Amazon Basics TT1001

Amazon Basics Small Digital Oval Alarm Clock User Manual

Model: TT1001

1. Product Overview

The Amazon Basics Small Digital Oval Alarm Clock is designed for simplicity and functionality, featuring a clear LED display, a gentle nightlight, and a battery backup system to ensure time and alarm settings are retained during power interruptions. Its compact size makes it suitable for various spaces.

Front view of the Amazon Basics Small Digital Oval Alarm Clock showing the green LED display with time 12:15.

Figure 1: Front view of the Amazon Basics Small Digital Oval Alarm Clock.

Front view of the Amazon Basics Digital Alarm Clock highlighting its 0.7 inch LED display, repeating snooze function, and built-in nightlight option.

Figure 2: Key features of the Amazon Basics Digital Alarm Clock.

2. Safety Information

  • Do not expose the clock to water or excessive humidity.
  • Avoid placing the clock near heat sources or in direct sunlight.
  • Use only the specified power source (AC 120V, 60Hz).
  • Do not attempt to open or repair the clock yourself. Refer to qualified service personnel.
  • Keep out of reach of children.

3. Package Contents

Ensure all items are present and in good condition upon unpacking:

  • Amazon Basics Small Digital Oval Alarm Clock (with integrated power cord)
  • User Manual (this document)

Note: 1 AA battery (for backup) is required but not included.

4. Setup

4.1 Powering the Clock

The clock operates primarily on AC power. It also features a battery backup system to maintain time and alarm settings during power outages.

  1. Connect to AC Power: Plug the integrated power cord into a standard 120V AC wall outlet. The LED display will illuminate.
  2. Side view of the Amazon Basics Digital Alarm Clock showing the attached power cord.

    Figure 3: Clock with integrated power cord.

  3. Install Battery Backup (Optional but Recommended):
    • Locate the battery compartment on the bottom of the clock.
    • Open the battery compartment cover.
    • Insert one 9V battery (not included) into the compartment, observing the correct polarity (+/-).
    • Close-up view of the battery compartment on the underside of the Amazon Basics Digital Alarm Clock, showing a 9V battery inserted.

      Figure 4: Battery compartment with 9V battery installed.

    • Close the battery compartment cover securely.

    The battery backup ensures that the time and alarm settings are preserved for up to 8 hours during a power outage, though the display will not be illuminated.

5. Operating Instructions

The control buttons are located on the top and back of the clock for easy access.

Top-down view of the back of the Amazon Basics Digital Alarm Clock, showing the control buttons for HR, MIN, ALARM (OFF/ON), SET TIME, SET ALARM, LIGHT, and the SNOOZE bar.

Figure 5: Rear view of the clock with control buttons.

5.1 Setting the Time

  1. Locate the SET TIME button on the back of the clock.
  2. Press and hold the SET TIME button. The hour digits on the display will begin to flash.
  3. While holding SET TIME, press the HR button repeatedly to advance the hour. Observe the PM indicator for correct AM/PM setting.
  4. Release the SET TIME button, then press and hold it again. The minute digits will flash.
  5. While holding SET TIME, press the MIN button repeatedly to advance the minutes.
  6. Release the SET TIME button to save the current time.

5.2 Setting the Alarm

  1. Locate the SET ALARM button on the back of the clock.
  2. Press and hold the SET ALARM button. The alarm hour digits on the display will begin to flash, and the AL indicator will light up.
  3. While holding SET ALARM, press the HR button repeatedly to set the alarm hour. Observe the PM indicator for correct AM/PM setting.
  4. Release the SET ALARM button, then press and hold it again. The alarm minute digits will flash.
  5. While holding SET ALARM, press the MIN button repeatedly to set the alarm minutes.
  6. Release the SET ALARM button to save the alarm time.

5.3 Activating/Deactivating the Alarm

Use the ALARM OFF/ON slide switch on the back of the clock to enable or disable the alarm function.

  • Slide to ON: The AL indicator on the display will light up, indicating the alarm is active.
  • Slide to OFF: The AL indicator will turn off, indicating the alarm is deactivated.

5.4 Using the Snooze Function

When the alarm sounds, press the large SNOOZE bar located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

5.5 Nightlight Function

The clock features a built-in nightlight. Use the LIGHT slide switch on the back of the clock to turn the nightlight on or off.

6. Maintenance

6.1 Cleaning

  • Unplug the clock from the power outlet before cleaning.
  • Wipe the exterior of the clock with a soft, dry cloth.
  • Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.

6.2 Battery Replacement

If the clock experiences frequent power outages or if the battery backup function seems unreliable, it may be time to replace the 9V battery. Follow the steps in Section 4.1 to replace the battery.

7. Troubleshooting

ProblemPossible CauseSolution
Display is blank.No AC power; power outage.Ensure the clock is plugged into a working outlet. If there's a power outage, the display will be off, but time/alarm settings are retained by the backup battery.
Alarm does not sound.Alarm is not activated; alarm time is incorrect.Check the ALARM OFF/ON switch is set to ON. Verify the alarm time is set correctly (AM/PM).
Time is incorrect after power interruption.Backup battery is dead or not installed.Install or replace the 9V backup battery.
Nightlight not working.Nightlight switch is off.Ensure the LIGHT switch is set to ON.

8. Specifications

FeatureDetail
Model NumberTT1001
Display TypeDigital LED (Green)
Display Size0.7 inches
Power SourceCorded Electric (AC 120V, 60Hz)
Battery Backup1 x 9V battery (not included)
Dimensions (LxWxH)4.5 x 3.5 x 2.4 inches (11.53 x 8.86 x 6.02 cm)
Weight0.41 pounds (6.6 oz)
Special FeaturesNightlight, Repeating Snooze
ColorBlack
MaterialPlastic
Country of OriginChina
Side view of the Amazon Basics Digital Alarm Clock with dimensions labeled: 4.54 inches length, 3.39 inches width, and 2.37 inches height.

Figure 6: Product dimensions.

9. Warranty and Support

9.1 Warranty Information

This Amazon Basics product is covered by a 6-month manufacturer's warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.

9.2 Customer Support

For technical support, warranty claims, or general inquiries, please visit the official Amazon Basics support page or contact Amazon customer service directly. Refer to your purchase documentation for specific contact details.

You can also find additional resources and frequently asked questions on the Amazon Basics Store Page.

© 2025 Amazon Basics. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.