).
  • I/O (Power): Turns the DVD player power on or off.
  • VOL (+/-): Adjusts the volume level (if supported by your TV or audio system).
  • Number Buttons (0-9): For direct track selection or inputting numbers.
  • CLEAR: Clears numerical entries or selections.
  • AUDIO: Selects audio tracks or languages.
  • SUBTITLE: Toggles or selects subtitle options.
  • TIME/TEXT: Displays time information or text data.
  • MENU: Accesses the DVD menu.
  • Navigation Buttons (Up, Down, Left, Right, Enter): Navigates through menus and selections.
  • RETURN: Returns to the previous menu or screen.
  • DISPLAY: Shows on-screen display information.
  • PREV (|<): Skips to the previous track or chapter.
  • REPLAY (<<): Replays a short segment.
  • ADVANCE (>>): Advances a short segment.
  • NEXT (>|): Skips to the next track or chapter.
  • FAST/SLOW PLAY: Controls playback speed.
  • PLAY (>): Starts or resumes playback.
  • PAUSE (||): Pauses playback.
  • STOP (■): Stops playback.

Maintenance

Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

Cleaning

To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.

Troubleshooting

  • Remote is not responding:
    • Ensure the batteries are installed correctly with the correct polarity (+/-).
    • Replace old batteries with new AAA batteries.
    • Check for any obstructions between the remote control and the DVD player's infrared sensor.
    • Ensure you are pointing the remote directly at the DVD player.
  • Some buttons are not working:
    • Verify that the specific function is supported by your DVD player model. For example, some older DVD players or specific models may not fully support TV control functions (like TV Input or TV Volume) from a DVD remote.
    • Clean the remote control buttons and surface to ensure no debris is interfering with button presses.
  • Remote works intermittently:
    • This often indicates low battery power. Replace the batteries.
    • Ensure consistent line of sight to the DVD player.

Specifications

FeatureDetail
Model NumberRMT-D197A (WL-RMT-D197A)
Product Dimensions7 x 2 x 0.5 inches
Item Weight1.5 ounces
Batteries Required2 AAA batteries (not included)
Connectivity TechnologyInfrared (IR)
Special FeaturesErgonomic, Lightweight, No Programming Required
Compatible DevicesSony DVD/Blu-ray Players (DVP-SR series)

Warranty Information

Specific warranty details for the WINFLIKE RMT-D197A remote control are not provided in this manual. For information regarding warranty coverage, please contact the manufacturer or your point of purchase.

Customer Support

If you encounter any issues or have questions regarding your WINFLIKE RMT-D197A remote control that are not addressed in this manual, please contact WINFLIKE customer support. The manufacturer is committed to assisting customers with any problems they may experience.

Please refer to the packaging or the retailer's website for the most current contact information.

© 2026 WINFLIKE. All rights reserved.