HALIEVE IAF-H-100B

HALIEVE Replacement Idylis Air Purifier Filter B User Manual

Model: IAF-H-100B

Product Overview

This manual provides instructions for the HALIEVE Replacement Idylis Air Purifier Filter B, a 2-pack set including both HEPA and Carbon filters. These filters are designed to maintain the air quality performance of compatible Idylis air purifiers by capturing airborne particles and odors.

Two sets of Idylis replacement filters, each set containing one white HEPA filter and one black carbon filter.

Image: A complete set of two HEPA filters and two carbon filters, as included in the package.

Compatibility

These replacement filters are compatible with the following Idylis Air Purifier models:

  • IAP-10-050: Requires 1 Idylis B filter.
  • IAP-10-125: Requires 2 Idylis B filters.
  • IAP-10-150: Requires 1 Idylis A filter and 1 Idylis B filter. (Note: This product provides Idylis B filters only.)
  • AC-2125 (AC2125, 2125): Requires 2 Idylis B filters.
  • AC-2126 (AC2126, 2126): Requires 2 Idylis B filters.
  • Also compatible with old numbers: 0302652, 302652, 0302653, 302653, LOWESRAPF-B-4, LOWESRAPFB4, 0412558, 412558, 0302649, IAPC-40-140.

The model number for these replacement filters is IAF-H-100B (IAFH100B).

Setup and Installation

Follow these steps to replace the filters in your Idylis Air Purifier. Always refer to your specific air purifier's manual for detailed instructions on opening the unit.

  1. Power Off and Unplug: Before beginning, ensure your air purifier is turned off and unplugged from the power outlet to prevent electrical hazards.
  2. Access Filter Compartment: Locate and open the filter compartment on your Idylis air purifier. This usually involves removing a front or back panel, or twisting a base. Consult your air purifier's manual if unsure.
  3. Remove Old Filters: Carefully remove the used HEPA and carbon filters from the compartment. Note their orientation for correct installation of the new filters. Dispose of old filters responsibly.
  4. Install New Carbon Filters: The carbon filters are typically thin, black sheets. Place the new carbon filters into their designated slots. Ensure they lay flat and cover the entire area.
  5. Two black carbon pre-filters for an air purifier.

    Image: The two carbon filters included in the package.

  6. Install New HEPA Filters: The HEPA filters are thicker, pleated white filters. Insert the new HEPA filters into the compartment, ensuring they are seated correctly and securely. The orientation (which side faces out) may be indicated on the filter frame or in your air purifier's manual.
  7. A single white HEPA filter with a pleated surface.

    Image: A single HEPA filter, showing its pleated design.

  8. Close Compartment: Securely close the filter compartment door or panel.
  9. Restore Power: Plug the air purifier back into the power outlet and turn it on.
  10. Reset Filter Indicator (if applicable): Many air purifiers have a filter replacement indicator light. Refer to your air purifier's manual for instructions on how to reset this indicator after installing new filters.

Operating Principles

The HALIEVE Replacement Idylis Air Purifier Filter B set consists of two types of filters working in conjunction:

  • HEPA Filter: The High-Efficiency Particulate Air (HEPA) filter is designed to capture 99.97% of airborne particles as small as 0.3 microns. This includes dust mites, pet dander, pollen, mold spores, and other allergens.
  • Activated Carbon Filter: The activated carbon filter is highly effective at absorbing odors, volatile organic compounds (VOCs), and other gaseous pollutants from the air. This helps to neutralize unpleasant smells from cooking, pets, smoke, and more.

Together, these filters provide comprehensive air purification, improving the overall air quality in your environment.

Maintenance

Regular replacement of your air purifier filters is crucial for maintaining optimal performance and air quality. The lifespan of the filters can vary based on usage and air quality conditions.

  • Replacement Frequency: It is recommended to replace both the HEPA and Carbon filters every 3 to 6 months. Heavily polluted environments or continuous use may necessitate more frequent replacement.
  • Visual Inspection: Periodically inspect the filters for visible signs of dirt, dust accumulation, or discoloration. A heavily soiled filter indicates it's time for replacement.
  • Disposal: Used filters should be disposed of with regular household waste. They are not recyclable due to the trapped pollutants.

Troubleshooting

If you encounter issues after replacing your filters, consider the following common problems and solutions:

  • Filter Not Fitting Correctly:
    • Ensure you have the correct filter type (Idylis B) for your specific air purifier model. Refer to the "Compatibility" section.
    • Check the orientation of the filter. Some filters have a specific direction for installation.
    • Verify that no debris is obstructing the filter compartment.
  • Air Purifier Not Turning On After Replacement:
    • Confirm the air purifier is securely plugged into a working power outlet.
    • Ensure the filter compartment door/panel is fully closed and latched. Many purifiers have a safety switch that prevents operation if the compartment is open.
  • Filter Change Indicator Light Remains On:
    • Most air purifiers require a manual reset of the filter indicator light after replacement. Consult your air purifier's user manual for the specific reset procedure. This often involves pressing and holding a button for a few seconds.
  • Reduced Airflow or Odor Persistence:
    • Ensure both the HEPA and carbon filters are installed.
    • Verify that the filters are clean and not obstructed by large debris.
    • If the issue persists shortly after replacement, ensure the filters are genuine and not counterfeit.

Specifications

AttributeDetail
Product NameHALIEVE Replacement Idylis Air Purifier Filter B
Model NumberIAF-H-100B
Filter TypeHEPA and Activated Carbon
Dimensions (L x W x Th)7.9" x 6.7" x 1.4" inches
Item Weight0.44 Pounds (approx. 7 ounces)
Package Contents2 HEPA Filters, 2 Carbon Filters
Recommended ReplacementEvery 3-6 months
A HEPA filter with dimensions labeled: 6.7 inches width, 7.9 inches height, and 1.4 inches thickness.

Image: Dimensions of the HEPA filter.

Warranty and Support

HALIEVE is committed to customer satisfaction. If you have any questions, concerns, or require assistance with your replacement filters, please do not hesitate to contact us. We offer a 100% satisfaction guarantee.

For support, please refer to the contact information provided with your purchase or on the product packaging.

© 2024 HALIEVE. All rights reserved.