1. Introduction
Thank you for choosing the AOC 24V2Q monitor. This 23.8-inch Full HD (1920 x 1080) display features an IPS panel for wide viewing angles and vibrant colors, a 75Hz refresh rate, and a rapid 5ms response time. Designed with a sleek, frameless aesthetic on three sides, it integrates seamlessly into any workspace or entertainment setup. Key features include AMD FreeSync technology for smooth gaming, and AOC's Flicker-Free and Low Blue Light technologies for enhanced eye comfort during extended use.
Figure 1: Front view of the AOC 24V2Q monitor, showcasing its slim bezels and elegant stand.
2. Setup
2.1 Package Contents
Before you begin, please verify that all items are present in the package:
- AOC 24V2Q Monitor
- Power Cable
- HDMI Cable
- DisplayPort Cable
- Monitor Stand (Base and Neck)
- Installation CD (may contain drivers and user manual)
- Warranty Card
2.2 Assembling the Stand
- Carefully place the monitor face down on a soft, clean surface to prevent scratches.
- Attach the stand neck to the back of the monitor, aligning the mounting points. Secure with screws if provided.
- Attach the stand base to the neck, ensuring it clicks into place or is secured with the designated screw.
- Gently lift the assembled monitor and place it on a stable, flat surface.
2.3 Connecting the Monitor
The AOC 24V2Q monitor supports HDMI and DisplayPort connections.
- Power Connection: Connect the power cable to the monitor's power input and then to a power outlet.
- Video Connection: Choose either an HDMI or DisplayPort cable. Connect one end to the corresponding port on the monitor and the other end to your computer's graphics card.
- Audio Output: If desired, connect headphones or external speakers to the 3.5mm audio output jack on the monitor.
3. Operating the Monitor
3.1 Power On/Off
Press the power button, usually located on the bottom right bezel or rear of the monitor, to turn the display on or off. The power indicator light will illuminate when the monitor is active.
3.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various display settings. Navigate the menu using the buttons located on the bottom bezel or rear of the monitor.
- Brightness/Contrast: Adjust the overall luminance and contrast ratio of the display.
- Color Settings: Modify color temperature, gamma, and individual RGB levels.
- Input Select: Manually switch between HDMI and DisplayPort inputs.
- Picture Mode: Select from preset display modes optimized for different content (e.g., Standard, Text, Game, Movie).
- Low Blue Light Mode: Reduce harmful blue light emissions for eye comfort.
- Clear Vision: Enhance clarity and vividness for standard definition content.
- FreeSync: Enable or disable AMD FreeSync for tear-free gaming (requires a compatible AMD graphics card).
3.3 Eye Care Technologies
The AOC 24V2Q incorporates advanced eye-care features:
- Flicker-Free Technology: Utilizes a DC (Direct Current) backlight system instead of PWM (Pulse Width Modulation) to eliminate flickering, reducing eye strain.
- Low Blue Light Mode: Reduces the emission of short-wave blue light, which can be harmful to the eyes, especially during prolonged use. This mode can be activated via the OSD menu.
4. Maintenance
4.1 Cleaning the Screen
To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, lightly dampen the cloth with water or a non-abrasive screen cleaner. Do not spray liquid directly onto the screen.
4.2 Cleaning the Casing
Wipe the monitor casing with a soft, dry cloth. Avoid using strong detergents or solvents, as they may damage the surface.
4.3 Storage
When storing the monitor for an extended period, disconnect all cables and pack it in its original packaging to protect it from dust and physical damage.
5. Troubleshooting
This section addresses common issues you might encounter with your AOC 24V2Q monitor.
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | No power; Incorrect video input; Loose cable connection | Check power cable connection; Press power button; Select correct input via OSD; Reconnect video cable securely. |
| Image is blurry or distorted | Incorrect resolution; Graphics driver issue | Set display resolution to 1920x1080; Update graphics drivers. |
| Colors appear incorrect | Color settings misconfigured | Adjust color settings in OSD; Reset OSD to factory defaults. |
| Screen flickering | Refresh rate mismatch; Cable issue | Ensure refresh rate is set to 75Hz; Try a different video cable. |
| Dead or stuck pixels | Manufacturing defect | Refer to AOC's pixel policy for warranty coverage. |
6. Specifications
Detailed technical specifications for the AOC 24V2Q monitor.
| Feature | Specification |
|---|---|
| Model Number | 24V2Q |
| Screen Size | 23.8 inches (60.4 cm) |
| Panel Type | IPS |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 75 Hz |
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Contrast Ratio (Typical) | 1000:1 |
| Viewing Angles | 178° (H) / 178° (V) |
| Video Inputs | 1 x HDMI 1.4, 1 x DisplayPort 1.2 |
| Audio Output | 3.5mm Headphone Jack |
| Special Features | AMD FreeSync, Flicker-Free, Low Blue Light, Clear Vision |
| Color | Black |
7. Warranty and Support
7.1 Manufacturer's Warranty
The AOC 24V2Q monitor comes with a 3-year manufacturer's warranty. Please refer to the warranty card included in your package or visit the official AOC website for detailed terms and conditions regarding warranty coverage and service procedures. Your statutory warranty rights remain unaffected.
7.2 Technical Support
For technical assistance, driver downloads, or further inquiries, please visit the official AOC support website or contact their customer service. Have your monitor's model number (24V2Q) and serial number ready when contacting support.
You can typically find support information and contact details on the manufacturer's website:
