EPtech AC/DC Adapter Instruction Manual

1. Product Overview

The EPtech AC/DC Adapter (Model A1806091266) is a replacement power supply designed to provide reliable power to various electronic devices. It features a wide input voltage range (100-240VAC) and multiple safety protections to ensure stable and safe operation.

Compatible Devices:

• Homedics QRM-400, QRM-400H, QRM400 Quad Roller Massage Chair Massaging Cushion
• Homedics NMS-630H Cordless Massager
• Homedics BMS-5, BMS-5H Body Massager Mat System
• Homedics LSS-10, LSS-10H, BMS-10, BMS-10H 10-Motor Seat Back Masseur Body Heater Chair Cushion Massager
• Radio Shack Citizens Band Transceiver TRC-225 Cat.No. 210-1647
• Other devices requiring 12V DC, 2.5A (30W) power with a compatible barrel connector.

Image 1.1: The EPtech AC/DC Adapter, showing the main adapter unit and its detachable power cord.

2. Setup Instructions

1. Unpack the Adapter: Carefully remove the AC/DC adapter and power cord from its packaging. Inspect for any visible damage.
2. Connect the Power Cord: Insert the figure-8 connector of the AC power cord into the corresponding port on the adapter unit. Ensure it is firmly seated.
3. Connect to Device: Plug the barrel connector of the adapter's output cable into the power input port of your compatible device (e.g., Homedics massage cushion).
4. Connect to Power Outlet: Plug the AC power cord into a standard wall outlet (100-240VAC, 50/60Hz).
5. Verify Connection: A blue LED indicator on the adapter unit will illuminate when power is supplied, indicating it is ready for use.

Important Safety Note: This adapter is designed for indoor use only. Connect only to grounded outlets.

Image 2.1: The adapter unit with the AC power cord connected, ready to be plugged into a wall outlet.

Image 2.2: Illustration of the adapter's components, including the anti-interference ring on the output cable and the blue LED power indicator. The output cable is approximately 4 feet long, and the input power cord is approximately 6 feet long.

3. Operating Instructions

Once the adapter is properly connected to both the device and a power outlet, your device should be ready for operation. Refer to your device's specific instruction manual for details on its power-on sequence and functions.

• Power Indicator: The blue LED on the adapter indicates that it is receiving power and functioning correctly.
• Disconnection: To disconnect power, first turn off your device, then unplug the adapter from the wall outlet, and finally disconnect it from your device.

4. Maintenance

• Cleaning: Ensure the adapter is unplugged from the power outlet and your device before cleaning. Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid wrapping the cables too tightly to prevent damage.
• Inspection: Periodically inspect the adapter and cables for any signs of wear, cuts, or damage. If damage is found, discontinue use and replace the adapter.

5. Troubleshooting

6. Specifications

Image 6.1: Illustration of the power cable's internal structure, highlighting high-quality copper wire and PVC insulation for durability and safety.

7. Warranty and Support

Warranty Information:

• This EPtech product includes a 90-day Money-Back Guarantee.
• A 1-year limited warranty is also provided.

Customer Support:

If you have any questions or encounter problems with your EPtech AC/DC Adapter, please contact customer service:

• Email: epcustomerservice@yahoo.com