1. Introduction
The G-Lab KORP-OXYGEN is a high-performance gaming headset designed for an immersive audio experience across multiple platforms. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your headset to ensure optimal performance and longevity.
Figure 1: The G-Lab KORP-OXYGEN Performance Gaming Headset.
Key Features:
- High-Quality Audio: Equipped with 40mm alloy speakers for remarkable audio clarity and powerful sound.
- Detachable Microphone: Offers flexibility for gaming communication or general audio listening. The microphone arm is flexible for precise positioning.
- X-TRA BASS Stereo Technology: Delivers powerful bass for an enhanced gaming, music, and movie experience.
- Lightweight Design: Weighing only 220 grams with a comfortable foam-covered headband for extended use.
- Multi-Platform Compatibility: Compatible with PS4, PC, Nintendo Switch, Xbox One, Xbox One X, smartphones, and tablets via a 3.5mm jack.
2. Setup
Follow these steps to set up your KORP-OXYGEN headset with your device.
Figure 2: Headset with detachable microphone and inline control.
- Connect the Microphone (Optional): If you intend to use voice chat, gently insert the detachable microphone into the dedicated port on the left earcup until it clicks into place. Ensure it is firmly seated.
- Connect to Device: Plug the 3.5mm jack cable from the headset into the corresponding audio port on your gaming console (PS4, Xbox One, Nintendo Switch), PC, smartphone, or tablet.
- Adjust Volume: Locate the inline volume control on the headset cable. Rotate the wheel to adjust the audio volume to your desired level.
- Microphone Mute/Unmute: Use the switch on the inline control to mute or unmute the microphone. Ensure it is in the "ON" position for voice communication.
- Position Microphone: If using the microphone, gently bend the flexible arm to position the microphone near your mouth for clear voice pickup.
Note: For some PC setups, you may require a Y-splitter cable (not included) if your PC has separate audio input (microphone) and output (headphone) jacks.
3. Operation
Operating your KORP-OXYGEN headset is straightforward. Here are the primary functions:
Figure 3: Inline volume control and microphone switch.
- Audio Playback: Once connected, audio from your device will be routed through the headset. Adjust the volume using the inline control or your device's volume settings.
- Microphone Usage:
- Ensure the microphone is securely attached.
- Slide the switch on the inline control to the "ON" position to activate the microphone.
- Slide the switch to the "OFF" position to mute the microphone.
- Adjust the flexible microphone arm for optimal voice clarity.
- Comfort Adjustment: The headband is adjustable. Gently slide the earcups up or down to find a comfortable fit that fully covers your ears. The foam padding on the earcups and headband provides comfort for long gaming sessions.
4. Maintenance
Proper care and maintenance will extend the life of your KORP-OXYGEN headset.
- Cleaning:
- Use a soft, dry cloth to wipe down the earcups and headband.
- For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
- Do not immerse the headset in water or any liquids.
- Storage:
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid tangling the cable. Consider wrapping it loosely or using a cable tie.
- If the microphone is detachable, you may remove it for storage to prevent damage.
- Handling:
- Avoid pulling the cable forcefully when disconnecting the headset. Always grasp the plug.
- Do not twist or bend the microphone arm excessively.
5. Troubleshooting
If you encounter issues with your KORP-OXYGEN headset, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headset. |
|
|
| Microphone not working. |
|
|
| Sound distortion or static. |
|
|
If the problem persists after trying these solutions, please contact G-LAB customer support or refer to their official website for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | THE G-LAB |
| Model Name | KORP-OXYGEN |
| Connectivity Technology | Wired (3.5mm Jack) |
| Driver Size | 40mm |
| Frequency Range | 20 Hz - 20,000 Hz |
| Impedance | 32 ohms |
| Microphone | Detachable, Flexible |
| Weight | 220 grams |
| Material | Leather (earcups/headband padding) |
| Color | Black |
| Ear Placement | Over-ear (Supra-auriculaire) |
| Control Type | Inline Tactile Control (Volume, Mic On/Off) |
| Compatibility | PS4, PC, Nintendo Switch, Xbox One, Xbox One X, smartphones, tablets |
7. Warranty and Support
For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official THE G-LAB website. Warranty terms and conditions may vary by region and retailer.
If you require technical support or have questions not covered in this manual, please contact THE G-LAB customer service through their official website or the contact information provided with your product packaging.
Official Website: www.the-g-lab.com