1. Product Overview
The COSTWAY 30" Swivel Bar Stools are designed for comfort and durability, suitable for various settings such as kitchens, dining areas, pubs, and cafes. This set includes four bar stools with a vintage aesthetic, featuring a 360-degree swivel function and leather-padded seats.
- Steady and Stable Construction: Made of iron pipe, the frame is designed for strength and stability, supporting up to 250 lbs. Non-slip caps on the bottom protect floors and enhance stability.
- Considerate Craftsmanship: Features a built-in footrest for comfort and a 360-degree swivel seat for ease of movement and interaction.
- Retro and Vintage Outlook: The backrest features a vintage pattern, offering a classic and elegant design that complements various decor styles.
- Easy to Clean and Assemble: The finished surface is rust-proof and corrosion-resistant, allowing for easy cleaning with a damp cloth. Assembly is straightforward with included accessories and a manual.
2. Safety Information
Please read and understand all safety warnings before assembly and use.
- Weight Capacity: Do not exceed the maximum weight capacity of 250 lbs per stool. Exceeding this limit may result in damage or injury.
- Assembly: Ensure all components are properly assembled and tightened before use. Regularly check and retighten screws as needed to maintain stability.
- Placement: Always place the bar stool on a flat, stable surface to prevent tipping.
- Usage: Use caution when sitting down or standing up to avoid losing balance. Avoid leaning heavily on the backrest, especially if exceeding the weight limit.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 4 x Bar Stool (disassembled components)
- 1 x User's Guide
- Hardware Pack (screws, washers, Allen wrench, etc.)
4. Assembly Instructions
Assembly is required. Please follow these general steps. Refer to the included detailed manual for specific diagrams and part identification.
Figure 1: Product Dimensions
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Legs to Base Ring: Connect the stool legs to the lower circular base ring using the provided screws and Allen wrench. Do not fully tighten yet.
- Assemble Swivel Mechanism: Secure the swivel mechanism to the underside of the seat cushion. Ensure it is oriented correctly.
- Attach Seat to Leg Assembly: Connect the assembled seat with the swivel mechanism to the top of the leg assembly. Align the screw holes and insert the screws.
- Attach Backrest: Secure the backrest to the seat assembly using the designated screws.
- Final Tightening: Once all parts are loosely assembled, gradually tighten all screws evenly until secure. Do not overtighten.
- Check Stability: Gently rock the stool to ensure it is stable and does not wobble. Adjust screws if necessary.
Figure 2: Detail of Footrest and Base
Figure 3: Detail of Backrest Design
5. Operating Instructions
These bar stools are designed for straightforward use.
- Sitting: Approach the stool carefully and sit down gently. Avoid sudden movements.
- Swivel Function: The seat features a 360-degree swivel. To rotate, simply apply gentle pressure with your body in the desired direction.
- Footrest: Utilize the built-in footrest for added comfort and support while seated.
Figure 4: Assembled Bar Stool
6. Care and Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning: Wipe the faux leather seat and metal frame with a damp cloth. For stubborn stains on the faux leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Regular Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten as necessary to maintain structural integrity.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
- Protect Floors: The non-slip caps on the feet are designed to protect your floors. Ensure they are intact and replace if damaged.
7. Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions.
- Stool Wobbles:
Solution: Ensure the stool is on a flat, even surface. Check all assembly screws and tighten them evenly. Sometimes loosening all screws slightly, sitting on the stool to settle the components, and then retightening can resolve wobbling. - Swivel Mechanism is Stiff:
Solution: The swivel mechanism may require lubrication. Apply a small amount of silicone-based lubricant to the moving parts of the swivel plate. - Loose Parts:
Solution: Regularly inspect all nuts, bolts, and screws. Tighten any loose fasteners immediately to prevent further loosening or damage.
8. Specifications
Figure 5: Bar Stools in a Kitchen Environment
| Feature | Detail |
|---|---|
| Product Dimensions | 21.5"D x 21.5"W x 45.5"H |
| Color | Brown |
| Frame Material | Metal (Iron) |
| Seat Material Type | Faux Leather (Polyurethane) |
| Brand | COSTWAY |
| Style Name | Retro |
| Seat Height | 30 Inches |
| Maximum Weight Recommendation | 250 Pounds |
| Number of Pieces | 4 |
| Required Assembly | Yes |
| Product Care Instructions | Wipe with Damp Cloth |
9. Warranty and Support
This product comes with a standard return policy of 30 days for refund or replacement. For specific warranty details or further assistance, please refer to your purchase documentation or contact COSTWAY customer support.
Customer Support: For any questions, missing parts, or technical support, please visit the official COSTWAY website or contact their customer service department directly. Have your model number (HW54103-CYWH) and purchase date ready.
