Brookstone Super-Sized TV Remote User Manual

Introduction

This manual provides comprehensive instructions for the Brookstone Super-Sized TV Remote. Designed with oversized, easy-to-read buttons, this remote offers simplified control for your television and other compatible audio/video devices. Please read this manual thoroughly before use to ensure proper setup and operation.

Image: Front view of the Brookstone Super-Sized TV Remote, highlighting its large, easy-to-read buttons for various functions including TV, VCR, SAT, DVD, volume, and channel controls.

Setup

1. Battery Installation

The Brookstone Super-Sized TV Remote requires 2 AA batteries (not included).

1. Locate the battery compartment on the back of the remote control.
2. Press down on the latch and slide the battery cover off.
3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Image: Rear view of the Brookstone Super-Sized TV Remote, displaying the battery compartment located at the bottom, ready for battery insertion.

2. Programming the Remote

This remote is designed to be compatible with hundreds of popular brands of A/V devices. Refer to the included code list (if applicable) or follow these general programming steps:

1. Turn on the device you wish to program (e.g., TV, VCR, DVD).
2. Press and hold the corresponding device button on the remote (e.g., TV, VCR, DVD) until the indicator light on the remote illuminates.
3. While holding the device button, enter the 3-digit code for your device's brand. (Codes are typically found in a separate programming guide or online).
4. Release the device button. The indicator light should turn off.
5. Test the remote by pressing the Power button. If the device turns off, the programming was successful.
6. If the device does not respond, repeat the steps with the next code listed for your brand, or try the auto-code search method if available in a detailed programming guide.

Note: For detailed programming instructions and a complete list of device codes, please refer to the full programming guide that came with your remote or visit the manufacturer's support website.

Operating Instructions

The Brookstone Super-Sized TV Remote features large, clearly labeled buttons for ease of use. Below is a guide to the primary functions:

• Device Selection Buttons (TV, VCR, SAT, DVD, CAB, AUD): Press one of these buttons to select the device you wish to control. The remote will then send commands to that specific device.
• Power Button (On/Off): Turns the selected device on or off.
• MUTE Button: Mutes or unmutes the audio of the selected device.
• Number Buttons (0-9): Used to enter channel numbers or other numerical inputs.
• VOLUME (+ / -) Buttons: Increases or decreases the volume of the selected device.
• CHANNEL (+ / -) Buttons: Changes the channel up or down on the selected device.
• OK Button: Confirms selections or enters menus.
• INPUT Button: Cycles through the input sources (e.g., HDMI 1, HDMI 2, AV) on your television.
• Playback Control Buttons (REC, Stop, Pause, Play, Rewind, Fast Forward): Control playback functions for devices like DVD players, VCRs, or DVRs.
• MENU Button: Opens the on-screen menu of the selected device.
• BACK Button: Returns to the previous screen or exits a menu.

Maintenance

• Cleaning: To clean the remote, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.
• Battery Replacement: Replace batteries when the remote's performance degrades or the indicator light does not illuminate. Always replace both batteries at the same time with new AA batteries.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

• Remote not responding:
  • Ensure fresh batteries are correctly installed.
  • Point the remote directly at the device's infrared sensor.
  • Verify that the correct device button (TV, DVD, etc.) is selected.
  • Reprogram the remote for your device.
• Only some buttons work:
  • This may indicate an incorrect or incomplete programming code. Try reprogramming with a different code for your brand.
  • Ensure the remote is in the correct device mode for the function you are trying to perform.
• Indicator light does not illuminate:
  • Check battery installation and replace batteries if necessary.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly. You can typically find contact details on the product packaging or the official Brookstone website.

For further assistance, please visit: www.brookstone.com