Schumacher Electric CR6

Schumacher Electric Charge 'N Ride CR6 6V/12V Automatic Universal Battery Charger Instruction Manual

Model: CR6 | Brand: Schumacher Electric

Introduction

The Schumacher Electric Charge 'N Ride CR6 is a fully automatic 6V/12V battery charger designed for ride-on toys. It features advanced multi-stage charging, auto voltage detection, float mode monitoring, and bad battery detection to ensure reliable and safe charging. This charger is compatible with a wide range of popular ride-on toy brands.

Schumacher Electric Charge 'N Ride CR6 6V/12V Automatic Universal Battery Charger

Image: The Schumacher Electric Charge 'N Ride CR6 charger, showing its compact design and label with voltage and current information.

Safety Information

  • Use this product only as directed in this manual.
  • Always refer to the product label for specific instructions and warnings.
  • Ensure proper ventilation during charging.
  • Avoid connecting the charger to a damaged battery.
  • The charger features reverse hook-up protection to prevent damage if connected incorrectly.

Setup

What's Included

Your Schumacher Electric Charge 'N Ride CR6 package includes:

  • Schumacher Electric Charge 'N Ride CR6 3 Amp Universal 12V/6V Battery Charger
  • TAPP12V Peg Perego battery cable connector
  • TAH6V Kid Trax/Rollplay battery cable connector
  • User manual
Contents of Schumacher Electric Charge 'N Ride CR6 package including charger and two cable connectors

Image: The CR6 charger with its included TAPP12V Peg Perego and TAH6V Kid Trax/Rollplay battery cable connectors.

Connecting the Charger

  1. Match the Cable Connector: Select the appropriate battery cable connector (TAPP12V for Peg Perego or TAH6V for Kid Trax/Rollplay) that matches your ride-on toy's battery connector. Connect it securely to the charger.
  2. Connect to Battery: Connect the chosen cable connector to the battery of your ride-on toy. Ensure a secure connection. The charger features reverse hook-up protection to prevent damage from incorrect connection.
  3. Plug into Power: Plug the battery charger into a standard 120V AC household outlet. The power LED on the charger will illuminate.
Quick start guide showing steps to connect the charger to a ride-on toy battery and then to a wall outlet.

Image: A visual quick start guide demonstrating the connection process for the charger to a ride-on toy battery and a power outlet.

Video: Demonstrates the Schumacher CR6 3A 6/12V Universal Charger for Ride-on Toys in use, showing how to connect it to a ride-on toy battery.

Operating the Charger

Charging Process

The CR6 charger is fully automatic. Once connected correctly and plugged into power, it will begin the charging process.

  • LED Indicators: The charger features LED indicators to show the charging status.
  • When the Charging/Charged LED is lit, charging is in progress.
  • When the battery is approximately 80% charged, the Charging/Charged LED will begin to flash.
  • Once the battery is fully charged, the Charging/Charged LED will turn off.
Schumacher Electric Charge 'N Ride CR6 charger connected to a ride-on toy battery, with the charging indicator light illuminated.

Image: The CR6 charger connected to a ride-on toy, showing the illuminated charging indicator.

Maintain Mode

The CR6 charger includes a maintain mode. After the battery is fully charged, the charger will automatically switch to float mode monitoring. This keeps the battery healthy and in top condition without overcharging, allowing you to leave it connected for extended periods.

Video: A general "How to Use" video for a charger, demonstrating the connection to a toy and the indicator lights for charging status.

Maintenance

To ensure optimal performance and longevity of your CR6 charger and ride-on toy batteries:

  • Keep the charger clean and dry.
  • Store the charger in a cool, dry place when not in use.
  • Regularly inspect cables and connectors for any signs of damage.
  • The maintain mode helps keep batteries healthy, ready for action, and in top condition.

Troubleshooting

If you encounter issues with your CR6 charger, refer to the following:

  • No Power LED: Ensure the charger is securely plugged into a working 120V AC outlet.
  • Charging/Charged LED not illuminating: Verify that the battery cable connectors are properly attached to the ride-on toy battery.
  • Bad Battery Detection: The charger features bad battery detection. If the charger indicates a bad battery, it may not be able to charge it. Consult a professional for battery assessment.
  • Reverse Hook-up Protection: If the charger is connected incorrectly (reverse polarity), the reverse hook-up protection will prevent damage to both the charger and the battery. Correct the connection.

Specifications

ModelCR6
Input Voltage120V AC, 60Hz, 0.92A
Output Voltage6V DC / 12V DC
Output Current3 Amps
Item Weight1.4 pounds
Product Dimensions3.18 x 6.78 x 2.7 inches

Compatibility

The CR6 charger is compatible with 3- and 4-wheel powered ride-on toy batteries from various brands, including:

  • Action Wheels
  • Dynacraft
  • Huffy
  • Kid Trax
  • Peg Perego
  • Power Wheels
  • Pulse Performance Products
  • Razor
  • Rollplay
Compatibility chart for Schumacher chargers and batteries with various ride-on toy brands.

Image: A chart detailing the compatibility of Schumacher chargers, including the CR6, with different ride-on toy brands.

Warranty

For detailed warranty information, please refer to the documentation included with your product or visit the official Schumacher Electric website.

Support

If you have any questions, require technical assistance, or need to provide feedback, please contact Schumacher Electric Customer Support:

Schumacher Customer Support graphic with contact information.

Image: Schumacher Customer Support information, including phone and email.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.